4 shelf shoe rack assembly instructions 3 shelf uses same principals

You are starting with the top and working your way down to the bottom. So take the top and lay it upside down on a towel or a soft surface. Take the two pre assembled handles and from the top side pass them through the holes so the connectors protrude. Step 1

Add a coupling + 6” pipe to all 4 corners to lock the first shelf in Add a coupling + 6” pipe to all 4 corners to lock the first shelf in. Hand tighten for now and you can always use a wrench later if you want the couplings tighter . Then add a coupling + 1 ½” pipe to all 4 corners to hold the next shelf which is shelf #2 from the top when you flip it over. Step 2

Fit the second shelf between the 1 ½” pipes on all four corners Fit the second shelf between the 1 ½” pipes on all four corners. Don’t worry if you have to pull a bit on the pipe to match the holes. Once done lock the four corners in with four couplings, then repeat the previous step for the next two shelves in the exact same way. Step 3

Step 4 Follow instructions from step 3 for shelf #3

Step 5 Do the exact same thing as step 3 and 4 but now you are only adding the coupling to lock in the bottom shelf and then a 4” pipe on all four corners.

Step 6 Your almost done. Loosly put on the 4 flanges to the bottom of the 4” pipe for the feet. You are putting it on loosely as this is what will be used to level the piece to your particular floor as there is about ½” of play on all 4 corners 

Step 7 Flip it over and admire your work 