REESS mechanical integrity test structure RESS-6-14 REESS mechanical integrity test structure Abteilung Titel der Präsentation, CorpoS, Bold (10pt), Datum

REESS mechanical integrity test 6.4.2.1 Vehicle based test 6.4.2.1.1Vehicle based dynamic test Crash test acc. ECE-R94/95 6.4.2.1.2Vehicle based static test - static test using contact force acc. ECE-R94/95 - using vehicle structure No vehicle installation limitations allowed v vehicle Abteilung Titel der Präsentation, CorpoS, Bold (10pt), Datum

REESS mechanical integrity test 6.4.2.1 Vehicle based test 6.4.2.1 Component based test 6.4.2.1.1Vehicle based dynamic test Crash test acc. ECE-R94/95 REESS Fmax= 100 kN x y 6.4.2.1.2Vehicle based static test - static test using contact force acc. ECE-R94/95 - using vehicle structure No vehicle installation limitations Vehicle installation limitations 420mm 300mm not allowed Allowed (100 kN) v allowed v vehicle Abteilung Titel der Präsentation, CorpoS, Bold (10pt), Datum

REESS mechanical integrity test 6.4.2.1 Vehicle based test 6.4.2.1 Component based test 6.4.2.1 Component based test “safety zone” 6.4.2.1.1Vehicle based dynamic test Crash test acc. ECE-R94/95 REESS Fmax= 100 kN x y No contact force (inertial load only) 6.4.2.1.2Vehicle based static test - static test using contact force acc. ECE-R94/95 - using vehicle structure No vehicle installation limitations Vehicle installation limitations Vehicle installation limitations 420mm 300mm not allowed Allowed (100 kN) v 420mm 300mm not allowed v 0 kN allowed v vehicle Abteilung Titel der Präsentation, CorpoS, Bold (10pt), Datum

Component based integrity test REESS mechanical integrity test Component based integrity test Definition of « Forbidden Zone » & « Safe Zone » 420 mm 300 mm Front R Point 200 mm Rear 200 mm 400 mm 400 mm 600 mm Chassis frame Abteilung Titel der Präsentation, CorpoS, Bold (10pt), Datum