HBS Series Closed Loop Stepper System

Fast Response Servo System Gain Tuning

Fast Response Synchronizes with Command Pulses Providing Fast Positional Zero-Speed Stability Continuous operation during rapid short-stroke movement

No Gain Tuning Eliminate the need of tedious gain tuning Suited for Low Stiffness Loads without Gearbox

No Hunting HBS Series Servo Complete Stop Hunting HBS Series Servo Complete stand-still motion is possible due to the availability of holding torque, a typical characteristic of stepper motor.

Closed-Loop Traditional Stepper Smoothing & Accuracy Torque Heating

No Loss Closed-loop system avoid a potential loss of synchronism between command steps and the actual steps

Smoothing & Accuracy DSP( Digital Signal Processor) performs vector control and filtering, producing a smooth rotational control with minimum ripples

Torque & Heating Higher efficiency from low heat and high torque generation is achieved by controlling the current flow to motor according to motor load.

Application Short-Stroke Movement Null Hunt High torque performance in the low speed range delivers shorter positioning time for short stroke at high hit rate applications. Null Hunt The unique characteristics of stepper motors and locks itself into the desired target position, eliminating Null Hunt. This feature is especially useful in applications such as nanotech manufacturing, semiconductor fabrication, vi-sion systems and inkjet printing in which system oscillation and vibration could be a problem.

Competitive In The Market FASTECH Performance FESTO CMMS-ST 30% Cost SANYO PB

Thank You!