Presented By,  Mamata Yadav (BE Elex & Comm.) Vice R&D Coordinator(HW), PCRT  Payal Shah (BE Elex & Comm.)  Ananta Das (BE Elex & Comm.) R&D Team,PCRT GETTING STARTED WITH ARDUINO PLATFORM

HELLO EVERYONE WELCOME TO THE ARDUINO PLATFORM

CONTENT : History Introduction Types Structure of the program Simple project in Proteus through Arduino Demonstration of Arduino Project

MICRO-CONTROLLER: It is a micro-computer. As any computer it has internal CPU, RAM, IOs interface. It is used for control purposes, and for data analysis. Famous microcontroller manufacturers are Microchip, Atmel, Intel, Analog devices, and more.

ARDUINO HISTORY TEAM NAME: Created in Ivrea, Italy in 2003 Contains Atmel processor 8 bit microcontroller

HISTORY The origin of the Arduino project started at the Interaction Design Institute Ivrea (IDII) in Ivrea, Italy In 2003,Massimo Banzi with David Cuartielles, added support for cheaper ATmega8 Microcontroller to Wiring

open source Hardware+Software Resource-On

OPEN SOURCE (HARDWARE + SOFTWARE) - Source code available to anyone - Can modify from its original design - Components & its detail is public - reproduce product without any copyright - Example: arduino, android, Linux etc ARDUINO is the best example

WHY ARDUINO? - Inexpensive - Cross platform - Simple clear programming environment - High level programming language - Open source hardware & software

ARDUINO BOARDS: UNOMegaLilyPad Arduino MICROArduino NanoArduino Mini

FEATURE S Arduino UNOArduino Mega MicrocontrollerATmega328P Operating Voltage5V Input Voltage (limit) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins6 DC Current per I/O Pin 20 mA Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM2 KB (ATmega328P) EEPROM1 KB (ATmega328P) Clock Speed16 MHz MicrocontrollerATmega2560 Operating Voltage5V Digital I/O Pins54 (of which 15 provide PWM output) Analog Input Pins16 DC Current per I/O Pin20 mA Flash Memory256 KB of which 8 KB used by bootloader SRAM8 KB EEPROM4 KB Clock Speed16 MHz

SCHEMATIC DIAGRAM OF ARDUINO

Input / Output Input

Input/ Output devices of Arduino

What to do ?? How to do?? Where to do??

These things + Driver software

ARDUINO IDE(INTEGRATED DEVELOPMENT ENVIRONMENT)

SELECT BOARD

SELECT PORT

Structure of the program

void setup() { pinMode(13, OUTPUT); } void loop() { digitalWrite(13, HIGH); delay(1000); digitalWrite(13, LOW); delay(1000); } BLINK CODE IN ARDUINO

Serial monitor To initialize serial communication with specified baud rate printf() in c programming printf(“ \n”) Serial.begin(9600); Serial.print( ); Serial.println( );

Almost all Arduino have built in LED in its pin no.13

using Arduino

What if we don’t have an Arduino with us?? Install Proteus Add Arduino library to Proteus

THANKS