The 5-year Integrated Plan is built upon this logic diagram Target Fabrication and Injection Logic Flow Preliminary Target Designs specified Target design Work (NRL) Foam shells for Direct Drive The 5-year Integrated Plan is built upon this logic diagram Characterization Of Foam Shells Gold Overcoat for Rad Preheat Target Demonstrate Integrated Fill, Layer and Thermal Exposure Fabricate Single Prototype Direct Drive Target Decision on Baseline Direct Drive Target Demonstrate Pilot-Scale Shell Production Fluidized Bed Mass Production Target Fabrication Tasks Foam Shell Mass Production Mass Production Layering Methods Fill/Injector Demonstration Low inventory Filling methods Cryogenic Target Handling Target Thermal Response Target Thermal Response Engineering Design of Cryo Injector Fill system Demo Target Injection Tasks Target Injection Accuracy & Track Target Injection Accuracy & Track Target Property Measurements Target Property Measurements Electromagnetic Accelerator Electromagnetic Accelerator Demonstrate Tracking Accuracy Target Fab, Fil And Injection Demonstrated and ready for IRE Experimental Injector Design Experimental Injector Design Tracking Accuracy Demonstrated

Summary of LANL/GA target injection tasks

3.6.1 Coordinate target tasks with other IFE components Overall Purpose: Participate in and host workshops for cross-communication; address action items, follow-up with technical evaluations - $75K GA has hosted previous workshops to facilitate communication between target designers, target fabricators, target injection, chamber design, and safety/environmental issues Deliverable: Document discussions, conclusions, and action items in workshop summaries