PANDA Cryostat and Yoke Status of work BINP, Sergey Pivovarov, Panda magnet meeting at GSl, September 08, 2015

Yoke, Platform and Frame

BINP received the specification of Yoke, Platform and Frame of PANDA detector on May 2015. According this specification we began work with BINP design department, technology department, BINP workshop and Russian plants.

3D model of the Yoke, Platform and Frame .

We carried out a few meetings with staff of Russian plants We carried out a few meetings with staff of Russian plants. As result we prepared assembly drawings of the one octant of Yoke with all requirement.

Assembly drawing of the octant of Yoke

Assembly drawing of the octant of Yoke

According this drawings the plant sent to BINP a offers According this drawings the plant sent to BINP a offers. Schedule of manufacturing and delivery of Yok:   Start of works 10.2015 Design works till 04.2016 Purchase raw material and instruments from 01.2016 till 01.2017 Manufacturing from 04.2016 till 06.2017 Tests in Novosibirsk side 09.2017 Delivery to GSI 12.2017 Assembly and tests in GSI side 05.2018

Manufactured assembly drawings of one octant are ready. Conclusion Manufactured assembly drawings of one octant are ready. Cost of Yoke, Platform and Frame is estimated. The cost is 3647 KEuro with exchange rate of Ruble/Euro equal 65. We need to sign of contract with FAIR to continue the design work, prepare a documentation for tenders and etc. We suggest to sign of contract with FAIR only for design work that don’t delay the project.

Cryostat and Valve Box

3D model of the Cryostat and Valve Box.

Plan of work on September, 2015: Specification of Cryostat is ready. Cryogenic scheme should be approved together with BINP. Instrumentation should be approved together with BINP. Heat loads should be approved together with BINP after final design. Preliminary assembling drawings of Cryostat are prepared. Preliminary technologic work is made. Manufacture and tests of Cryostat will be made at BINP.

Assembly drawing of the Cryostat

Assembly drawing of the Cryostat

Cost of Cryostat with Valve Box is estimated. Conclusion Cost of Cryostat with Valve Box is estimated. The cost is 2778 KEuro with exchange rate of Ruble/Euro equal 65. All instrumentation we plan purchase in European companies The drawings and valve Box will be approved by third side. We need to sign of contract with FAIR to continue the design work, prepare a documentation for tenders and etc. We suggest to sign of contract with FAIR only for design work that don’t delay the project. We will pleasure to see you in our Institute in the nearest time to see our production.

Thank for you attention!