ARS2019XXX: Title ( Arial 72, Bold ) U.G.C.R. Madhushani, A.B. Lakshani, and B.M.L.A. Basnayake Introduction: Objectives: Instructions: Use this template to prepare the poster. Please don’t change the cage style, footer note, logos, title styles and authors name styles. The size of the poster must be 2’ x 4’ (feet) oriented in the “portrait" position. In order to fit the poster board, your poster should not exceed the recommended size. Title lettering should be Cambria, 72 point, Bold followed by ARS code of the paper. Authors names should be Cambria, 40 point, Bold. Section headings (Introduction, Methodology, Results and Discussion, Conclusion, Acknowledgements, etc) should be 48 point, Arial (Bold) The body lettering should not be less than a 24-point type to make it readable from a five feet away. Reference (if any) shall be done using Harvard Referencing. Do not add long list of references as space of your poster is limited. Cite and reference only important sources. Make your poster attractive for readers. Your poster should highlight and summarize the main points. Present only enough data to support your conclusions. Graphs, tables and pictures should be simple and easy to read. Figures and graphs should be in high resolution. Submit your poster in both .pptx and .pdf format on or before 3rd May 2019 to the email address ars2019foeuor@gmail.com. The organizers will provide the printed poster on the symposium day. Your poster should be mounted before the beginning of the first poster session and removed by the end of the symposium. Do not use glue, pins or staples. The organizers will provide suitable fixing materials, and onsite assistance will be available to help you to display your poster. Annual Research Symposium ARS2019 “Research for Achieving Excellence in Engineering” Faculty of Engineering, University of Ruhuna.