Multi-Gear Tire Lock

Outline Background Product Introduction Installation

Background Tires are one of the most important component for vehicle. In recent years, because the cost of material has raised up rapidly and the tires can easily be stolen and resold, the rate of losing tires becomes higher and higher. In such cases, DEFEND GROUP develops a brand new product, which can prevent the tires from being stolen

Product Introduction Use the combination of gears, which is hard for thieves to crack The tire lock has multiple combinations structure After installing, there will be 2 parts Lock body  Installed on the tires Gear-key  The lock body can’t be unlocked without the gear-key

Product Introduction Spec. of Tire Lock Features Specification Unit Material Stainless Steel 420J2 - Type Screw nut Screw bolt SET Pitch M12x1.25 M12*1.50 mm Diameter 30 Lock body 63 g Cover 6.07 Gear-key 70 Surface treatment Chromium plating

Product Introduction Tire Lock Diagram Lock Body Gear-Key

Installation 1. Use the socket wrench to slacken the original nut

Installation 2. Roll in the lock body

Installation 3. Use the gear-key and 21mm socket wrench to tight up the lock body

Installation 4.Use gear-key (bottom) to tight up the dust cover

Installation 5. Done

Thanks for your attention