Street Lighting circuit

Slides:

Advertisements

Similar presentations

BJT, Bipolar Junction Transisor

Advertisements

EC 2208 – Electronic Circuits Lab 1

Resistor An electrical component that limits or regulates the flow of electrical current in an electronic circuit.

Electronic Components

+ Using Ohm’s Law to Build a Voltage Divider 1. + Learning Objectives Understand and demonstrate the engineering design process Use Ohm's Law as a tool.

Electronic Component Functions What is this component doing my in electronic device?

Electronics Chapter 53 What is Electronics? Electronics is the careful and exact control of very small electric currents. It is used in many small devices.

Module 2 Bipolar Junction Transistor. Learning Outcomes 1.The 3 terminals or regions of a BJT. 2.Construction and symbol of NPN and PNP types 3.Low power.

Teaching note Just in case you have never tried this before. This is split into 6 spaced learning presentations. The idea is that each one is presented.

A Seminar on ELECTRONIC EYE

Electronics “the science that deals with the control of electrons in an electrical circuit or system” 16th Jan.

gradually rises from 0 to 9V immediately drops from 9V to 0V

Electrical Circuits Utah Underwater Robotics Instruction Slides.

ELECTRONICS WHAT DOES ‘ELECTRONICS’ MEAN TO YOU ?.

DC Circuits. Topics 1.Circuit Symbols 2.5 principles of DC Circuits 3.2 tips for solving DC Circuits 4.Putting it all together – Electricity Problem Solving.

BJTs. Transistor The transistor is the main building block “element” of electronics. A transistor is a semiconductor device used to amplify and switch.

+ Using Ohm’s Law to Build a Voltage Divider 1. + Learning Objectives Understand and demonstrate the engineering design process Use Ohm's Law as a tool.

Voltage, V Voltage tells us how hard a positive charge is pushed between two different points. Something, such as a battery, is needed to create a voltage.

Name: ________________ Class: _________________ Index: ________________ D.C. Circuit.

4/17/10. Electric Circuits Circuit = Any path along which electrons can flow For a continuous flow of electrons, there must be a complete circuit with.

Electronic Components Circuit/Schematic Symbols. RESISTOR Resistors restrict the flow of electric current, for example a resistor is placed in series.

Electronic Parts.

How an NPN Transistor Works

Electronics Speaker Project Mr Sanders.

Electronic. Analog Vs. Digital Analog –Continuous –Can take on any values in a given range –Very susceptible to noise Digital –Discrete –Can only take.

AUTOMATIC STREET LIGHT CONTROL USING LDR

ELECTRONIC COMPONENT BILINGUAL SECTION TECHNOLOGY.

School of Physics and Astronomy How to make a dark detecting torch Chris Staddon – Senior Experimental Officer & Outreach Officer Michael Forrester – Student.

18240 Element two - Components INPUTS OUTPUTS PURPOSE TYPICAL USE.

Introduction to Electronic Circuits Khansaa Almansor.

6.2 ELECTRONICS. CAPACITOR An electrical device used to store electrical charge.

Ammeter voltmeter cell Indicator / light source diode Light emitting diode resistor Variable resistor thermistor Light dependent resistor heater Electric.

Electric Circuits Chapter Notes. Electric Circuits Any path along which electrons can flow is a circuit A gap is usually provided by an electric.

Regions of a Transistor A Bipolar Junction Transistor is a three terminal device containing 3 regions: Emitter, Base and Collector.

GRADE 9 ELECTRONICS Introducing Components Developed by Johnny Freese EMDC SOUTH. Adapted by Alistair Mather.

Starter: use Pg to complete the table

BASICS OF ELECTRONICS.

Connect 4 Change the terms in the following template to customize Connect 4 for any topic. You will need to copy one copy of one of the two templates.

Recall Last Lecture Biasing of BJT Three types of biasing

Recall Last Lecture Biasing of BJT Three types of biasing

AUTOMATIC STREET LIGHT CONTROL USING LDR

Series Circuit.

Electronic Components

EELE 2321 – Electronics Spring, 2013 Bipolar Junction Transistor (BJT) Structure Eng. Wazen M. Shbair.

SUN SET TO SUN RISE LIGHTING SWITCH (EVENING ON TO MORNING OFF)

Basic Electronics.

