BRACKET 1. CHANGE TO METRIC UNITS 2. TOP PLANE SKETCH AS SHOWN CHANGE TO METRIC (MMGS) FOR ALL PART DRAWINGS 1. CHANGE TO METRIC UNITS 2. TOP PLANE SKETCH AS SHOWN 3. SKETCH AS SHOWN
LINES TANGENT TO THE CIRCLE - LOOK FOR TANGENT SYMBOLS 4. SKETCH AS SHOWN 5. TRIM 6. EXTRUDE BOSS/BASE 12.00mm
7. SKETCH ON TOP SURFACE 8. EXTRUDE BOSS/BASE 20.00mm 9. NEW SKETCH ON SURFACE CIRCLE Ø36 10. EXTRUDE BOSS/BASE 12.00mm
11. NEW SKETCH ON SURFACE 12. EXTRUDED CUT 12mm 13. REPEAT FOR OTHER SIDE 14. FILLET 3mm
SWEPT-CUT THREADS 17. FEATURES TAB CURVES HELIX AND SPIRAL SETTINGS 15. NEW SKETCH ON SURFACE 16. REGENERATE 20. FEATURES TAB REFERENCE GEOMETRY PLANE 21. CLICK THE HELIX CLICK THE END OF THE HELIX 19. REGENERATE
22. NEW SKETCH ON PLANE1 23. REGENERATE 24. SWEPT CUT 25. SELECT THE PROFILE (TRIANGLE) SELECT THE PATH (HELIX) 26. HIDE HELIX LINE EYE BALL 27. REPEAT FOR OTHER SIDE
PLACE DIMENSIONS EXACTLY WHERE SHOWN BELOW *REPLACE # WITH ACTUAL DIMENSIONS* NUMBER DRAWINGS AS SHOWN