J. Seeman Perugia Super-B Meeting June 2009

Slides:



Advertisements
Similar presentations
Page 1 Collider Review Retreat February 24, 2010 Mike Spata February 24, 2010 Collider Review Retreat International Linear Collider.
Advertisements

1 BROOKHAVEN SCIENCE ASSOCIATES NSLS-II ASAC-2007, April. 23, 2007 Injection System with a Booster in Separate Tunnel T. Shaftan for the NSLS-II team.
New 135-MeV injector energy requires minor changes to linac operating point…
Overview of ILC Plans D.Rubin April 17, D. Rubin2 ILC R&D Activities and Plans 1.Positron Source 2.Damping Ring 3.Low Emittance Transport - damping.
(ISS) Topics Studied at RAL G H Rees, RAL, UK. ISS Work Areas 1. Bunch train patterns for the acceleration and storage of μ ± beams. 2. A 50Hz, 1.2 MW,
A U.S. Department of Energy Office of Science Laboratory Operated by The University of Chicago Argonne National Laboratory Office of Science U.S. Department.
3 GeV,1.2 MW, Booster for Proton Driver G H Rees, RAL.
1 C-Band Linac Development Satoshi Ohsawa 2004.Feb.19LCPAC.
Low Emittance RF Gun Developments for PAL-XFEL
FAST KICKER STATUS Fabio Marcellini On behalf of LNF fast kickers study group* * D. Alesini, F. Marcellini P. Raimondi, S. Guiducci.
After Posipol In my opinion we are still too much dispersed. We have to re compact our community if we want to succeed in presenting a Compton version.
Electron Source Configuration Axel Brachmann - SLAC - Jan , KEK GDE meeting International Linear Collider at Stanford Linear Accelerator Center.
DR 3.2 km Lattice Requirements Webex meeting 10 January 2011.
9/24-26/07 e- KOM Slide 1/20 ILC Polarized e- source RDR Overview A. Brachmann.
Damping Ring Parameters and Interface to Sources S. Guiducci BTR, LNF 7 July 2011.
ParameterL-bandS-bandX-band Length (m) Aperture 2a (mm) Gradient (Unloaded/Loaded) (MV/m)17/1328/2250/40 Power/structure (MW) Beam.
The Introduction to CSNS Accelerators Oct. 5, 2010 Sheng Wang AP group, Accelerator Centre,IHEP, CAS.
For Layout of ILC , revised K.Kubo Based on following choices. Positron source: Prepare both conventional and undulator based. Place the.
Damping Ring Specifications S. Guiducci ALCPG11, 20 March 2011.
Main Technical Issues of theSuper B Injector Main Technical Issues of the Super B Injector SuperB Meeting, Isola d’Elba, May 31st – June 3rd, 2008 D. Alesini,
X-band Based FEL proposal
MAX IV linac overview and scope of automation Sara Thorin.
Injection System Update S. Guiducci (LNF) XVII SuperB Workshop La Biodola, Isola d'Elba, May 29 th 5/29/111.
PAL-XFEL Commissioning Plan ver. 1.1, August 2015 PAL-XFEL Beam Dynamics Group.
FCC-ee injector complex including Booster Yannis Papaphilippou, CERN Thanks to: M.Aiba (PSI), Ö.Etisken (Ankara Un.), K.Oide (KEK), L.Rinolfi (ESI-JUAS),
High intensity electron beam and infrastructure Paolo Valente * INFN Roma * On behalf of the BTF and LINAC staff.
Frank Stulle, ILC LET Beam Dynamics Meeting CLIC Main Beam RTML - Overview - Comparison to ILC RTML - Status / Outlook.
SuperB Injector (2) R. Boni, INFN-LNF - on behalf of the “Injector Study Group” SuperB Mini-MAC, Frascati July, 2008 D. Alesini, R. Boni, F. Marcellini,
Multi-bunch Operation for LCLS, LCLS_II, LCLS_2025
Super-B Accelerator Status
Positron Source and Injector
Positron Sources of Next generation B-factories (SuperKEKB, SuperB)
Abstract EuSPARC and EuPRAXIA projects
Sara Thorin, MAX IV Laboratory
Injector and positron source scheme. A first evaluation Thanks to O
Status of the CLIC main beam injectors
Auxiliary Positron Source
CLIC Damping ring beam transfer systems
INJECTION SYSTEM UPDATE
Have a chance to operate your own beam at CERN
SuperB Injection, RF stations, Vibration and Operations
Linac possibilities for a Super-B
Michael Sullivan and John Seeman SLAC National Accelerator Laboratory
Junji Urakawa (KEK) for ATF International Collaboration
Top-Up Injection for PEP-II and Applications to a Higgs Factory
Injection facility for Novosibirsk Super Charm Tau Factory
SuperB project. Injection scheme design status
ERL Main-Linac Cryomodule
CLIC source update CLIC main beam injectors reminder
LCLS Commissioning Parameters
LCLS Commissioning Parameters
Capture and Transmission of polarized positrons from a Compton Scheme
Electron Source Configuration
SuperB e+/e- main linac and diagnostics studies
LAL meeting on e+ studies, Oct. 2010
CEPC Injector Damping Ring
Cui Xiaohao, Bian Tianjian, Zhang Chuang 2017/11/07
CEPC Injector positron source
LCLS Commissioning Parameters
Advanced Research Electron Accelerator Laboratory
AC Power for a Super-B Factory
Super-B Factory in a “4400m” Tunnel
CEPC injector beam dynamics
Cost Algorithm for a Super-B Factory
LCLS Commissioning Parameters
Proposal for Smith-Purcell radiation experiment at SPARC_LAB
Kicker and RF systems for Damping Rings
CDR2 – Injection System Injection system overview (Seeman) (2 pages)
Technical challenges for forming the double intensity section of JLEIC ion beam Jiquan Guo.
Electron mode A B C D > 4 GeV e- θ g e- DR α PS
Presentation transcript:

