Pneumatic tools IR Range Overview Welcome remarks TBD. 01/12/06

Construction pneumatic tools Paving breakers Vertically down demolition Pick hammers Horizontal and downward demolition Chipping hammers All position demolition + Surface work Jackhammers Hole drilling in rock and concrete

Paving breakers Vertically down demolition works All paving breakers are available with or without “Vibration dampening”. IR15 15 kg Light road demolition, bridge decks IR20 21 kg Germany (end 2006) IR25 25 kg Concrete and asphalt demolition IR30 30 kg IR40 40 kg Concrete demolition: Thick slabs Light Construction Utility Equipment

Paving breakers High output, low air consumption Heavy weight pistons provide the highest output in their category. Tight tolerance between piston and cylinder results into the best usage of compressed air. Direct impact on chisel means less moving parts. Distribution ring instead of plate distribution is more reliable and reduces air consumption. Vibration levels The vibration-damped (BV type) breakers from Ingersoll Rand offer some of the lowest vibration levels (at maximum output) in their categories, allowing for a longer daily usage to make your work more efficient The vibration values are measured on 3 axes according to the standard EN60745-1:2005. Light Construction Utility Equipment

Paving breakers Built-in oiler Apart from the IR15, the breakers have a built-in oiling device allowing for continuous convenient greasing of your tool. Robustness and simple maintenance Thanks to a good design and a small number of moving parts, Ingersoll Rand breakers are reliable and easy to service at a lower cost, even with limited workshop equipment. Rotating muffler The robust rubber muffler can easily be rotated without tools. This feature allows the user to choose the direction of exhaust most appropriate for the job. Moreover, thanks to the slim design of the muffler, the view to the chisel is not blocked and the hammer easily fits into the toolbox of your Ingersoll Rand portable compressor. Noise levels The efficient rubber muffler allows Ingersoll Rand breakers to comply with the EN2000/14/ED directive on permissible noise levels. Corrosion resistance Thanks to zinc-plating and phosphating, the metal surfaces of Ingersoll Rand pneumatic breakers are extremely resistant to corrosion. Light Construction Utility Equipment

Pick hammers Horizontal and downward demolition works All pick hammers are available with either latch or screw retainer IR9PS 9 kg Standard IR10PV 10 kg Vibration dampened IR12PS 12 kg IR12PV Light Construction Utility Equipment

Chipping hammers Light demolition works in all positions Surface cleaning All chipping hammers are also available as a kit with chisels. IR2PS 2.6 kg IR3PS 3.5 kg IR5PS 5 kg Light Construction Utility Equipment

Jackhammers Hole drilling in rock/concrete IR17 and IR23 exist with and without vibration dampening IR5JS 5 kg Horizontal drilling IR17 17 kg Heavy duty, low air cons. IR23 23 kg Heavy duty, high torque Light Construction Utility Equipment