VERTICAL MACHINES NEXEEN – V100 TO NEXEEN – V200 Note: MODEL Specifications UNIT A B Screw Diameter mm 30 35 40 Injection Pressure kg/cm2 1146 842 1165 892 Shot Size (Theoretical) cm³ 95 130 155 207 202 263 Max Shot Weight (PS) gm 60 100 150 200 Screw Speed rpm 0-200 No. Of Temperature Control zone 4 5 Material Hopper Capacity - 10 20 Clamping Force ton 50 Opening Force 8.3 13 Max. Mold Size (L×W) Mm 260×280 280×280 340×340 Opening Stroke 210 290 320 Max. Mold Height 260 295 350 Min. Mold Height 135 Max Open Daylight 470 585 670 Ejector Force 1.3 2 Ejector Stroke 70 Max. Hydraulic Pressure 140 Oil Reservoir Capacity ltr 220 Pump Motor kW 3.72 5.6 7.45 Barrel Heating Power 6.1 Machine Weight 1.2 1.5 Machine Dimension (L×W×H) m 2×1.1×2.8 2×1.1×2.9 2.4×1.2×3 Note: We use rexroth solenoid valves in our machines. All machines are available with proportional valve / variable pump / servo motor Actual shot weight will be varied to various materials, above given data is subject to change. www.nexeenmachine.com

VERTICAL MACHINES NEXEEN – V300 AND NEXEEN – V500 Note: MODEL Specifications UNIT A B Screw Diameter mm 35 40 50 / 55 Injection Pressure kg/cm2 1165 892 965 Shot Size (Theoretical) cm³ 298 389 638 Max Shot Weight (PS) gm 200 300 500 Screw Speed rpm 0-200 No. Of Temperature Control zone 5 6 Material Hopper Capacity - 20 30 Clamping Force ton 60 70 Opening Force 13 Max. Mold Size (L×W) Mm 340×340 Opening Stroke 320 430 Max. Mold Height 350 400 Min. Mold Height 135 233 Max Open Daylight 670 830 Ejector Force 2 Ejector Stroke Max. Hydraulic Pressure 140 Oil Reservoir Capacity ltr 220 Pump Motor kW 7.45 11.20 Barrel Heating Power 6.1 8.3 Machine Weight 2.5 Machine Dimension (L×W×H) m 2.4×1.2×3 2.6×1.2×3.7 Note: We use rexroth solenoid valves in our machines. All machines are available with proportional valve / variable pump / servo motor Actual shot weight will be varied to various materials, above given data is subject to change. www.nexeenmachine.com

T-slot with screw holes HORIZONTAL MACHINES NEXEEN – 85 TO NEXEEN – 130 MODEL NEXEEN-85 NEXEEN-100 NEXEEN-130 INJECTION UNIT UNIT A B C Screw Diameter mm 32 35 38 42 45 Screw L/D Ratio   22 20.1 18.5 20.3 18.4 24 Shot Size (Theoretical) cm³ 133 160 190 163 193.2 235 226 277 318 Injection Weight (PS) GMS 121 146 173 148 176 214 206 252 289 Injection Pressure Mpa 203 170 144 219 184 152 208 171 149 Screw Speed rpm 225 210 185 CLAMPING UNIT Clamp Tonnage KN 800 900 1300 Toggle Stroke 320 350 380 Tia Bar Diameter 60 65 70 Space b/w Tie Bars 360×340 370×370 420×420 Max. Mold Height 450 Min Mold Height 150 Ejector Stroke 90 120 140 Ejector Tonnage 30 50 OTHERS Max. Pump Pressure 16 Pump Motor Power KW 11 13 Heater Power 6.5 7.5 8 Machine Dimension (L×W×H) m 3.9×1.2×1.8 4.3×1.3×2.0 4.6×1.5×2.1 Machine Weight t 2.8 3.4 4 Screw T-slot with screw holes Cylinder Double carriage Note: This is T-slot series. Platens consist with T-slot and screw holes. Toggle system is integrated with second and third platen (one piece casting). Five point toggle system is used. All machines are available with proportional valve / variable pump / servo motor Theoretical injection volume = Sectional area of the injection moulding machine barrel × Injection distance Actual shot weight = Theoretical injection volume × 0.9 × 1.05 (Calculated with GPPS) Under normal condition, specifications and parameters may be improved without notification. When you need to process engineering plastics like PVC, PC, PMMA, Nylon, Glassfield, please notify us for verification of output. www.nexeenmachine.com

