“DESIGN AND FABRICATION OF ROTARY SHEARING MACHINE” A PROJECT REPORT ON “DESIGN AND FABRICATION OF ROTARY SHEARING MACHINE” SUBMITTED BY SHIVAM MISHRA NAVEEN MISHRA ANOOP KUMAR YADAV AWADHESH PRATAP SINGH 14BTMECH149 14BTMECH090 14BTMECH101 14BTMECH095 under the guidance of Dr. L P SINGH (Assistant Professor) Department of Mechanical Engineering

OBJECTIVEs To Design and Fabricate a Rotary Shearing Machine. To test the fabricated Rotary Shearing Machine. To perform multiple operations. 2/20/2018 GROUP NO. 6

INTRODUCTION Shearing is defined as operation which is used to cut sheets of metal into smaller pieces without forming chips. Cutting can be easily performed with accuracy. The machine is manually operated and can easily cut the long sheets. 2/20/2018 GROUP NO. 6

ASPECTS OF PROJECT Shaft Bed Rotary Cutter Manually Operated Handle Dies Housing Bearings Nuts & Bolts Frames 2/20/2018 GROUP NO. 6

advantages It is manually operated and not require electric power. Multiple operation can be performed. Less maintenance cost. It can be easily moved from one place to another. 2/20/2018 GROUP NO. 6

disadvantages It cannot cut material more than 5 mm thickness. Operator is required to perform operations. Time loss on changing dies. 2/20/2018 GROUP NO. 6

THANK U 2/20/2018 GROUP NO. 6