GRP data for online/offline data processing 28/06/2019, R.Shahoyan for O2-PDP

Same data records as in Run2 will be needed to be stored in CCDB: LHC_Beam_Energy BPTX_Phase_B1 LHC_IntensityBeam1_totalIntensity BPTX_PhaseRMS_B1 LHC_IntensityBeam2_totalIntensity BPTX_Phase_Shift_B1 LHC_MachineMode BPTX_Phase_B2 LHC_BeamMode BPTX_PhaseRMS_B2 LHC_Beams_Particle_Type BPTX_Phase_Shift_B2 LHC_FillNumber LHC_Particle_Type_B1 LHC_BunchLengthBeam1_filledBuckets LHC_Particle_Type_B2 LHC_BunchLengthBeam2_filledBuckets LHC_Data_Quality_Flag LHC_RunControl_BetaStar ALI_Lumi_Total_Inst LHC_RunControl_ActiveInjectionScheme ALI_Lumi_Total_Delivered_StabBeam LHC_CollimatorPos_TCLIA_4R2_lvdt_gap_downstream ALI_Lumi_Bunch_Inst LHC_CollimatorPos_TCLIA_4R2_lvdt_gap_upstream ALI_Background1 LHC_CollimatorPos_TCLIA_4R2_lvdt_left_downstream ALI_Background2 LHC_CollimatorPos_TCLIA_4R2_lvdt_left_upstream ALI_Background3 LHC_CollimatorPos_TCLIA_4R2_lvdt_right_downstream ALI_Lumi_Source_Name LHC_CollimatorPos_TCLIA_4R2_lvdt_right_upstream LHC_BetaStar_TargetOptic LHC_CirculatingBunchConfig_Beam1 LHC_BetaStar_Active LHC_CirculatingBunchConfig_Beam2 LHC_BeamIntensityPerBunchBeam1_Average_BunchIntensities LHC_BeamIntensityPerBunchBeam2_Average_BunchIntensities BPTX_deltaT_B1_B2 BPTX_deltaTRMS_B1_B2

Highlighted records are needed for (online) reconstruction → should be available (via DCS?) from the very beginning of the run, together with magnets currents settings. These are all configuration parameters, known from the start of STABLE_BEAM, exception is ALI_Lumi_Total_Inst (in Run2 was provided averaged within 60s). In Run2 reconstruction Inst. Luminosity was extracted from the CTP scalers, need to discuss with CTP experts in which form it will be available). No particular preference for data communication channel, but preferable to have the same mechanism for configuration and measured/processed data (DCS?)