T-slot with screw holes HORIZONTAL MACHINES NEXEEN – 170 TO NEXEEN – 260 MODEL NEXEEN-170 NEXEEN-220 NEXEEN-260 INJECTION UNIT UNIT A B C Screw Diameter mm 42 45 50 55 60 Screw L/D Ratio   23.6 22 19.8 24.4 20 24 20.3 Shot Size (Theoretical) cm³ 311 357 441 397 490 593 592 704 826 Injection Weight (PS) GMS 283 325 402 362 446 540 539 641 752 Injection Pressure Mpa 203 177 143 207 168 138 202.3 170 144.9 Screw Speed rpm 180 155 220 CLAMPING UNIT Clamp Tonnage KN 1600 2200 2600 Toggle Stroke 435 475 Tia Bar Diameter 80 90 95 Space b/w Tie Bars 470×470 520×520 570×570 Max. Mold Height 520 560 600 Min Mold Height 200 Ejector Stroke 140 150 Ejector Tonnage 70 Ejector Number Nos. 5 OTHERS Max. Pump Pressure 16 Pump Motor Power KW 18.5 30 Heater Power 12.5 14 19 Machine Dimension (L×W×H) m 5.1×1.5×2.2 5.7×1.6×2.3 6.2×1.5×2.2 Machine Weight t 6 7 8.3 Screw T-slot with screw holes Cylinder Double carriage Note: This is T-slot series. Platens consist with T-slot and screw holes. Toggle system is integrated with second and third platen (one piece casting). Five point toggle system is used. All machines are available with proportional valve / variable pump / servo motor Theoretical injection volume = Sectional area of the injection moulding machine barrel × Injection distance Actual shot weight = Theoretical injection volume × 0.9 × 1.05 (Calculated with GPPS) Under normal condition, specifications and parameters may be improved without notification. When you need to process engineering plastics like PVC, PC, PMMA, Nylon, Glassfield, please notify us for verification of output. www.nexeenmachine.com

T-slot with screw holes HORIZONTAL MACHINES NEXEEN – 290 TO NEXEEN – 400 MODEL NEXEEN-290 NEXEEN-350 NEXEEN-400 INJECTION UNIT UNIT A B C Screw Diameter mm 55 60 65 70 75 80 Screw L/D Ratio   24 22 20.3 21.5 20 18.7 21.4 18.8 Shot Size (Theoretical) cm³ 676 805 945 1161 1226 1407 1324 1520 1729 Injection Weight (PS) GMS 615 733 860 1057 1205 1383 1573 Injection Pressure Mpa 202.3 170 144.9 195 168 146 199 173 152 Screw Speed rpm 220 160 CLAMPING UNIT Clamp Tonnage KN 2900 3500 4000 Toggle Stroke 590 670 710 Tia Bar Diameter 100 110 120 Space b/w Tie Bars 620×620 710×630 760×670 Max. Mold Height 630 780 Min Mold Height 200 260 250 Ejector Stroke 150 Ejector Tonnage 90 Ejector Number Nos. 5 9 OTHERS Max. Pump Pressure 16 Pump Motor Power KW 30 37 Heater Power 19 24.5 26 Machine Dimension (L×W×H) m 6.3×1.7×2.4 7.3×1.8×2.2 7.3×1.96×2.41 Machine Weight t 9.3 12.5 14.2 Screw T-slot with screw holes Cylinder Double carriage Note: This is T-slot series. Platens consist with T-slot and screw holes. Toggle system is integrated with second and third platen (one piece casting). Five point toggle system is used. All machines are available with proportional valve / variable pump / servo motor Theoretical injection volume = Sectional area of the injection moulding machine barrel × Injection distance Actual shot weight = Theoretical injection volume × 0.9 × 1.05 (Calculated with GPPS) Under normal condition, specifications and parameters may be improved without notification. When you need to process engineering plastics like PVC, PC, PMMA, Nylon, Glassfield, please notify us for verification of output. www.nexeenmachine.com

