<September, 2010> Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [Resolution of TG6 Draft D0 comments S7-255, S7-257, S7-258 and S7-259] Date Submitted: [9 September, 2010] Source: [Ranjeet Kumar Patro] Company [Samsung Electronics] Address [Bagmane Lakeview, Block ´B´, No. 66/1, Bagmane Tech Park, C.V. Raman Nagar, Byrasandra, Bangalore, Karnataka, 560093, India] Voice:[+91 80 4181 9999], FAX: [+91 80 4181 9999], E-Mail:[rkp.atd@samsung.com] Re: [Proposed Resolution of D0 Comments S7-255, S7-257, S7-258 and S7-259] Abstract: [Description of document contents.] Purpose: [Description of what the author wants P802.15 to do with the information in the document.] Notice: This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P802.15. NOTE: Update all red fields replacing with your information; they are required. This is a manual update in appropriate fields. All Blue fields are informational and are to be deleted. Black stays. After updating delete this box/paragraph. <Ranjeet Kumar Patro>, <Samsung Electronics>

Proposed Resolution of D0 Comments: S7-255, S7-257, S7-258 and S7-259 <month year> doc.: IEEE 802.15-<doc#> <September, 2010> Proposed Resolution of D0 Comments: S7-255, S7-257, S7-258 and S7-259 <Ranjeet Kumar Patro>, <Samsung Electronics> <author>, <company>

D0 Comments: S7-255, S7-257, S7-258 and S7-259 <month year> doc.: IEEE 802.15-<doc#> <September, 2010> D0 Comments: S7-255, S7-257, S7-258 and S7-259 Comment: MAC sublayer parameters “mEDScanDuration, mActiveScanDuration, mNetworkActivityDuration, mPassiveScanDuration” shown in text are not defined or present in Table 23. Commentators proposed resolution: Define “mEDScanDuration, mActiveScanDuration, mNetworkActivityDuration, mPassiveScanDuration” as MAC sublayer parameters in Table 23 Must be satisfied: Yes <Ranjeet Kumar Patro>, <Samsung Electronics> <author>, <company>

doc.: IEEE 802.15-<doc#> <month year> doc.: IEEE 802.15-<doc#> <September, 2010> Proposed Resolution Resolution: Accept in principle. The “mEDScanDuration, mActiveScanDuration, mNetworkActivityDuration, mPassiveScanDuration” are not MAC parameters. These parameters are generated by the next higher layer and issued to the MAC layer. Remove ‘m’ from “mEDScanDuration, mActiveScanDuration, mNetworkActivityDuration, mPassiveScanDuration”. Create a separate table for the parameters specified by the next higher layer. <Ranjeet Kumar Patro>, <Samsung Electronics> <author>, <company>