Pumps & tURBINES ME 170: Fundamentals of Mechanical Engineering

Slides:



Advertisements
Similar presentations
FUNDAMENTALS OF FLUID MECHANICS
Advertisements

TURBINES Definition. ‘TURBO MACHINE’ is defined as a device that extracts energy or imparts energy to a continuously flowing fluid by the dynamic action.
PELTON TURBINE Pelton Turbine is a Tangential Flow Impulse Turbine.
Introduction to Propulsion
Compressors CM4120 Julie King.
TURBINES.
Air Compressors.
TURBINES.
Irfan Ahmed Operations Department
Water Pumps.
AE 1350 Lecture Notes #13.
place where air is expanded and accelerated rearward by the turbine, creating energy needed for reaction of the aircraft.
BASIC MECHANICAL ENGINEERING
Components of Centrifugal pumps
5. MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES
Turbines RAKESH V. ADAKANE DEPARTMENT OF MECHANICAL ENGINEERING
Hydro-Electric Power Station Lecture No: 4. “”A generating station which utilizes the potential energy of water at a high level for the generation of.
Presentation prepared by: Nimesh Gajjar
Positive Displacement Pumps.
CHAPTER 5: Mass and Energy Analysis of Control Volumes
Basic Mechanical Engineering-Hydraulic Turbines
PRESENTED BY : N.SRIKAUSIGARAMAN
Parul Institute of Engineering & Technology Subject Code : Name Of Subject : Fluid Power Engineering Name of Unit : Pumps Topic : Reciprocating.
Hydraulic machinery Turbine is a device that extracts energy from a fluid (converts the energy held by the fluid to mechanical energy) Pumps are devices.
Turbojet engine (Rocket)‏
Types of fluid flow Steady or unsteady Uniform or non-uniform Laminar and turbulent Compressible or incompressible Viscous or non-viscous Rotational or.
L.J.INSTITUTE OF ENGINEERING AND TECHNOLOGY compressors Shah Aadishkumar Aileshbhai (enrollment no ) (div A roll no. 55) Guided by Mr.hemangsir.
Centrifugal Compressor
Prepare by :- Shivkumar Panjabi 1.  Introduction.  Types of compressors.  Positive displacement compressors.  Dynamic compressors.  Reciprocating.
Prepared By Rohit G. Sorte M.Tech
C.k.pithawala college of engg. & Tech. surat Branch : Mechanical Subject : Fluid Power Engineering Topic : Screw Compressors Group No. : P11.
WORK Work = Force x Distance POWER power = work done ÷ time taken ENERGY 1-POTENTIAL ENERGY (Potential Energy = Force x Distance ) 2-KINETIC ENERGY Energy.
Active Learning Assignment, FFO, BE- Sem 3rd – 2nd year
Fluid Mechanics for Chemical Engineers Arif Hussain (Lecturer)
Nishkarsh Srivastava ( )
Prof. S. M. Harle Dept of Civil Engg PRMCEAM
HYDRAULIC TURBINES By:- Sagar Mewada
Hydraulic Turbines  EN:  TAILOR VIPUL.B. SUBMITED TO :- B.J.SHETH.
I PREPARED BY: DR. BRIJESH GANGIL ASST. PROFESSOR HNBGU.
TOPIC- TURBINES Name of students -En. N- 1. MAHESURIA OMPRAKASH ISHVARLAL | Website for Students | VTU NOTES | QUESTION PAPERS.
FLUID FLOW FOR CHEMICAL ENGINEERING Dr Mohd Azmier Ahmad Tel: +60 (4) EKC 212 CHAPTER 8 (Part 3) TRANSPORTATION SYSTEM.
Prepared by: Kamil Bin Sahidin
Gas Turbine Theory and Construction
RECIPROCATING MACHINES
PNEUMATICS Chapter 3 ROTARY COMPRESSORS
Chapter: 06 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES.
BASICS OF MECHANICAL ENGINEERING
HYDRAULIC TURBINES AND ITS CLASSIFICATION
Pelton Wheel is an example of such turbine.
Program : Mechanical Engineering Course: Fluid Mechanics & Machinery CO-Select various types of turbine under specified condition.
HYDRAULIC TURBINES.
BHAGWANT UNIVERSITY AJMER
STEAM TURBINES Steam turbine is a device which is used to convert kinetic energy of steam into mechanical energy. In this, enthalpy of steam is first converted.
SNS COLLEGE OF ENGINEERING Coimbatore-107 Subject: Thermal Engineering
Fluid Mechanics and Machinery Hydraulic Turbines
Applied Thermal Engineering
HYDRAULIC TURBINES.
PELTON WHEEL AND FRANCIS TURBINE
TURBOMACHINES Chapter 1 INTRODUCTION
Reaction Turbines.
A course in turbomachinery……………lecturer: Dr.Naseer Al-Janabi
Basic Mechanical Engineering-Hydraulic Turbines
The other main type of energy-producing hydroturbine is the
The thermodynamic Variations
What is a Turbine ? A Turbine is a device which converts the heat energy of steam into the kinetic energy & then to rotational energy. The Motive Power.
A course in Turbomachinery Lecturer: Dr.Naseer Al-Janabi
Classification of air compressors. What are compressors? Compressors are mechanical devices that compresses gases. It is widely used in industries and.
TURBINE AND PUMP Eg: steam turbine, gas turbine, hydraulic turbine
Hydraulic Turbines Presented By: Vinod Dahiya
Pumps Because of the wide variety of requirements, many different types are in use including centrifugal, piston, gear, screw, and peristaltic pumps. The.
Presentation transcript:

