Kevin Boyce Director of Product Management, LED Drivers PW Linear LED Drivers Kevin Boyce Director of Product Management, LED Drivers

PW Drivers PW PWX Programmable Features INTERNAL ONLY Programmable Wireless Programming Programmable Wireless Programming X Auxiliary Output with <0.5W Standby Power Programmable Features Output Current – programmable down to 100mA output current Dimming Level – programmable below 1% of maximum output current to provide relative 1% dimming of tuned current Dimming Curve – programmable to Linear, Linear Soft Start or Logarithmic Dimming Control Voltage – Dim-to-off, minimum dimming and maximum dim control voltages Lumen Maintenance – programmable to increase the output current over a period of time up to 100,000 hours Programming Solution PW Drivers LDPC000A Configuration Tool EVERset Programming Software INTERNAL ONLY

PW Linear LED Drivers Programmable LED Drivers 120-277V Input Voltage 20/30/55/80W Drivers C-Can (including 80W) Class P / UL Listed Class 2, Constant Current Output 0-10V Dimming with relative 1% dimming Class 1 and Class 2 Control Wiring RFID Programming Full Featured Programming Output Current Minimum Dimming Current Dim-to-Off Dimming Curve Type Dimming Curve Control Voltage KSP KSP KSP KSP Note: Base model ordering codes only. A made-to-order pre-tuned driver ordering process is being set up for small orders. A price premium will apply. INTERNAL ONLY

20W PW Driver 700mA Programmable LED Driver Driver Operating Range: Universal (120-277V) Input Voltage Class 2, 20W Constant Current Output RFID Programming 0-10V Dimming down to 4mA Class 1 or Class 2 Control Circuit Dim-to-Off ~2-3W Driver Standby Power UL Listed / Class P C-Can Programmable Dimming Curve KSP Driver Operating Range: KSP 1% Dim Voltage KSP Current (mA)

30W PW Driver 1050mA Programmable LED Driver Driver Operating Range: Universal (120-277V) Input Voltage Class 2, 30W Constant Current Output RFID Programming 0-10V Dimming down to 4mA Class 1 or Class 2 Control Circuit Dim-to-Off ~2-3W Driver Standby Power UL Listed / Class P C-Can Programmable Dimming Curve KSP Driver Operating Range: KSP 1% Dim Voltage KSP Current (mA)

55W PW Driver 1500mA Programmable LED Driver Driver Operating Range: Universal (120-277V) Input Voltage Class 2, 55W Constant Current Output RFID Programming 0-10V Dimming down to 5mA Class 1 or Class 2 Control Circuit Dim-to-Off ~2-3W Driver Standby Power UL Listed / Class P C-Can Programmable Dimming Curve KSP Driver Operating Range: KSP 1% Dim Voltage KSP Current (mA)

80W PW Driver 2100mA Programmable LED Driver Driver Operating Range: Universal (120-277V) Input Voltage Class 2, 80W Constant Current Output RFID Programming 0-10V Dimming down to 5mA Class 1 or Class 2 Control Circuit Dim-to-Off ~2-3W Driver Standby Power UL Listed / Class P C-Can Programmable Dimming Features KSP Driver Operating Range: KSP 1% Dim KSP Voltage KSP Current (mA)

PW Linear LED Drivers PW Key Features vs Competitive Product Feature Advantage Efficiency >87.5% at 1.05A, 45Vdc >86% at 1.05A, 45Vdc >87% at 1.05A, 45Vdc Control Wiring Class 1 or Class 2 Class 1 or Class 2 (40/54W) Class 1 only (20/75W) Minimum Dimming 1% of tuned value Min Output Current 100mA 20-30% of max Iout Output Voltage Range 16-56Vdc 10-55Vdc 22.5-54Vdc (20/40W) 27-54Vdc (54/75W) Programming Options Output Current, Dimming Curves, Dimming Values Output Current, Dimming Curves Programming Method RFID Wired Dim-to-Off Yes, 2-3W standby power No PW Series The PW series of LED Drivers is a superior offering against Philips and Osram Risks: INTERNAL ONLY