J. Seeman Perugia Super-B Meeting June 2009 Injection Issues J. Seeman Perugia Super-B Meeting June 2009 7/19/2019 Super-B Perugia

Super-B Parameter Options 7/19/2019 Super-B Perugia

New Parameters (comparison with March 09) 7/19/2019 Super-B Perugia

Potential LNF Super-B location (May) (Tomassini, Raimondi, and Sanelli, May 09) 7/19/2019 Super-B Perugia

Needed injection rates N = 6 x 1010. n = 1600 Lifetime = 5 min. dN/dt = 1600*6 x 1010/5/60 = 3.2 x1011/sec Inject each beam at 25 Hz Inject, say, 5 bunches per pulse Particles per inject bunch = 2.6 x 109 7/19/2019 Super-B Perugia

Injector RF Layout (Boni, Guiducci, Seeman) A B C D ACCELERATING FIELD e- DR > 4 GeV e- A B C D GUN SHB L - 0.8 GeV 5.7 GeV 0.1GeV 0.8 GeV > 7 GeV e+ PS e+ DR ACCELERATING FIELD MEDIUM GRADIENT HIGH GRADIENT 23 MV/m 26 MV/m 60 MW klystron 50 MW klystron 55 MW 45 MW X X SLED SLED ≈ 210 MeV ≈ 156 MeV

Injector and Linac Will the SLC polarized gun be adequate? Can a short pulse polarized laser on the cathode make a 3 mm bunch? Can the beam emittance from the gun be smaller? Parameters of the spin rotators? RF and structure design? (Boni) Quadrupole lattice for the linac? Quadrupole lattice for the transport lines? Geometry of the transport lines? Diagnostics needed? Tolerances on magnets and RF? 7/19/2019 Super-B Perugia

Damping Rings Lattice (~54 m) (Guiducci) DR energy: 1 GeV or 800 MeV? RF parameters? Injection septa and kickers? Vacuum system needed? Tolerances of all magnets, RF, alignment? 7/19/2019 Super-B Perugia

Ring Injection Injection kicker design? Septa design? Septa fringe fields on stored beam? 7/19/2019 Super-B Perugia

Injection R&D Items Make e+ at 100 MeV? Kickers at 10 nsec pulse? Ceramic or stripline kicker? Use DAFNE hall for DRs? Gradient for e+ capture section? Septum blade thickness? How many bunches per injection pulse? Accelerate train of high charge e- to make train of e+ bunches? Highest beta-x at injection point: >250 m? Transfer line design? Bunch compressor? DR optimum E?( >1 GeV?) Damp for two cycles? Linac pulse length? C band? 7/19/2019 Super-B Perugia