SATELLITE MIGRATION PROJECT Contractor Orientation

SATELLITE FREQUENCY ViStar Press “menu”, select “system configuration” and press “ok”. Enter 4-digit “access code”, default is “1234”.

SATELLITE FREQUENCY ViStar Select “factory default” and press “ok”. Enter 4-digit “access code”, default is “1234”.

SATELLITE FREQUENCY ViStar A prompt will appear, “do you want to reset receiver?”, press “ok”. The “welcome” prompt will appear, press “ok”.

SATELLITE FREQUENCY ViStar The “LNB configuration” window will appear, press “ok”. The “Add channels” window will appear, enter the following parameters: Frequency - 12390000 Symbol Rate - 25600 Polarization - 14V Search Type - Network

SATELLITE FREQUENCY ViStar Press “ok” to search channels. The message “Searching in process, please wait” will appear. After search is completed, press “ok” to finish. To add another frequency, repeat steps 8-9 but enter the frequency “12430000” in step 8 under “TP2”.

SATELLITE FREQUENCY ViStar Repeat steps 8-9 but enter the frequency “12470000” in step 8 under “TP3”. Press “exit” to finish.

Subscriber/Representative Name & Signature FORMS & FORMATS JOB ORDER FORM Control No.:   Installer Name : Dealer : Subscriber Name : Subscriber Contact No. : Address : Items Replaced : Low Noise Block (LNB) Converter Others : Antenna Dish Bracket RG-6 Cable I certify that that the Out-Door-Unit (ODU) has been re-aligned/relocated and my unit is working properly. Subscriber/Representative Name & Signature