SAFETY IN THE SHOP Most Important! Ms. Nickerson

PRESENTATION OUTLINE GENERAL SHOP SAFETY HOUSEKEEPING FIRE PREVENTION MANAGEMENT WELDING SHOP SAFETY EYE PROTECTION DRESS CODE BEHAVIOR VENTILATION

Housekeeping Cleaning work areas Sweeping—prevent slips and falls Keeping designated walking areas clear of debris Restoring equipment and tools after job is completed You are not the only class using this space so leave it nice so they will leave it nice!

Fire Prevention Discard frayed cords and wires Keep flammable liquids away from heat Class C fire extinguishers for electrical fires with a 15 foot maximum distance apart

General Management Safety programs—training, meetings, etc. MSDS sheets Emergency phone numbers

SAFETY: Eye Protection “An ounce of prevention is worth a pound of cure” when it comes to eye protection Always wear proper eye protection when working in the shop A welder must be protected from harmful light radiation given off by the welding process For this course you will be using safety glasses, goggles and a welding helmet

Here are examples of proper eye protection

Dress Code Wear properly fitted clothes. When welding, sleeves should be buttoned and gloves should be worn. Wear boots or high top; Tightly laced shoes. Do not wear loose clothing, shirt tails, and unbuttoned sleeves around power equipment. Do not wear clothes that you do not want to get dirty.

Here’s a good example of a welder wearing all the proper welding protection

Behavior Most accidents are caused by carelessness Caused by human error Refrain from getting involved in poor shop behavior. No cell phones in the shop. It is like driving, I don’t want you to be distracted

Welding Fumes Welding fumes can be harmful to the welder causing implications such as: Irritation of the respiratory tract Metal fume fever A condition known as siderosis Slightly increase the risk of lung cancer For these reasons, one should take precaution with welding fumes

Welding Fumes Welding should be done in a well ventilated area Should attempt to control fumes at the source Common ways Extracted benches Local exhaust ventilation

Common Ventilation Practices Extracted bench method Local exhaust ventilation

Examples of Welding Practices

Conclusion This is a quick run down. As we use different pieces of equipment we will go over specific safety. Questions??????