2. ATP INITIALIZATION PLACE ATP SWITCH TO “1” OR “NORMAL” POSITION A CHECK IF DIAGNOSTIC PANEL IS ON PUT THE HAND CONTROLLER SWITCH TO “ON” POSITION X NO YES LINE CONTACTOR CLICKED WHEN “WAIT” INDICATION APPEARS ON THE DISPLAY PANEL, HOLD THE HAND CONTROLLER SWITCH TO “MODE 1” X NO YES START-UP TEST CODES (400-405) ARE DISPLAYED WAIT UNTIL ALL TESTS PASSED X NO YES WHEN ATP TEST SYMBOL IS DISPLAYED AND THE ALARM SOUNDS, PRESS “TEST” BUTTON ONCE A ATP DISPLAY BECOMES DARK, ALARM SOUND INCREASES GRADUALLY UNTIL IT TURNS OFF TURN OFF TRAIN AND WAIT FOR 15 SECONDS “TEST” BUTTON PRESSED WITHIN 4 SECONDS PRESS “TEST” BUTTON AGAIN NO X YES “START 15” IS DISPLAYED ON THE ATP SCREEN TRAIN IS READY FOR DEPARTURE