DAC3282 Setup (Issues)

The DAC software is set to all of the settings provided to me The DAC software is set to all of the settings provided to me. (also default settings)

6V power is connected to the DAC3282EVM at connector J6 6V power is connected to the DAC3282EVM at connector J6. The DAC3282EVM is connected to the PC with USB. The output of TRF3720 is connected to the spectrum analyzer. PLL lock is lit

Program is launched and setup with the exact same settings as in the example given. And the send button is hit. When the send button is hit the TSW1400 draws more current so it appears that something is happening. Two things that are different between my example and the one given to me is that I am running version4.7 and the example given shows version4.59 of High Speed Data Converter Pro. Also my program states that it is running firmware version 0.2 and the one given states that it is running version 0.0.

All LED’s are lit on the TSW1400 except D5 and D7.

There is only the carrier frequency and no tones visible on the Spectrum Analyzer after the tone is sent and the setup is correct.