Recall Lecture 13 Biasing of BJT Voltage Divider Biasing Circuit.

Electronics – Learning Outcomes

Basic Electronics Year 10.

Transistor & Voltage Divider

RESISTORS A resistor is used to reduce the flow of electricity in an electric circuit. Resistorscome in fixed or variable types.

Components and Schematics

Match the circuit symbols How many of these can you name?

ELECTRICAL CIRCUIT BOARDS

BASIC ELECTRONICS - Basic electronic component:- V Sr.No

Ohms Law required Practical

Electronics Objectives

Bipolar Junction Transistor

Recall Lecture 10 Introduction to BJT 3 modes of operation

(2 or more cells in series)

How an NPN Transistor Works

P2 - Physics Circuits.

Describe the action of thermistors and light- dependent resistors and show understanding of their use as input transducers Thermistor A transducer is an.

BY: Sai Kiran Reddy Dwarampudi

Electronic systems 7.

BASIC ELECTRONICS - Basic electronic component:- V Sr.No

Presentation transcript:

Street Lighting circuit Dr.Ferial AlGabr Digital Electronics www.Engg-know.com

-The circuit uses a Light Dependent Resistor (LDR) to sense the light Description 1 -The circuit diagram present here is that of a street light that automatically switches ON when the night falls and turns OFF when the sun rises. -The circuit uses a Light Dependent Resistor (LDR) to sense the light 1 www.Engg-know.com

Tools 1- Transistor(2N2222A). 2- Vcc=6v. 3- Resistors: a- R1=75Ω b- Re=2.5kΩ c- Ro=1kΩ d- LDR(R2). 4-Light Emitting Diode.(LDR) www.Engg-know.com

(LDR)Light Dependent Resistor 3 What is LDR? ( Light Dependent Resistor) and symbolizes it short LDR is electrical resistance sensitive to light, changing resistance of about 1,000,000 ohms to zero resistance when light falls on it . Note that the resistor we have its values vary from 300kΩ to 10kΩ when light falls on it. Application Among the most famous applications street lamps, which used to automatic turn them on and off. www.Engg-know.com

LED(Light Emitting Diode) 4 What is LED? Light Emitting Diode is a light source made of semiconductor materials send light when an electric current passes through it. Characteristics of LED. Consumption of electrical power is low, can be operated with small batteries, a long old, bear the shock, and is small in size. www.Engg-know.com

2.Voltage divider method. Steps: 5 1.Transistor as a switch. Transistor is used in the saturation region and cut off region. In the saturation region the transistor is in the conduction mode and Vce is nearly equal to 0.In the cut off region the transistor is in the cut off mode and Vce=Vcc & Ic=Ie=0. 2.Voltage divider method. This method allows us to control the base resistance and voltage applied to the base because the base resistance is equal to R1//R2. www.Engg-know.com

Steps www.Engg-know.com 6 3.Why do we use R1 at value 75kΩ? Cut off region: Vce=Vcc ,Ie=Ic=0 ,so we assume that R1>R2 , so Veq<=0.7v ,soR1>=75kΩ Saturation region: Ic=Ie & Vce=0 R1<=162kΩ Comparing the values in the two conditions we find that : Cut off region: R1>=75kΩ Saturation region: R1<=162kΩ So R1’s values are between(75kΩ and 162kΩ) We choose R1=75kΩ www.Engg-know.com

How the circuit works 1- Cut off region. www.Engg-know.com 7 In the daytime ,LDR's value is small ,where its value is up to 10kΩ,hence when current comes from Vcc and because LDR's value is small ,current is distributed and current IB is small (low) and Veq is low , so the transistor will be in nonconduction mode (off state) current Ie=Ic=0 the current will not pass for LED lighting. www.Engg-know.com

How the circuit works 2-Saturation region www.Engg-know.com 8 At night , LDR's value is big ,where its value is up to 300kΩ , hence when current comes from Vcc and because LDR's value is big , current does not flow through LDR (open circuit) and all the current will flow toward the transistor , where IB is high and Veq is high, so the transistor is in conduction mode (on state) Current flows and LED lights. www.Engg-know.com

Summary 9 1.The street lighting can be controlled by using transistor as switch. 2.Transistor is designed as switch in conduction mode and cut off mode www.Engg-know.com