Fix Epson Printer Error Code 0x91 Solution To Fix Epson Printer Error Code 0x91

The Error Code 0x91is typically seems when users are trying to turn on the Epson printer, and print a document. The error is generally cause due to sensor fault, a piece of paper is jammed, or even paper is not correctly placed irrespective of its size settings, and so on. So, if you are facing the same Error Code 0x91 on your Epson Printer, then don’t worry about it. Then here the below mention solutions will guide you in the proper way to resolve Epson Printer Error Code 0x91 easily.

STEP WISE METHOD TO FIX THIS PROBLEM Here are few simple ways work to fix Epson Error Code 0x91  Method 1:- Clear Out the Printer Counters You should try to clear out the printer counters to easily fix the issue. Follow these steps to do this task:- Turn off the printer first. Now, hold down the “Paper Source” icon, then “Paper Feed” icon, then “Select Feed” and “Cut/Eject” buttons at the same time while you turn on the printer From there, you need to navigate to the menus to easily clear out the counter section which directs to the print head motor. Now try to perform the task, and observe the issue is fixed now. If not, then go to next step.

 Method 2: Reset the Counter You can try to reset the counter. Make sure that these counters can be quite tricky as they cause printers to stop working. In order to avoid this, it’s always suggested by Epson Printer Support team to users to reset the counters first. Also, one should keep in mind that if the Epson printer goes un-serviced for a long time, then it can really break down all together. So even after you have kept the printer in reset mode, it is still recommended for users that they should go for printer servicing phase as and when needed.

IF PROBLEM STILL PERSISTS CONTACT If all the previous ways fail, then solely this selection is left for you. Call at EPSON Printer Support Number is Available 24×7 To Help Or you can mail us at ELSE YOU CAN OPEN