T-slot with screw holes HORIZONTAL MACHINES NEXEEN – 450 AND NEXEEN – 550 MODEL NEXEEN-450 NEXEEN-550 INJECTION UNIT UNIT A B C D Screw Diameter mm 75 80 85 90 95 Screw L/D Ratio   21.3 20 18.8 23 21.1 19.5 Shot Size (Theoretical) cm³ 1679 1910 2156 2187 2468 2767 3082 Injection Weight (PS) GMS 1528 1738 1962 1990 2246 2518 2805 Injection Pressure Mpa 195 172 152 188 167 149 134 Screw Speed rpm 155 150 CLAMPING UNIT Clamp Tonnage KN 4500 5500 Toggle Stroke 760 900 Tia Bar Diameter 130 Space b/w Tie Bars 800×720 900×820 Max. Mold Height 800 850 Min Mold Height 300 350 Ejector Stroke 200 250 Ejector Tonnage 110 Ejector Number Nos. 13 OTHERS Max. Pump Pressure 16 Pump Motor Power KW 45 55 Heater Power 34 36 Machine Dimension (L×W×H) m 7.6×1.9×2.3 9.3×2.1×2.4 Machine Weight t Screw T-slot with screw holes Cylinder Double carriage Note: This is T-slot series. Platens consist with T-slot and screw holes. Toggle system is integrated with second and third platen (one piece casting). Five point toggle system is used. All machines are available with proportional valve / variable pump / servo motor Theoretical injection volume = Sectional area of the injection moulding machine barrel × Injection distance Actual shot weight = Theoretical injection volume × 0.9 × 1.05 (Calculated with GPPS) Under normal condition, specifications and parameters may be improved without notification. When you need to process engineering plastics like PVC, PC, PMMA, Nylon, Glassfield, please notify us for verification of output. www.nexeenmachine.com

T-slot with screw holes HORIZONTAL MACHINES NEXEEN – 650 AND NEXEEN – 750 MODEL NEXEEN-650 NEXEEN-750 INJECTION UNIT UNIT A B C D Screw Diameter mm 85 90 95 100 105 110 Screw L/D Ratio   22.3 21 19.9 18.9 23.2 22 19 Shot Size (Theoretical) cm³ 2303 2582 2877 3188 2868 3195 3903 4283 Injection Weight (PS) GMS 2096 2350 2618 2901 2610 2907 3552 3898 Injection Pressure Mpa 206 184 164 149 195 175 143 131 Screw Speed rpm 125 130 CLAMPING UNIT Clamp Tonnage KN 6500 7500 Toggle Stroke 930 1000 Tia Bar Diameter 160 165 Space b/w Tie Bars 960×880 1000×940 Max. Mold Height 900 Min Mold Height 350 400 Ejector Stroke 260 300 Ejector Tonnage 200 Ejector Number Nos. OTHERS Max. Pump Pressure 16 Pump Motor Power KW 30+30 30+37 Heater Power 37.2 49 Machine Dimension (L×W×H) m 9.6×2.4×2.7 10.6×2.6×2.8 Machine Weight t 32 39 Screw T-slot with screw holes Cylinder Double carriage Note: This is T-slot series. Platens consist with T-slot and screw holes. Toggle system is integrated with second and third platen (one piece casting). Five point toggle system is used. Theoretical injection volume = Sectional area of the injection moulding machine barrel × Injection distance Actual shot weight = Theoretical injection volume × 0.9 × 1.05 (Calculated with GPPS) Under normal condition, specifications and parameters may be improved without notification. When you need to process engineering plastics like PVC, PC, PMMA, Nylon, Glassfield, please notify us for verification of output. www.nexeenmachine.com

NEXEEN MACHINES NOW A BETTER WAY TO MOLD KNOW US OUR COMMITMENT Shreeji Engineering is one the leading manufacturers of Plastics Injection Moulding Machines in India. With our focus on building a qualitative and cost effective injection molding machines, we can offer the most economic solution in this industry. Nexeen plastic injection moulding machines are always a step ahead with the integration of latest features like errorless precision, smart control panel and cutting-edge compact designs. Innovation with Quality Performance and Reliability Precision based design Service towards satisfaction www.nexeenmachine.com

Shreeji Engineering Plot no. G-1825, K-2 Road, Opp. Shree Ram hospital, Kishan Gate. Taluka: Lodhika. Dist.: Rajkot. Pin Code: 360 021 +91 7984192125 sales@nexeenmachine.com www.nexeenmachine.com