Pumps & tURBINES ME 170: Fundamentals of Mechanical Engineering Bangladesh University of Engineering and Technology (BUET) ME 170: Fundamentals of Mechanical Engineering (Model Lab) Lecture 4 Pumps & tURBINES Md. Muntasir Alam Lecturer Department of Mechanical Engineering, BUET, Dhaka-1000 Email address: muntasiralam@me.buet.ac.bd , muntasir.shubro91@gmail.com © Md. Muntasir Alam (BUET)

Bangladesh University of Engineering and Technology (BUET) Hydraulic Energy Hydraulic energy is what is produced by the water which is stored in reservoirs and lakes at a high altitude (so that it has gravitational potential energy). If at a given moment it falls to a lower level, this energy is transformed into kinetic energy and afterwards into electrical energy in the hydroelectric plant. Kinetic Energy Pressure Energy Potential Energy

Bangladesh University of Engineering and Technology (BUET) Turbo Machinery Turbo machines are dynamic fluid machines that either extract energy from a fluid (as in turbines) or add energy to fluid (as in pumps) as a result of dynamic interactions between the device and fluid.

Classification of Turbo Machines Bangladesh University of Engineering and Technology (BUET) Classification of Turbo Machines

Based on energy addition/extraction: Bangladesh University of Engineering and Technology (BUET) Classification of Turbo Machines Based on energy addition/extraction: 1. Absorb energy to increase fluid pressure e.g. pumps, fans, compressors 2. Producing energy by expanding flow to lower pressures. e.g. turbines Turbine Pump Compressor

Classification of Turbo Machines Bangladesh University of Engineering and Technology (BUET) Classification of Turbo Machines Based on direction of fluid flow: 1. Axial Flow: E.g. Kaplan Turbine 2. Radial Flow: E.g. Francis turbine old version 3. Mixed Flow: E.g. Francis Turbine

Based on type of fluid handled: 1. Incompressible fluid: E.g. Pumps Bangladesh University of Engineering and Technology (BUET) Classification of Turbo Machines Based on type of fluid handled: 1. Incompressible fluid: E.g. Pumps 2. Compressible fluid: E.g. Compressors Based on no. of stages: 1. Single stage – single row of blades/impellers 2. Multi stage – multiple row of blades/impellers

