Solid inner shelf/brace isolates midrange and tweeter from woofers Speaker Components List and Dimensions Dayton Audio DC25T-8 1" Titanium Dome Tweeter Part # 275-045 Dayton Audio RS125-8 5" Reference Woofer Part # 295-353 930064 8" Heavy Duty Woofer with Rubber Surround 4 Ohm Part # 299-363 Square Speaker Terminal Cup 4" Gold Banana Binding Post Part # 260-284 Speaker Cabinet Port Tube 2-1/2" ID x 8-1/2" L Flared Part # 260-478(cut for tuning) Crossover Audiopipe model CRX-3005KHP with crossovers of 675Hz and 5000Hz w/fused drivers Specification values are approximate Frequency response: 38Hz – 20kHz Sensitivity 89dB Crossover: 625Hz/5000Hz Input impedance: 8 ohms Power rating: 160 watts Dimensions: 40”H x 11”W x 14”D 3D front Rear side 4” 1 3” cutout Solid inner shelf/brace isolates midrange and tweeter from woofers 16” 10” 2 4” cutout 20” 19” 7 3 Speaker connections + - 40” 3” cutout 5 0.25” wire feed hole 24” 29” 7.125” cutout 4 36.5” 3.75” cutout 6 tuned port cut to 4.5” Internal brace 11” 14” cutout cutout

Wiring Schematic - Crossover Network 3-way, 2nd Order (12dB) Reverse Polarity 625 Hz/ 5000 Hz 8 Ohm Tweeter/8 Ohm Midrange/8 Ohm Woofer Bandpass Gain ~ 2.5 dB Spread ~3 octaves Components List Metalized film capacitors C1 = 2.0 uF C2 = 20.0 – 22.0 uF C3 = 2.0 uF C4 = 15.0 – 16.0 uF Inductors L1 = 0.50 mH L2 = 4.0 mH L3 = 0.40 mH L4 = 4.0 mH fuse C1 Input (8 ohm) Tweeter (8 ohm) L1 fuse L3 C2 Midrange (8 ohm) L2 C3 fuse L4 C4 Woofers (4 ohm each in series)

Solid inner shelf/brace isolates midrange and tweeter from woofers Speaker Cabinet Dimensions and Cutouts OD = 40 inches tall x 11 inches wide x 14 inches deep Wood thickness = ¾ inches 3D view Front Rear Side From top 4” on center From top 3” dia. cutout Solid inner shelf/brace isolates midrange and tweeter from woofers Shelf/brace 16” on center 10” on center 3”dia. cutout 4” dia. cutout From top 20” on center Solid shelf crossover Input + - 40” tall 19” on center 0.25” wire feed hole From top Brace 24” on center 7.125” dia. cutouts brace 3.75”dia. cutout 29” on center 36.5” on center tuned port cut to 4.5” Internal brace 11” wide 14” deep cutout cutout

Features Heavily braced cabinets Midrange and tweeter are isolated from the woofers High density acoustic dampening material Rear mounted flared tuned port Crossover design utilizes: all precision metalized film capacitors in both the midrange and tweeter signal path as well as the low pass signal path both air core and iron core copper wound inductors all driver paths are individually fused Gold plated banana binding posts All connections to binding posts and drivers are soldered