Purpose Indication of WUR Packets

Slides:



Advertisements
Similar presentations
Doc.: IEEE /0618r0 Submission Listen interval for sensor devices May 2012 Slide 1 Date: Authors: Jinsoo Choi, LG Electronics.
Advertisements

Multi-STA BA Design Date: Authors: March 2016 Month Year
2200 Mission College Blvd., Santa Clara, CA 95054, USA
AP Power Saving Date: Authors: May 2017 Month Year
WUR-based Broadcast Reference Signal
Proposed SFD Text for ai Link Setup Procedure
On AP Power Saving Usage Model
Purpose Indication of WUR Packets
Further Consideration on Smart Scanning Usage Model
WUR Synchronization Date: Authors: September 2017
Triggering the Broadcast Probe Response
Follow-Up on WUR Discovery Frame and Discovery Channel
WUR MAC issues follow-up
Considerations for WUR Response
Follow-Up on WUR Discovery Frame and Discovery Channel
Advertising WUR Discovery Frame Related Info for Fast Scanning
Wake Up Frame to Indicate Group Addressed Frames Transmission
Advertising WUR Discovery Frame Related Info for Fast Scanning
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
Consideration on WUR frame for Fast Scanning
Consideration on WUR frame for Fast Scanning
Advertising WUR Discovery Frame Related Info for Fast Scanning
Synchronization with Low Power Antenna
Synchronization with Low Power Antenna
Consideration on WUR frame for Fast Scanning
WUR Use Cases and Requirements
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
WUR MAC issues follow-up
STA wake up using BSS Parameter Update Counter
Group Delay for Group Addressed Wake Up Frames
WUR MAC and Wakeup Frame
WUR MAC and Wakeup Frame
Listen to Probe Request from other STAs
WUR MAC and Wakeup Frame
Power saving operation for WUR STAs in duty cycle mode
Follow-Up on WUR Discovery Frame and Discovery Channel
CR for CID 1105 Date: Authors: January 2019 Month Year
2200 Mission College Blvd., Santa Clara, CA 95054, USA
Low Latency and Low Medium Utilization
WUR Use Cases and Requirements
WUR MAC and Wakeup Frame
2200 Mission College Blvd., Santa Clara, CA 95054, USA
AP re-discovery by WUR STA
Power saving operation for WUR STAs in duty cycle mode
Advertising WUR Discovery Frame Related Info for Fast Scanning
FDMA MAC Support Date: Authors: Liwen Chu Marvell
Considerations for WUR Response
BSS parameters update notification
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
Power Efficiency for Individually Addressed Frames Reception
Advertising WUR Discovery Frame Related Info for Fast Scanning
WUR Security Proposal Date: Authors: September 2017
WUR Security Proposal Date: Authors: September 2017
Power saving operation for WUR STAs in duty cycle mode
WUR MAC and Wakeup Frame
Power Efficient WUR AP Discovery
STA wake up using BSS Parameter Update Counter
On AP Power Saving Usage Model
Power Efficiency for Individually Addressed Frames Reception
Considerations on post wake-up sequences
Power Efficient WUR AP Discovery - A Follow Up
WUR-Only Discovery Mode for WUR STAs
TXOP Truncation Enhancement
Power save state transition
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
Discussion on Functional Requirements
Purpose Indication of WUR Packets
19, Yangjae-daero 11gil, Seocho-gu, Seoul , Korea
Roaming mechanism for duty cycle mode
Presentation transcript:

Purpose Indication of WUR Packets Month Year doc.: IEEE 802.11-yy/0387r0 March 2017 Purpose Indication of WUR Packets Date: 2017-03-12 Authors: Xiaofei Wang (InterDigital) John Doe, Some Company

May 2015 doc.: IEEE 802.11-15/0387r0 March 2017 Abstract In this contribution, we discuss the need and benefits for WUR packets to indicate their purposes. Xiaofei Wang (InterDigital) Xiaofei Wang (InterDigital)

May 2015 doc.: IEEE 802.11-15/0387r0 Introduction March 2017 Many different wake up scenarios have been discussed in WUR SG and TGba using a Wake Up Packet (WUP) E.g., an AP may use a WUP to wake up one or more STAs for the following purposes: Synchronization [1][3] Request STAs to listen to beacon [2] Data transmission: DL/UL [1][3] and/or SU/MU [1][2] E.g., a STA may use a WUP to wake up an AP for the following purposes: Discovery and association [4] UL Data Transmission [5] STA behaviors and WUP contents are expected to be different in many of the scenarios described above depending on the purpose of the transmitted WUP. Xiaofei Wang (InterDigital) Xiaofei Wang (InterDigital)