Bangladesh University of Engineering and Technology (BUET) Pumps

Bangladesh University of Engineering and Technology (BUET) Pumps It is a mechanical device which transfers energy from an external source to the liquid flowing through a conduit. MECHANICAL ENERGY  HYDRAULIC ENERGY

Bangladesh University of Engineering and Technology (BUET) Pump Classification

Positive Displacement Pumps Bangladesh University of Engineering and Technology (BUET) Positive Displacement Pumps A Positive Displacement Pump makes a fluid move by trapping a fixed amount and forcing (displacing) that trapped volume into the discharge pipe. The volume is constant through each cycle of operation. Rotary type: Gear, screw, lobe, vane pumps Reciprocating type: Piston, plunger, diaphragm pumps

Bangladesh University of Engineering and Technology (BUET) Reciprocating Pump A Reciprocating pump is a positive displacement pump which is driven by power from an external source and consists of a cylinder in which a piston is moved forwards and backwards. The movement of the piston creates alternately a vacuum pressure and positive pressure by means of which the water is raised.

Bangladesh University of Engineering and Technology (BUET) Gear Pump A Gear Pump uses the meshing of gears to pump fluid by displacement. Gear pumps are widely used for hydraulic fluid power applications and in chemical installations to pump high viscosity fluids. As the gears rotate they separate on the intake side of the pump, creating a void and suction which is filled by fluid. The fluid is carried by the gears to the discharge side of the pump, where the meshing of the gears displaces the fluid. External Gear Pump Internal Gear Pump

Bangladesh University of Engineering and Technology (BUET) Lobe Pump Lobe Pumps are used in a variety of industries including pulp and paper, chemical, food, beverage, pharmaceutical and biotechnology. Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox.

Bangladesh University of Engineering and Technology (BUET) Centrifugal Pump A Centrifugal Pump is a machine which converts mechanical energy into kinetic and pressure energy through centrifugal force. A centrifugal pump consists of two main parts: a rotating element, including an impeller and a shaft. a stationary element made up of a casing, stuffing box and bearings. Impellers

Centrifugal Pump–Why Priming? Bangladesh University of Engineering and Technology (BUET) Centrifugal Pump–Why Priming? Total head, H = Suction head, hs + Delivery head, hd Priming is done in pumps to remove any air present in the suction side. For removing air water is filled in suction pipe, casing and into a portion of delivery pipe. As the head developed by the pump is directly proportional to the density of fluid to be handled, so with the presence of air it is not possible to create pressure. So, if impeller runs in air, very low pressure will be developed due to low density of air. As a result, no liquid will be lifted by the pump.

Bangladesh University of Engineering and Technology (BUET) Turbines

Bangladesh University of Engineering and Technology (BUET) Turbine A Turbine is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work. has at least one set of moving blades attached to a shaft called the rotor assembly.

Turbine Classification Bangladesh University of Engineering and Technology (BUET) Turbine Classification

Bangladesh University of Engineering and Technology (BUET) Impulse Turbine An Impulse turbine is a turbine which is driven by the impulse of water. In case of an impulse turbine water from the dam flows through a pipeline. After passing a guide mechanism it comes out through a nozzle. All the energy of water is converted into kinetic energy. Water in the form of a jet from nozzle impinges on the buckets fixed to the outer periphery of a running wheel. After coming out of buckets water flows with a low velocity. The pressure of water both at entering and leaving the buckets is atmospheric.

Bangladesh University of Engineering and Technology (BUET) Reaction Turbine A Reaction turbine is a turbine into which water enters with high pressure and flows over curved blades. A part of pressure head is converted into kinetic energy and the remaining part remains as pressure head. The reaction pressure is responsible for the motion of the runner. The difference of pressure between inlet and outlet point is known as reaction pressure. The entire water passage remains totally enclosed.

Bangladesh University of Engineering and Technology (BUET) Pelton Wheel

Bangladesh University of Engineering and Technology (BUET) Pelton Wheel

Bangladesh University of Engineering and Technology (BUET) Pelton Wheel Nozzles direct forceful, high- speed streams of water against a rotary series of spoon-shaped buckets mounted on the rim of a wheel. The water jet's momentum is transferred to the wheel and thence to a turbine. Thus, impulse energy does work on the turbine. Used for high head, low flow rate.

