1 HOME B USINESS I NDUSTRY

2 L ITE 2GP-IP E THERNET IP L ITE 2GP GSM/GPRS PSTN SMS Ethernet PSTN Ethernet GSM/GPRS PSTN SMS After an actualization and preceding the configuration, the JR Lite- 2GP communicator is able to make the bidirectionality by GPRS or Ethernet with any control panel of the market with modulation Bell 103 or V21, this function is only available from the 5.25 firmware version.

3 Phone communicator for alarm panel Programming through the JR E-light software 2 zones + 2 outputs SMS remote control Bidirectionality with any other control panel on the market if you have the V21 or Bell 103. (DSC, Ademco,Honeywell, Paradox,Bosch, Risco, Network NX-8/NX-4, Texecom, Aritech,Pyronix or Napco). The Lite-2GP range of ATS enable to users to substitute a traditional alarm systems with PSTN communication by an IP base and/or by a wireless network, without have to improve or change the alarm system. The system ATS LITE2-G is the only eauipment which, quickly and cost- effectively, offer an access to any alarm system to the alternatif network, such as GSM, GPRS et Ethernet.

4 The equipment was made to comply with all safety rules in accordance with the European directives : 2004/108/ECGeneral directive of electromagnetic compatibility 2006/95/ECDirective of low tension. 99/5/CEDirective R&TTE EN Equipement of information technology. Safety. TBR21Access to the PSTN. EN Grade 2 Requirements for intruder alarm systems. EN electromagnetic compatibility norms( CEM) for radioelectric equipments and services. EN50136Alarm transmission system.

5 Dimensions Length 5 cm Width 11 cm Depth 5 cm weight(approximate) 200 g Dimensions Length 5 cm Width 11 cm Depth 5 cm weight(approximate) 200 g Environmental class Class II Operating Temperature de -10 à +40 C ̊ Operating Humidity 0…75% without condensation Power card VDC - 500mA Environmental class Class II Operating Temperature de -10 à +40 C ̊ Operating Humidity 0…75% without condensation Power card VDC - 500mA Average consumption PCB 45mA GSM Module 15mA Ethernet Plug-in 40mA With activated GSM calls 300mA With input GSM calls + ringer 500mA Average consumption PCB 45mA GSM Module 15mA Ethernet Plug-in 40mA With activated GSM calls 300mA With input GSM calls + ringer 500mA Antenna Performance 2.15dBi Frequency 900/1800Mhz Antenna Performance 2.15dBi Frequency 900/1800Mhz Zone RFL Normal 2K2Ω Tamper 820 Ω Zone RFL Normal 2K2Ω Tamper 820 Ω Sorties (Collecteur ouvert) O1 Negative / 100mA O2 Negative / 100mA Sorties (Collecteur ouvert) O1 Negative / 100mA O2 Negative / 100mA

6 Control panel bidirectionality software: Makes a bidirectional connection request to the phone number of the control panel. Com0com: forward this request to the Com2log Vmodem Server by its virtual ports COM. Com2log Vmodem Server: receive the request. Com2log Vmodem Server: communicate via the local network with the JR-Log-MCP to ask a connexion with the control panel which have this number

7 JR-Log-MCP :Receive the request from the Com2log Vmodem Server. JR-Log-MCP : Check in its data base the subscriber number corresponding to the telephone number required. When you will find the subscriber number, ask that the CS-LT-2G / CS-4G establish a direct bidirectional connexion with the software Com2log Vmodem server. CS-LT-2G / CS-4G : Receive the request from the JR-Log-MCP. CS-LT-2G / CS-4G : establish a bidirectional communication from the alarm central to the établit Com2log Vmodem Server. Com2log Vmodem Server : receive the connexion from the CS-LT-2G / CS-4G. From there, the bidirectional connection is established between the alarm central of the user and the bidirectional software of the brand of the control panel

8

9 Control panel bidirectionality software : Makes a bidirectional connection request to the phone number of the control panel. Com0com: Forward this request to the Com2log Vmodem Server by its virtual ports COM. Com2log Vmodem Server: receive the request. Com2log Vmodem Server: communicate through internet with the JR-Log-MCP (situated in the control panel which make the maintenance of its facilities) to ask a connexion with the control panel which have this number. Agent: Observes the window with the SMS request on the computer where the Com2log Vmodem Server is installed. Agent: Sends the SMS requested to the phone number of the CS-LT-2G / CS-4G. CS-LT-2G / CS-4G: Receive the request from the JR-Log-MCP. CS-LT-2G / CS-4G: establish a bidirectional communication from the alarm central to the établit Com2log Vmodem Server. Com2log Vmodem Server: receive the connexion from the CS-LT-2G / CS-4G. From there, the bidirectional connection is established between the alarm central of the user and the bidirectional software of the brand of the control panel

10 C/ Rosselló E Barcelona, España Telf Fax