P4T™ and RP4T™ Mobile Printer An introduction to the Thermal Transfer and RFID mobile {Name} {Company name}

The Zebra P4T/RP4T The P4T and RP4T are radical new additions to the Zebra mobile printer portfolio; broadening the application base into which mobile printing solutions can be implemented.

Introducing the P4T/RP4T The P4T/RP4T is a thermal-transfer mobile printer with UHF RFID printing/encoding capability. A world first…! It re-introduces a thermal transfer mobile printer to the portfolio, and reinforces Zebra’s position as a technology leader/pioneer. It is the first of Zebra’s ‘Intelligent Mobile Printers’ with smart end user features. There are two primary models: The P4T and RP4T are sister products. They have the same appearance and ergonomics and share the same internal architecture and design specification. The fundamental difference between the two is that the RP4T is shipped with a built in UHF RFID encoder, while the P4T is RFID upgradable at a later date should such technology be required in the future. With a thermal-transfer printhead, Zebra mobile printing solutions can once again be incorporated in demanding outdoor labelling applications where longevity of label life is paramount. The RFID element further expands the markets into which this product can be sold. Mobile RFID printing is a genuine world first by Zebra Technologies. P4T – thermal-transfer mobile printer RP4T – thermal-transfer mobile printer with RFID encoder Note: The P4T has an RFID upgrade path should a customer have a future need for RFID encoding. The RP4T ships with an RFID encoder pre-installed.

Introducing the P4T/RP4T Why did we develop the P4T and RP4T…? Niche applications that require thermal-transfer printing in a mobile platform. This need was previously fulfilled by the PT400, which was discontinued in 2005 due to supplier RoHS issues. We foresee significant opportunities for thermal-transfer mobile printing in niche applications. The nature of these applications has synergy with RFID either now or in the near future.

Introducing the P4T/RP4T Why might my customer need one…? Thermal-transfer printing allows for the production of long lasting and highly durable printed output for use in extreme weather conditions and temperatures. Mobile RFID removes the fixed constraints of RFID technology, allowing for the technology to be used in outdoor environments where tagging is still required.

P4T/RP4T Features Integrated Shoulder Strap Loops ‘Peel and Present’ slot

P4T/RP4T Features Latch releases (Media Bay and Cartridge Bay) Smart Ribbon Cartridge RFID encoder Media bay (with variable media guides)

Media bay latch release P4T/RP4T Features USB and Serial ports Media bay latch release

P4T/RP4T Features Ruggedised control panel Menu navigation buttons Power On/Off Feed Large, customisable LCD

P4T/RP4T Features Vehicle charger contact cover Fanfold slot (Optional) Smart battery

P4T/RP4T Specification Standard Spec (all models): Thermal-transfer or direct thermal printing (defaults to DT if no ribbon detected) 32-bit Processor 8MB Flash/16MB SRAM memory 4100mAH Li-Ion Battery USB 2.0 Connection Serial Cable Connection Daylight readable LCD with low level illumination for poor lighting conditions Smart battery management (See later detail) 1.52m (5’) drop spec (multiple) CPCL, ZPL, EPL and XML support. (Note ZPL required for RFID support) 38.1mm (1.5”) per second throughput in TT mode, 76.2mm (3”) per second throughput in DT mode IP 14-rated (increases to IP 54 with environmental case)

P4T/RP4T Specification Optional features: Fanfold support (no charge) Bluetooth 2.0 802.11b/g WiFi RFID – passive EPC Class 1 Gen 2 (standard on RF4T*) Height: 218.4mm Width: 177.8mm Depth: 76.2mm Weight: 1.32Kg (2.9lbs) *Note: P4T can be returned to Zebra for RFID upgrade to RP4T spec Weight and Ergonomics:

P4T/RP4T Specification RP4T RFID Specification: Fully integrated ThingMagic® UHF RFID Reader/Encoder Supports passive EPC Class 1 Gen 2 protocol/ISO 18000-6C RFID ZPL commands allow ease of RFID set up and flexibility Variable RFID read and write power settings to support a wide variety of inlays: Alien Squiggle Omron Wave Raflatac Onetenna Avery Runway RFID counters keep track of good and bad labels Verification & voiding of inlays to prevent usage of bad labels Interoperable with a wide variety of Gen 2 labels and tags Supports extended memory features of Gen 2 inlays

Application Targets P4T – Thermal-transfer mobile: Retail: Outdoor product labelling (Garden Centres) Outdoor wholesale labelling (Builders Merchants) Utilities: Outdoor asset management Telecoms Outdoor asset management Agriculture Livestock management Government: Military ordinance and asset tagging/tracking Law enforcement: Crime scene evidence tagging/tracking Mfg & logistics: High value goods tagging/tracking RP4T – Thermal-transfer UHF RFID Mobile:

Questions Any questions or concerns, please contact Matt Parker (mparker@zebra.com)