Bangladesh University of Engineering and Technology (BUET) Francis Turbine

Bangladesh University of Engineering and Technology (BUET) Francis Turbine Francis turbine is an inward flow reaction turbine where the water under the pressure enters the runner from the guide vanes towards the centre in radial direction and discharges out of the runner axially. This turbine is used for medium head and medium flow rates.

Bangladesh University of Engineering and Technology (BUET) Kaplan Turbine

Bangladesh University of Engineering and Technology (BUET) Kaplan Turbine Kaplan turbine is an evolution of the Francis turbine. It is a propeller type water turbine which has adjustable blades. Since the radial distance from the axis at the inlet and outlet is same, the peripheral velocity is constant. This turbine is used for low heads and high flow rates.

Hydroelectric Power Plant Bangladesh University of Engineering and Technology (BUET) Hydroelectric Power Plant

Hydroelectric Power Plant Bangladesh University of Engineering and Technology (BUET) Hydroelectric Power Plant

Hydroelectric Power Plant- Components Bangladesh University of Engineering and Technology (BUET) Hydroelectric Power Plant- Components Headpond: a channel which leads water to the turbine. Reservoir: The place behind the dam where water is stored. Intake: The gates built on the inside of the dam. Water from reservoir is released and controlled through these gates. Dam: Dam develops a reservoir of the desired capacity and builds up a head for power generation. Penstock: carries the water flowing from reservoirs towards the power generation unit. Draft Tube: allows the turbine to be set above tailrace. Tailrace: a channel which carries water from the turbine.

Generation capacity = 230MW Reservoir size = 777 sq. km Bangladesh University of Engineering and Technology (BUET) Karnafuli Hydroelectric Power Plant Generation capacity = 230MW Reservoir size = 777 sq. km

Bangladesh University of Engineering and Technology (BUET) Gas Turbine A Gas turbine is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in between.

Bangladesh University of Engineering and Technology (BUET) Turbojet Turbojet is an airbreathing jet engine, usually used in aircraft. Consists of a gas turbine with a propelling nozzle. Compressed air from the compressor is heated by the fuel in the combustion chamber and then allowed to expand through the turbine. Turbine exhaust is then expanded in the propelling nozzle where it is accelerated to high speed to provide thrust.

Bangladesh University of Engineering and Technology (BUET) Turbojet

Bangladesh University of Engineering and Technology (BUET) Turbofan Turbofan is an airbreathing jet engine, widely used in aircraft propulsion. Turbo portion refers to a gas turbine engine which achieves mechanical energy from combustion. A ducted fan uses the mechanical energy from the gas turbine to accelerate air rearwards. In turbofan, some of the air bypasses the turbine. A turbofan can be thought of as a turbojet being used to drive a ducted fan, with both of those contributing to the thrust.

Bangladesh University of Engineering and Technology (BUET) Turbofan

Bangladesh University of Engineering and Technology (BUET) Turboprop Turboprop engine is a turbine engine that drives an aircraft propeller. In contrast to a turbojet, the engine’s exhaust gases do not contain enough energy to create significant thrust, since almost all of the engine’s power is used to drive the propeller. The propeller is coupled to the turbine thorough a reduction gear that converts the high RPM, low torque output to low RPM, high torque.

Bangladesh University of Engineering and Technology (BUET) Turboprop

Bangladesh University of Engineering and Technology (BUET) Turboprop Airbus Military Cargo Aircraft

Bangladesh University of Engineering and Technology (BUET) Turboprop Airbus Military Cargo Aircraft

End of Model Lab!!!!!!!!!!! Thanks a Lot!!!!! Bangladesh University of Engineering and Technology (BUET) End of Model Lab!!!!!!!!!!! Thanks a Lot!!!!! Best of Luck for everyone!!!!!!!! Remember - The Shawshank Redemption (1994)