Wake up scenario analysis (1) May 2015 doc.: IEEE 802.11-15/0387r0 Wake up scenario analysis (1) March 2017 Scenario 1: An AP sends a WUP to one or more STAs for synchronization: Example WUP content: TSF timer Example receiving STA behavior: synchronize, no need to turn on Primary Connectivity Radio (PCR) Scenario 2: An AP sends a WUP to STAs to request the STAs to receive the beacon: Example WUP content: beacon TBTT, maybe reason Example receiving STA behavior: turn on PCR and receive beacon Scenario 3: An AP sends a WUP to one or more STAs for SU/MU DL/UL data transmission: Example WUP content: DL/UL indication, TOMI/ROMI, SU/MU indications, resource allocation for STAs Xiaofei Wang (InterDigital) Xiaofei Wang (InterDigital)

Wake up scenario analysis (2) May 2015 doc.: IEEE 802.11-15/0387r0 Wake up scenario analysis (2) March 2017 Scenario 3: An AP sends a WUP to one or more STAs for SU DL/UL data transmission: Example receiving STA behavior: Inform AP of waking up/Turn on PCR Adjust TOMI/ROMI Tx/Rx accordingly Scenario 4: A STA may send a WUP to an AP for discovery and association: Example WUP content: SSID/BSSID requested, Service Requested Example receiving AP behavior: send beacon/broadcast probe response to facilitate discovery/association Xiaofei Wang (InterDigital) Xiaofei Wang (InterDigital)

Wake up scenario analysis (3) May 2015 doc.: IEEE 802.11-15/0387r0 Wake up scenario analysis (3) March 2017 Scenario 5: A STA may send a WUP to an AP for UL data transmission: Example WUP content: DL/UL request indication, TOMI/ROMI indication, BU size indication Example receiving AP behavior: Inform STA of waking up/Turn on PCR Adjust TOMI/ROMI Rx accordingly Xiaofei Wang (InterDigital) Xiaofei Wang (InterDigital)

WUP Purpose Indication May 2015 doc.: IEEE 802.11-15/0387r0 WUP Purpose Indication March 2017 If the purpose of a WUP is indicated in the WUP: It will help receiving STAs to optimize operations following the receptions of the WUP It can provide indication of the content of the WUP as well Can WUP purpose be indicated using other fields, e.g., the Type field? The content of a packet is typically indicated by the Type field Purposes such as synchronization, request STAs to receive beacons, wake up STAs for UL/DL SU/MU packets are typically not covered by the Type field Can the purpose of wake up be indicated through the PCR Some of the purposes such as UL/DL, SU/MU data transmission may be indicated using PCR; Likely requires additional overhead (packet exchanges) Synchronization may not require STAs to turn on their PCRs Xiaofei Wang (InterDigital) Xiaofei Wang (InterDigital)

May 2015 doc.: IEEE 802.11-15/0387r0 March 2017 Summary STA behaviors and WUP contents are expected to be very different in many wake up scenarios depending on the purpose of the transmitted WUP. Allowing the WUP to indicate the wake up purpose may better prepare receiving STAs for optimized operations Some of the WUP purposes may include: Synchronization Request STAs to receive beacon UL/DL SU/MU data transmissions AP discovery and association Xiaofei Wang (InterDigital) Xiaofei Wang (InterDigital)

References [1] 11-17/0054r1, WUR MAC Issues, Jan. 2017 March 2017 References [1] 11-17/0054r1, WUR MAC Issues, Jan. 2017 [2] 11-17/0124r1, WUR MAC and Wakeup Frame, Jan. 2017 [3] 11-17/0034r0, WUR Use Cases and Requirements, Jan. 2017 [4] 11-16/1400r0, Power Efficient WUR AP Discovery, Nov. 2016 [5] 11-16/0029r4, WUR Usage Model Document, Jan. 2017 Xiaofei Wang (InterDigital)

May 2015 doc.: IEEE 802.11-15/0387r0 March 2017 Straw Poll Do you agree that a wake up packet should include a purpose field to indicate the purpose of the wake up operation? Xiaofei Wang (InterDigital) Xiaofei Wang (InterDigital)