PIR Insulation to achieve required

Slides:

Advertisements

Similar presentations

We’re serious about… Sound Proofing. We’re serious about… Double Separated Walls Sound Proofing.

Advertisements

Copyright , Facade Works Inc - Drained/Back-Ventilated Rain Screen System.

Fibre Volume Fraction and Laminate Thickness

S2 Glass Insulation Hexcel Corporation S2 Fiberglass Cloth #4522 with F81 Silane Finish. 30” (0.762 m) wide roll, 125 yards long (114.3 m),.0051” (0.130.

SHOTCRETING K.V.SUBBA RAO.

33 Chairside Restorative Materials. 2 Introduction Materials are generally divided and categorized according to their functions. The American Dental Association.

Walls Ron Gatepain constructionsite.

Pulse Phase Thermography and its Application to Defects in Adhesively Bonded Joints R. C. Waugh, J. M. Dulieu-Barton and S. Quinn Faculty of Engineering.

Dental Materials Restorations, Luting and Pulp Therapy Introduction.

Bemalastic 1213 Bridge Deck Membrane

1 Design and drawing of RC Structures CV61 Dr. G.S.Suresh Civil Engineering Department The National Institute of Engineering Mysore Mob:

The Mondial Forni Mondial and Ecomondial steam tube fixed deck ovens, gas or gasoil heated, are composed of independent decks with standard working height.

Improving Energy Efficiency in Traditional Buildings Moses Jenkins Technical Conservation Group.

Leonardo da vinci project Being active in building Passive homes: 1- Walls construction, 2- Building a passive house, blower door test, 3- Solar systems,

ROOF MATE Step-By-Step Application Over MODIFIED BITUMEN ROOFING Master Guide Specifications List of materials: ROOF MATE WHITE ROOF MATE BASECOAT ROOF.

1 Attic thermal insulation The main issue in attic, superstructures in old districts and restoration works of roofs, is to create as much useful area as.

Repair Methods for Rendered Structures Rak Repair Methods of Structures, exercise (4 cr) Esko Sistonen.

Fibre Composite Electromagnetic Interference Shielding Materials for use in Airborne Vehicles Presented by Adrian Berghorst School of Mechanical Engineering.

Spray Painting. Primer Paint A primer is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface,

Pull-Off Adhesion Testing Presented by: David Beamish,

Man Made Board.

Chapter 16 Processes Used to Form WoodMaterials. Objectives Two basic wood forming processes: bonding and bending. Composition boards: hardboard, insulation.

CHE/ME 109 Heat Transfer in Electronics LECTURE 5 – GENERAL HEAT CONDUCTION EQUATION.

Energy Conservation in the roof structure. Energy conservation Conservation of energy within a roof structure can be at two different positions i.e. Ceiling.

Chapter 35 Section Layout.

Insulated rendering systems General Principles of Thermal Insulation.

ICARUS Cold Vessels Thermal insulation Project progress report.

Composites Learning Intention: Show an understanding of the term composite Be aware of practical applications of some composites.

CERN SPD meeting, 4/06/2002V. Manzari for Bari SPD-Group1 Half-stave assembly Gluing procedure & glue characteristics Status of dummy components.

Solar Gain The ultimate free lunch!. Some Basics Why do we need to heat our homes? –Living rooms21 o C –Bedrooms18 o C –Staircases & halls16 o C.

Unit 6: Building Technology in Construction Learning Outcome Understand the techniques used in the construction of superstructures for low-rise domestic.

Unit 6: Building Technology in Construction Learning Outcome Understand the techniques used in the construction of superstructures for low-rise domestic.

Building Resource Inc. Sustainable Durable Buildable Cost Effective

BING-TC CEN/TC88-WG6 PU boards Robert Walter 26/05/2009 BING 09/139.

2016 SUBSTRATE PREPARATIONS. SUBSTRATE PREPARATION METHODS FOR CONCRETE Very Course Profile Scabbling – Suitable for very aged, weak or contaminated substrates.

The reading is 7.38 mm. The reading is 7.72 mm.

Floor Systems and Foundation Support

Secure Resources – Gyproc Plasterboard Apply Plaster Materials to Internal Backgrounds.

Substrate Identification Floors. Principal Substrates T & G floorboards Flooring grade boards Concrete Screeded concrete Tile Backer Boards Under Floor/Under.

SURESTEP ORIGINAL COMPACT SHEETING.

Superconductng cable for CBM magnet

High Order correctors coil manufacturing

SANDWICH CONSTRUCTION

Table 1. Configurations of the building

AQA GCSE 5 Composite materials and technical textiles

Fibre-reinforced plastic

Secure Resources – Gyproc Plasterboard

Thermosetting Plastics

نتعارف لنتألف في التعارف تألف (( الأرواح جنود مجندة , ماتعارف منها أئتلف , وماتنافر منها اختلف )) نماذج من العبارات الايجابية.

Secure resources – gyproc plasterboard

CHAPTER SIX 2009 IRC WALL CONSTRUCTION.

Materials Training Board Section 11/18/2018.

Corticeira Amorim Ind SA

Place the USDA grade for the exterior egg shell quality of each egg.

Introduction to Weber Tile Fixing Products.

Gyproc thermaline pir Keeping the warmth within; creating energy efficient homes.

PolyIsocyanuRate PIR stands for: What is PIR?

Expanded metal lath.

Schedules of Reinforcement

I PRO' -.._ r.. f FOLLOW I 0.

Prime Factorization Practice

Direct Bond – Dry Lining to Masonry Backgrounds

Product Model Black Cloth Duct Tape Fixmart Data Sheet V01

PIR Insulation to achieve required

New 18mm thick plywood laid on top of existing timber deck.

Existing deck/substrate prepared and primed in strict accordance with LIQUIFLEX Project Specification PROVAP S/A Vapour Control Layer (where required)

Existing deck/substrate prepared and primed in strict accordance with LIQUIFLEX Project Specification PROVAP Self Adhesive Vapour Control Layer (where.

Existing deck/substrate prepared and primed in strict accordance with LIQUIFLEX Project Specification PROVAP S/A Vapour Control Layer (where required)

Presentation transcript:

PIR Insulation to achieve required Existing deck/substrate prepared and primed in strict accordance with LIQUIFLEX Project Specification PROVAP S/A Vapour Control Layer (where required) applied in strict accordance with LIQUIFLEX Project Specification PIR Insulation bonded in strict accordance with LIQUIFLEX Project Specification PROVAP S/A Carrier Membrane applied in strict accordance with LIQUIFLEX Project Specification LIQUIFLEX-PRO fully reinforced with LIQUIMAT glass fibre matting applied in strict accordance with LIQUIFLEX Project Specification LIQUITOP applied in strict accordance with LIQUIFLEX Project Specification Minimum 18mm thick exterior grade plywood fixed to parapet, prepared and primed Type-C Decotrim mechanically fixed with specified LIQUIFLEX PRO fixings or fully bonded with specified LIQUIFLEX PRO Adhesive PIR Insulation to achieve required U/Value