3Y6P GASOLINE CHAIN SAWS Quick start 2018

Supposed your saw is assembled: guide bar and chain are installed and adjusted Release a chain (if it is blocked): pull back a safety handle confidently till slight click ((white color detent should be moved down as on photo)):

Add some machine oil (for example the same as you use in your car) into a small tank under this cover (oil is necessary to lubricate a chain):

Mix gasoline (petrol) with machine oil in proportion 50:1 (gasoline:oil) using this bottle (included). Shake it a little bit:

Add gas-oil mixture into a tank under this cover:

Turn on an engine switch:

Pull out a baffler:

If necessary, give a pump for gas-oil mixture by pressing this “button” several times until you can see the mixture inside:

Start an engine by quick pulling out of this handle (maybe you need to do this movement 5-7 times till engine will start):

If the engine does not start with pulled out baffler, push it back in and try to start an engine again, with pushed in baffler (again, maybe you need to do the movement by this handle 5-7 times till engine will start) ATTENTION: when an engine started, a chain may begin to move! KEEP any parts of your body and any items ASIDE of chain during starting a saw!!!

Once an engine started - push a baffler back in (if not yet):

Now you can use a machine… Push operating button with the sequence (upper first, lower second):

To turn off an engine just switch off an engine switch:

apx1: If you feel that a chain is not enough tense, you can adjust it by this screw (in a center of photo): Some models have this screw (in white or black color) on the other (“outer”) side of guide bar

apx2: a chain should be installed on guide bar in this direction:

apx3: you can block a chain not only during operating time: move safety handle towards the chain and guide bar till a click (white color detent should be fixed in a position as on photo):

Under this cover you can find air filter and ignition spark plug (open this cover to replace (if necessary) these 2 parts):

You can also refer to this video for details (sorry, Russian only (but understandable visually)): https://www.facebook.com/KraftoolHK/videos/289815091530883/

Enjoy your 3Y6P saw for several years! Contact us if you have any questions: cs@kraftool.hk 3184-0368 (English) 3184-0265 (Chinese) Whatsapp: +85262079984 (Fedor; English)