Mode Construction during Validation2 WLTP-DTP-LabProcICE-104 Proposal on Mode Construction from the OICA Representatives in the VTF for Validation Phase 2 30.9.2011 W. Coleman/K. Kolesa

Mode Construction during Validation2 (proposal from DTP7) preconditioning L/M test LOW 589s MIDDLE 433s LOW 589s MIDDLE 433s LOW 589s MIDDLE 433s overnight soak Intermediate or complete hot sample1 sample2 sample3 sample4 independent test HIGH 455s Ex-HIGH 323s No soak preconditioning (option) sample A (option) sample B H/Ex-H test sample1 sample2 (option) sample A Range test Range L/M LOW 589s MIDDLE 433s Range H/Ex-H HIGH 455s Ex-HIGH 323s Ki determination (regeneration system) series test series test L/M test H/Ex-H test LOW 589s MIDDLE 433s HIGH 455s Ex-HIGH 323s L/M test H/Ex-H test Loading cycle

Options to be tested in Validation Phase 2 Mode Construction for Validation2 (alternative proposal from OICA-VTF) preconditioning HIGH 455s Ex-HIGH 323s LOW 589s MIDDLE 433s HIGH 455s Ex-HIGH 323s LOW 589s Soak 6 -36 h 600 sec soak Options to be tested in Validation Phase 2 sample1 sample2 sample3 sample preconditioning LOW 589s MIDDLE 433s HIGH 455s Ex-HIGH 323s LOW 589s MIDDLE 433s HIGH 455s Ex-HIGH 323s Soak 6 -36 h sample1 sample2 sample3 Range test City Range LOW 589s MIDDLE 433s AE Range LOW 589s MIDDLE 433s HIGH 455s Ex-HIGH 323s Ki determination (regeneration system) subsequent test subsequent test L/M test H/Ex-H LOW 589s HIGH 455s MIDDLE 433s Ex-HIGH 323s L/M test H/Ex-H loading cycle