Välkommen/Welcome – who ever concerned… High quality press brakes, guillotine shears and special hydraulic presses! 1

Group structure effective per 31 December 2013 Sentica Growth Fund II Finnish Industry Investment Etera Management 53% 25% 13% 9% Ursviken Group Oy 100% 100% 100% Ursviken Management AB Ursviken Holding AB Growth Fund Oy 100% 100% Kantpressen 1 AB Pivatic Oy Ursviken Technology AB Pivatic Varikko Oy 100% Ursviken Inc. Illinois, USA Strictly private and confidential

Press Brakes – OptiFlex 100 ton 2,1 meter – 320 ton 6,1 meter

Press Brakes – OptiFlex, robot assisted Robot assisted press brake Press power 200 ton Bending length 5.1m Bending panels and lists. Short side in wing bender in robot Specially equipped with tool changer, including both upper and lower tool Built for very thin material, e g 0,8 mm aluminum Tool system Tool systems 4

Press Brakes – Tandem Optima Press power 1,250 tons per machine, 2,500 tons in total Bending length 2 x 8.4m, 16.8m in total In-feed equipment from front of the machine Out feeder mounted in die tool (goes to the left) Front and back gauges Chinese customer Machine is used for manufacturing of poles, both mutli-sided and round poles 5

Press Brakes – Optima OPTIMA Optima 2,000 tons 12.2 metres and Both machines with VDT 40-260 9 axis back gauges Flexicrown Manual supports on front side Customer – job shop with various production

Press Brakes – Optima, during design phase… 7

… and during assembly Optima Press power of 3,000 tons Bending length 18.4m VDT 32-200 Flexicrown 7 heavy duty lift-and swings Front gauges with straightening function Back gauges 9 axis In total 24 CNC axis Delivered in 2004 Machine value at delivery approx. EUR 3m 8

Press Brake Tandem Optima Press power of 2*2.200 ton Bending length 18,4 meters Extractor to push 10 ton 9

Press Brakes – in design phase 10

Press Brakes – ready for delivery Optima Press power: 4000 tons Bending length: 14.5m Stroke in ram: 1,500mm Daylight: 4,000mm Gap in frames: 1,600mm Total height above floor: 9m Height of frames: 14.5m VDT: 70-390mm Front and back gauges Tool rack, CNC controlled Max upper tool radius ordered: 250mm Worlds biggest…? 11

Press Brakes – in design phase Optima – Tandem 2 x 5,000 tons, 2 x 6.5m

Press Brakes – in installation phase OPTIMA Tandem 2 x 5,000 tons Bending length 2 x 6.5m

Optional equipment – control system Cybelec control B&R control for Flexicrown Cyblec control system for tandem B&R for control of automated positioning of plates 14

Optional equipment – tool clamping Ursviken std, 13 mm or 1/2 inch With lifting device and rollers for heavy tool holder or tools. 175 mm width inside Ursviken 28 mm with rollers A “real heavy clamp” material weight 1 ton each 15

Optional equipment – Variable die tool Variable CNC die tool Die opening 40-260mm 16

Optional equipment – Variable die tool Variable CNC die tool Die opening 50-370mm 17

Optional equipment – Lift and swing CNC controlled lift and swing, size II 18

Optional equipment – 6 axis back gauges Size I: Optiflex Size II: Rec to 320-640 tons Size III: Rec to 640-1250 tons Size IV: Rec to 800-2000 ton 19

Optional equipment – Back gauges Stroke 2500 mm Straightening function Stroke up to 5 meters delivered, now designing 11 meters! Different solutions of the “head” and fingers 20

Ship building, SBRP 400 ton

Winding press Presses transformer Windings (presses the windings together to make them tight) Made for 250 and 400 tons power Diameter up to 4 meters 22

Pipe calibration press – Installed Press power of 12,000 tons

Customer products – Poles & Pipes Light pole and power transportation produced in a tandem press brake 2 x 1,250 tons 2 x 8.4m Machine both for round poles and for multi-sided poles 36 meter high pole with a diameter of 1.5m Pipes for oil and gas industry; material 70 mm and length 12 m

Customer products – mobile cranes Arms are made in press brakes Customer in China Leading Chinese crane manufacturer – makes cranes up to 500 tons, all arms are made in Ursviken machines Volume of 1,500 vehicles a month

Customer products – Selected end-products

Ursviken customer range From small companies, like Ume-Trailer in north of Sweden… ...to big ones, like Hyundai Heavy Industries of Korea

Ursviken customer range