Output Current, Dimming Curves, Dimming Values PW Linear LED Drivers PW Key Features vs TZ/TW Series Feature TZ/TW Series PW Series Efficiency on 55W drivers >87.5% at 1.05A, 45Vdc >85.0% at 1.50A, 36Vdc >83.0% at 1.05A, 30Vdc >87.0% at 1.50A, 36Vdc >85.0% at 1.05A, 30Vdc Min Power for DLC on 55W drivers (PF>0.9 & THD<20%) <20W 25W Control Wiring Class 2 only Class 1 or Class 2 Minimum Dimming 1% of max output current 1% of tuned value Min Output Current 30% of max output current 100mA Output Voltage Range 15-56Vdc 16-56Vdc Programming Options Output Current Output Current, Dimming Curves, Dimming Values Programming Method Wired with no readback RFID Dim-to-Off No Yes, 2-3W standby power The PW series of LED Drivers is a superior offering to the existing TZ/TW drivers INTERNAL ONLY

Programmable Dimming Curve

Dimming Curve Linear Linear Soft Start Logarithmic - 2 Most Common dimming curve Works well with dimmers with a logarithmic response Linear dimming curve with a softer start Helps to minimize the “jump” in light output that can be seen when a dimmer is adjusted up from the minimum level Typically associated with DALI Works well with dimmers with a linear response The logarithmic base can set from 1 to 7, with larger numbers providing for a steeper curve Puts more response at the low end where light level changes are more noticeable

Dimming Curve – Control Voltage Break Points Full Bright Control Voltage Can be set from 7 to 9Vdc Minimum Dim Control Voltage Can be set from 1 to 3Vdc Dim-to-off Control Voltage Can be set from 0.1 to 1.7Vdc Must be set at least 0.2V below minimum dim control voltage Prevents the driver from cycling between dim-to-off and minimum dim voltage when there are small fluctuations in the dimming signal

Dimming Profiles Example – Replacement Luminaire Profile Output Current 900mA Min Dim Current 45mA Dimming Curve Linear Max Bright Control Voltage 8Vdc Min Dim Control Voltage 1Vdc Dim-to-off Control Voltage disabled Example – New Luminaire Profile Output Current 900mA Min Dim Current 9mA Dimming Curve Logarithmic - 1 Max Bright Control Voltage 9Vdc Min Dim Control Voltage 1Vdc Dim-to-off Control Voltage 0.5Vdc Adjustment of the dimming curve break points and dim-to-off allow for a customized dimming profile to be configured for a luminaire.

Lumen Maintenance

Lumen Maintenance Lumen Maintenance Lumen Maintenance – used to increase the output current to LEDs overtime to offset the lumen losses associated with LED degradation over time. Lumen Maintenance Factory defaults to disabled, must be enabled to use Output Current (Final) is linked to the Output Current on the main tab Driver will slowly increase the output current linearly over the lumen compensation period

Lumen Maintenance Output Current (Initial) Can be set to 50% of the final output current This is the output current provided by the driver at initial installation Output Current (Final) This is linked to the output current on the main tab This is the output current provided by the driver after the lumen compensation period Lumen Compensation Period This is the amount of time over which the driver will linearly increase the output current Can be set from 0 to 100,000 hours in 4 hour increments Calculated value in EVERset reflecting the increase of the Output Current (Final) over the Output Current (Initial)

EVERset Programming Software

EVERset Programming Software Programming Solution PW Drivers LDPC000A Configuration Tool EVERset Programming Software EVERset Programming Software Version 1.2.0 is available now Contains the 55W PW Driver Update database option can be used to get the 20W, 30W and 80W PW Drivers https://unvlt.com/support/led-driver-tuning/ Version 1.3.0 is under development Will include PW and PWX linear drivers in default file Minor feature enhancements and bug fixes Planned availability July

Marketing Resources The formal launch e-blast was sent out May 31st Feel free to forward the e-blast to your customers. Collateral PDFs available on www.unvlt.com. Product Flyer Spec Sheets To support the launch of the new drivers, these tactics (among others) will be in play… LED Selector Guide Linear Driver & Modules Brochure Press Release Social Media Blueprint/PESLA Newsletters Presentation Library

Questions? INTERNAL ONLY