RapidFinder Analysis Software How-To Guide This is the default title slide for Thermo Fisher Scientific Title photo options specific to end-markets will be available via commercial overview presentations due for release 2015-2016 RapidFinder Analysis Software How-To Guide Initial Setup

Initial Setup after Software Installation There are two important steps in configuring RapidFinder Analysis Software v1.0 after it has been installed for the first time: Importing assay kit files: This process creates a library of Assays that can be used to setup and run experiments. Connecting to QuantStudio 5 instrument(s): This process creates a virtual (over the network) or direct cable connection to QuantStudio 5 instruments. To create a new presentation Double-click or Open from PowerPoint > [xxxtemplate].potx file. Start building in this template and save as a new presentation. Avoid copy & paste or drag & drop of slides from other presentations in different templates. This often can cause master template conflicts and increased file sizes. Instead… To leverage content from other presentations, (1) select just the content on a slide that you need (2) copy & paste into a [blank] slide in this template (3) Control pasted content appearance via the paste options button that appears immediately after a paste action and which provides the option to choose either “use destination formatting” or “maintain source formatting” of pasted content. Applying New Template Theme to an Existing Presentation : From the Design Tab in the ribbon, click on the “more” drop down arrow at the right of the theme ribbon Select “Browse for Themes…” Navigate to and select [xxxtemplate].potx file and click Apply This will apply new Template Theme colors, fonts and layouts but will not include any of the content on the slide examples from the full template itself. Reposition content and reapply or change layouts as needed. Additional resources available on iConnect > Functions > Marketing > Resource Library

Importing Assays To create a new presentation You can also select Manage then Assays from the main menu To create a new presentation Double-click or Open from PowerPoint > [xxxtemplate].potx file. Start building in this template and save as a new presentation. Avoid copy & paste or drag & drop of slides from other presentations in different templates. This often can cause master template conflicts and increased file sizes. Instead… To leverage content from other presentations, (1) select just the content on a slide that you need (2) copy & paste into a [blank] slide in this template (3) Control pasted content appearance via the paste options button that appears immediately after a paste action and which provides the option to choose either “use destination formatting” or “maintain source formatting” of pasted content. Applying New Template Theme to an Existing Presentation : From the Design Tab in the ribbon, click on the “more” drop down arrow at the right of the theme ribbon Select “Browse for Themes…” Navigate to and select [xxxtemplate].potx file and click Apply This will apply new Template Theme colors, fonts and layouts but will not include any of the content on the slide examples from the full template itself. Reposition content and reapply or change layouts as needed. Additional resources available on iConnect > Functions > Marketing > Resource Library To add SureTect and other assays, click No Assays Available from the Home screen.

Manage Assays Screen Note: You must first download and save the desired Assay Kit File from the product website before you can import them into RapidFinder Analysis Software. To create a new presentation Double-click or Open from PowerPoint > [xxxtemplate].potx file. Start building in this template and save as a new presentation. Avoid copy & paste or drag & drop of slides from other presentations in different templates. This often can cause master template conflicts and increased file sizes. Instead… To leverage content from other presentations, (1) select just the content on a slide that you need (2) copy & paste into a [blank] slide in this template (3) Control pasted content appearance via the paste options button that appears immediately after a paste action and which provides the option to choose either “use destination formatting” or “maintain source formatting” of pasted content. Applying New Template Theme to an Existing Presentation : From the Design Tab in the ribbon, click on the “more” drop down arrow at the right of the theme ribbon Select “Browse for Themes…” Navigate to and select [xxxtemplate].potx file and click Apply This will apply new Template Theme colors, fonts and layouts but will not include any of the content on the slide examples from the full template itself. Reposition content and reapply or change layouts as needed. Additional resources available on iConnect > Functions > Marketing > Resource Library Click Import and select the .xen file for the assay kit you would like to import.

Importing Assays - Continued You can also permanently remove an assay from the system. Deleted assays will no longer be shown on this list and will not be available for use. You can also customized the color designation of the assay that will appear in lists and plate setup. The selected assay will be shown in the list of assays. Each assay has a unique Product Code and Version number Different versions of the same assay can be added to this list. You can Enable (when checked - making it available for use) or Disable (when unchecked – hiding it from use) and assay. Disabled assays will not appear in the list of assays to choose from during plate setup. Click OK to when done.

Connecting to Instruments You can also select Manage then Instruments from the main menu To create a new presentation Double-click or Open from PowerPoint > [xxxtemplate].potx file. Start building in this template and save as a new presentation. Avoid copy & paste or drag & drop of slides from other presentations in different templates. This often can cause master template conflicts and increased file sizes. Instead… To leverage content from other presentations, (1) select just the content on a slide that you need (2) copy & paste into a [blank] slide in this template (3) Control pasted content appearance via the paste options button that appears immediately after a paste action and which provides the option to choose either “use destination formatting” or “maintain source formatting” of pasted content. Applying New Template Theme to an Existing Presentation : From the Design Tab in the ribbon, click on the “more” drop down arrow at the right of the theme ribbon Select “Browse for Themes…” Navigate to and select [xxxtemplate].potx file and click Apply This will apply new Template Theme colors, fonts and layouts but will not include any of the content on the slide examples from the full template itself. Reposition content and reapply or change layouts as needed. Additional resources available on iConnect > Functions > Marketing > Resource Library To connect to an instrument, you must register the instrument by clicking No Instruments Registered from the Home screen.

Connecting to Instruments - Continued If you choose to connect to the instrument directly via an ethernet network cable (connecting one end of the network cable to the network port on your computer and the other end to the network port on the instrument), you must select the Discover… option to detect the connection. There are two ways to connect to an instrument without a direct cable connection: Register by IP Address: Selecting this option will display a dialog prompting you to enter the IP address of the instrument. You can get the IP address of the instrument from the instrument’s Settings screen by selecting About Instrument, and About Instrument again. Discover: This option will search the network for a compatible QuantStudio 5 instrument connected to the local area network. The Discover option may not work if the instrument is connected to a different subnet than the computer RFA software is running on.

Connecting to Instruments - Continued After you have registered an instrument, the list will display important information about the instrument. You can Unregister an instrument if you decide you will not be using that instrument again. List Experiments will display a list of of experiments that have been completed and stored on the instrument. You can Rename an instrument so that you can more easily identify the instrument by name rather than serial number. The Status field shows whether the instrument is connected, active, or idle. Refresh Status will update the instrument’s status immediately. Click OK to when done.

Home Screen after Assay and Instrument Configuration After importing assays and registering instruments, the Home screen will display the number of assays and instruments available for use. Here we have one instrument and one assay.