Champion RotorChamp 5 - 20 HP

New Gardner Denver Product Plan In 2005, Gardner Denver acquired Bottarini S.p.A. located in Milan, Italy Founded in 1952, they are a manufacturer/assembler of reciprocating and rotary screw compressors They have an extensive line of lubricated rotary screws Package airends are the same reliable Enduro airends as used in many of the current Gardner Denver products

Why Bottarini? Proven compressors from a “Packaging Expert” A reliable product at a lower cost

Scope of Products 5 to 20 HP Air-cooled only - oilcooler and after-cooler Compact size - fully enclosed All V-belt driven units All base mounted Microprocessor “Easy to Use” controllers Aeon 4000

Product Features Vertical Draft Coolers Discharge Removable Panels for Easy Access to Service Points IP 54 rated enclosure - dust protection and protection from splashing water Electrical Wiring Inlet Suction Air Into Package Main Power Switch Small-Compact Footprint

The RotorChamp Airend - Proven the World Over!

Product Features Dependable Enduro Airends! V-belt drive with integral belt tensioning devices All units will have an IP 54 rated enclosure - dust protected and protection from splashing water Pressures available - 100, 125, 150, 175 PSIG

Product Features TEFC motors are standard - a tropical motor with an IP 55 rating/Class F Insulation Voltages - all models: 200 Volt, 230 Volt, 460 Volt and 575 Volt - all 3 phase Also 230 Volt - 1 phase 5 and 7.5 HP RotorLub 4000

Product Features Spin On Lubricant Separator Inlet Valve and Filter Adjustable Belt Tensioning Device Spin on 30 Micron Full Flow Oil Filter Dependable Enduro Airend Lubricant Reservoir with AEON 4000 RotorLub 4000 TEFC Motor with Pulley Lubricant Level Sight Tube

Competitive Sound Levels 5 HP - 69 dBA 7.5 HP - 70 dBA 10 HP - 71 dBA 15 HP - 74 dBA 20 HP - 74 dBA Acoustical Foam

Product Features Base mounted will be standard with the moisture separator/trap shipped loose Optional receivers available: 80 gallon for the 5 - 10 HP 120 gallon for the 15 and 20 HP An Auto Receiver Condensate Drain is available Vertical Draft Coolers

Product Features Starters will be Direct Only - “full voltage-across the line” on the 5 - 20 HP models No other starter options will be offered An optional Auto Receiver Condensate Drain will be available

Product Features Microprocessor control panels with digital display as well as a pressure gauge The compressor will be regulated as a start/load/no-load/timer off control

On/Off, Alarm LED, Rotation LED, Power LED, Temperature LED, Hours LED Control Panel On/Off, Alarm LED, Rotation LED, Power LED, Temperature LED, Hours LED Will provide shutdown alarms and warnings Will provide factory programmed maintenance advisory alerts on the LED display Off Button and E-Stop

Shutdown Alarms - “A” Shutdown Alarms Displays A 01 Shutdown for high oil temperature A 03 Shutdown for high motor amperage A 04 Reverse rotation alarm, phase loss or voltage drop A 07 Temperature probe failure - low ambient <- 50°F alarm a 01 Pre-alarm - inlet filter change warning a 02 Warning: compressor is waiting to start after a stop a 03 Pre-alarm: a temperature of 215°F has been reached

Maintenance Warnings - “S” Maintenance Warning Displays S. 01 500 hours before oil change S. 02 500 hours before inlet filter change S. 03 500 hours before oil filter change S. 04 500 hours before oil separator change S. 06 250 hours before general maintenance

Product Features Compressor Discharge Heavy Duty 8 Micron Inlet Filter 30 Micron Spin on Oil Filter Oil Reservoir and Site Tube

Product Benefits Summary Dependable Enduro airends Tank mounted options Microprocessor controls Competitive noise levels Lower price

Execution Process Phase One: 5 through 20 HP 10 through 20 HP are in stock and ready to ship 5 and 7.5 HP shortly thereafter Marketing materials are available Planned overlap with current products Over 200 units for the 10 - 20 HP group are available now! Orders have been placed for the 5 and 7.5 HP units - due to arrive in September MOST IMPORTANTLY - List prices are 5% - 10% below current levels

Other Issues Future product plans include an “Air System” that would include the air compressor, a refrigerated dryer and an air receiver Configuration to be determined - horizontal tank mounted or base mounted with a vertical receiver Product Overlap There will be a well metered “phase out” process of existing products which will prevent product availability gaps