Comments on AMS obtaining DL/UL parameters (16.2.15.2) IEEE 802.16 Presentation Submission Template (Rev. 9) Document Number: IEEE C80216m-10_0763 Date Submitted: 2010-7-7 Source: Whai-En Chen, Shih-Yuan Cheng, Yu-Chan Lin wechen@niu.edu.tw National Ilan University Shiann-Tsong Sheu, Chih-Cheng Yang stsheu@ce.ncu.edu.tw National Central University Kanchei(Ken) Loa, Yi-Ting Lin, Tsung-Yu Tsai, Youn-Tai Lee, Chun-Yen Hsu, Chiu-Wen Chen loa@iii.org.tw Institute for Information Industry Yang-Han Lee, Yih Guang Jan Tamkang University *<http://standards.ieee.org/faqs/affiliationFAQ.html> Venue: IEEE Session#68, San Diego, California, USA. Re: IEEE 802.16-10/0011, “IEEE 802.16 Working Group Sponsor Ballot”, on P802.16m/D6 Base Contribution: This is base contribution. Purpose: To be discussed and adopted by TGm for 802.16m SB. Notice: This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.1 Patent Policy: The contributor is familiar with the IEEE-SA Patent Policy and Procedures: <http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and <http://standards.ieee.org/guides/opman/sect6.html#6.3>. Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and <http://standards.ieee.org/board/pat >.

Introduction Page 543 line 31 Table 840 states that “If Cell Bar bit = 0b1, this cell shall not be allowed for network entry or re-entry” In Page 374 line 34 Figure 443, the AMS does not perform network entry to a cell Cell Bar bit=1. However, in page 378 line 32 section 16.2.15.2 “AMS obtaining DL/UL parameters” states that “If the AMS reads cell_bar =1 in SFH, this which means this cell does not allow access of new AMS and the AMS shall select a different cell to restart network entry procedure.”

Page 543 line 31 Table 840—S-SFH SP1 IE format If Cell Bar bit = 0b1, this cell shall not be allowed for network entry or re-entry Syntax Size(bit) Notes Cell bar information 1 If Cell Bar bit = 0b1, this cell shall not be allowed for network entry or re-entry

Page 374 line 34 Figure 443—AMS Initialization Overview

Proposed Text [Modify the following text in page 378 line 32 section 16.2.15.2 “AMS obtaining DL/UL parameters”] If the AMS reads cell_bar =1 in SFH, this which means this cell doesshall not allow access of new AMS and the AMS shall select a different cell to restart network entry procedure.