DCN Remote control facilities LBB3500/05 Stand Alone: no remote control facility available LBB3500/15 Stand Alone: with remote control facility LBB3500/15 /35 with PC Control & remote control facility 09.12.2004 DCN Remote Control Panels

CCU’s comport for Open Interface connection System Installation Microphone management Voting Attendance Registration Intercom Message Distribution LBB 3587 for opening Open Interface RS 232 09.12.2004 DCN Remote Control Panels

Control panel and standard hardware Touch panel and interface box + custom made software For the Chairman and Operators 09.12.2004 DCN Remote Control Panels

Custom made SW for controlling DCN Assigning applications Microphone control and mode selection Voting control and showing results Activating Attendance Registration 09.12.2004 DCN Remote Control Panels

Page for selecting DCN voting modes 09.12.2004 DCN Remote Control Panels

Control equipment from AMX & Crestron www.amx.com www.crestron.com 09.12.2004 DCN Remote Control Panels

How to handle Bosch Security Systems BV is not supplying touch screen equipment. Contact AMX or Crestron dealer locally. React proactive. Select the dealer which has experience and is dealer for Bosch and AMX or Crestron. 09.12.2004 DCN Remote Control Panels

JACOMIC 200 Remote control system for DCN microphones 09.12.2004 DCN Remote Control Panels

JACOMIC 200 Remote control system for DCN microphones 09.12.2004 DCN Remote Control Panels

JACOMIC 200 Remote control system for DCN microphones System description: Remote control for a maximum of 192 DCN microphones. The available control modes are: Request list, technician only Request list, technician and delegates First in first out, technician only First in first out, technician and delegates Open, technician and delegates Voice operated Maximal number of activated microphones is 1, 2 or 4. Microphone control with an individual switch for each microphone Microphone status presented by two individual LEDS for each microphone Next microphone switch for use with the request list and the first in first out modus 09.12.2004 DCN Remote Control Panels

JACOMIC 200 Remote control system for DCN microphones COMPONENTS JACOMIC 200 Microprocessor board JACOMIC 200 / controller Switch and LED matrix for set up and control incl. flat cable JACOMIC 200 / Tsw4 Switch and LED matrix for control of 64 mic. incl. flat cable JACOMIC 200 / Msw Interface for Switch and LED matrix incl. flat cable JACOMIC 200 / int64 Data cable with a DCN power interface, length 5 metre JACOMIC 200 / 232ps Data extension cable 5 metre JACOMIC 200 / 232dext 5 Data extension cable 10 metre JACOMIC 200 / 232dext 10 Flush-Mounted panel for Tsw and 1* Msw64 JACOMIC 200 / fmp 64 Flush-Mounted panel for Tsw and 2* Msw64 JACOMIC 200 / fmp128 Flush-mounted panel for Tsw and 3* Msw64 JACOMIC 200 / fmp 92 Desktop console 64 microphones JACOMIC 200 / desk 64 Desktop console 128 microphones JACOMIC 200 / desk128 Desktop console 192 microphones JACOMIC 200 / desk192 Customer design control panel JACOMIC 200 / special** Open Interface Software Philips LBB3587/** LBB3587/** 09.12.2004 DCN Remote Control Panels

JACOMIC 200 Remote control system for DCN microphones Basic system for 64 microphones JACOMIC 200 / basic 64 The basic 64 system consists of the assembled items: 1 Micro processor board JACOMIC 200 / controller 1 Switch and LED matrix for setup and control, incl. flat cable JACOMIC 200 / Tsw 1 Switch and LED matrix for control of 64 mic, incl. flat cable JACOMIC 200 / Msw64 2 Interface for Switch and LED matrix, incl. flat cable JACOMIC 200 / int64 1 Data cable with DCN power interface, length 5 metre JACOMIC 200 / 232ps 1 Flush-Mounted RVS panel for Tsw and one Msw64 JACOMIC 200 / fmp 1 Desktop console 64 microphones JACOMIC 200 / desk64 0 Open Interface Software Philips LBB3587/00 ver ** not included! System requirements: The DCN-CCU must be the LBB3500/10 /15 /30 /35 The DCN-CCU LBB3500/10, must be enabled by the Philips open interface software. The software version of the LBB3587/00 ** must be compatible with the LBB3500/xx software version! The maximal length between the JACOMIC 200 system and the LBB3500/10 is 25 metres. The dimension of the cupboard for the 64 microphones is 300 by 200 mm. 09.12.2004 DCN Remote Control Panels

Documents available Doc’s about controllable applications and functions (GD) General Remote Interface Description (SCI) System Configuration & Installation (MM) Microphone Management (PV) Parliamentary Voting (AT) Attendance Registration (IC) Intercom (MD) Message Distribution DDTK toolkit Application note 09.12.2004 DCN Remote Control Panels

DCN Remote control facilities End of section  Robert Bosch GmbH All rights are reserved. Reproduction or passing on to third parties in whole or in parts is prohibited without the written consent of the copyright owner. 09.12.2004 DCN Remote Control Panels