While the audience is gathering. During breaks etc While the audience is gathering. During breaks etc. Simple messages can be added in bold and white letters on the dark blue sea, eg. ”Welcome!”, ”Back at 15.15”

HOW-TO HOW-TO Use port numbers and domain name for STM services This HOW-TO explains how to establish the requirements for the firewall setting in front of a STM Service, and using domain name in relation to the domain set in certificates.

Recommended Port Usage for STM Service Internet URL=https://ip [443] Service :443 Service :8000-8100 Service :8443 Service Incoming port interval: 443 (default SSL) 8000-8100 8443 :9000 Service

Recommended Port Usage for STM Service Internet URL=https://ip [443] Service :443 Service :8000-8100 Service :8443 Service Outgoing port interval: 443 (default SSL) 8000-8100 8443 :9000 Service

Domain name There are interoperability issues using IP-address for service, and therefore the requirement in STM is that the domain shall be properly registered and registered in DNS. The server certificate contains field for the domain where the service is located. This must be a domain name and not an IP address. CN=Common Name SAN=Subject Alternative Name (RFC 2818) Example: The URL to the service is https://smavis.stmvalidation.eu/stmvalidation The CN=smavis.stmvalidation.eu Ref https://support.dnsimple.com/articles/what-is-common-name/#common-name-vs-subject-alternative-name

At the end – you could add text in black like ”Thank You !”