Fig. 2 Temperature-sensing properties of the flexible rGO/PVDF nanocomposite film. Temperature-sensing properties of the flexible rGO/PVDF nanocomposite.

Slides:



Advertisements
Similar presentations
Impaired lymphatic valve protrusion in Tie2Cre;Piezo1cKO mice.
Advertisements

Wei-Ran Huang, Zhen He, Jin-Long Wang, Jian-Wei Liu, Shu-Hong Yu 
Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.
Fig. 5 In vivo MIP imaging of lipid and protein in C. elegans.
Fig. 4 3D reconfiguration of liquid metals for electronics.
Fig. 5 MicroLED array with 3D liquid metal interconnects.
Fig. 2 Reconfiguration of liquid metals into 3D structures.
Fig. 1 Characterization of the device structure.
Fig. 1 High-resolution printing of liquid metals.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 4 Electrical properties and patterning of the stretchable PEDOT/STEC (STEC content is 45.5 wt % for all). Electrical properties and patterning of.
Fig. 2 Fluidic and electrical characteristics of the wireless optofluidic system. Fluidic and electrical characteristics of the wireless optofluidic system.
Fig. 3 Saturation velocity of BP FETs.
Fig. 5 Analytical performance of the wearable cortisol sensor.
Fig. 3 Piezoresistive e-skin with interlocked microdome arrays for simultaneous detection of static pressure and temperature. Piezoresistive e-skin with.
Fig. 1 TED design and fabrication process.
Fig. 2 Materials and designs for bioresorbable PC microcavity-based pressure and temperature sensors. Materials and designs for bioresorbable PC microcavity-based.
Fig. 5 The gate voltage dependence of IEE of the Rashba-split 2DEG between SrTiO3 and 3-UC LaAlO3. The gate voltage dependence of IEE of the Rashba-split.
Fig. 1 Device structure, typical output performance, and cytocompatibility of BD-TENG. Device structure, typical output performance, and cytocompatibility.
Fig. 1 The structure of the 3DGraphene foam.
Fig. 4 Transfer characteristics of the carristor.
Fig. 4 The performance of quasi–solid state Na-CO2 batteries with rGO-Na anodes. The performance of quasi–solid state Na-CO2 batteries with rGO-Na anodes.
Fig. 5 Wearable closed-loop HMI.
Fig. 3 Characteristics of UV and temperature sensors.
Wearable/disposable sweat-based glucose monitoring device with multistage transdermal drug delivery module by Hyunjae Lee, Changyeong Song, Yong Seok Hong,
Self-powered textile for wearable electronics by hybridizing fiber-shaped nanogenerators, solar cells, and supercapacitors by Zhen Wen, Min-Hsin Yeh, Hengyu.
Fig. 2 Plasma diagnostics with DEM analysis.
The prototype and working mechanism.
Programmable wettability on photocontrolled graphene film
Fig. 2 Gate and magnetic field dependence of the edge conduction.
Fig. 4 Structural design of an F-TENG.
Ultrahigh mobility and efficient charge injection in monolayer organic thin-film transistors on boron nitride by Daowei He, Jingsi Qiao, Linglong Zhang,
Fig. 3 In vivo monitoring of vitamin E distribution on mouse skin.
Illustration of MIS-C and the characterization of the device structure
Fig. 2 Electrical and scanning probe characterization.
Fig. 4 Piezoresistive e-skin with interlocked microdome array for simultaneous monitoring of artery pulse pressure and temperature. Piezoresistive e-skin.
Fig. 4 Giant optical chirality.
by Apoorv Shanker, Chen Li, Gun-Ho Kim, David Gidley, Kevin P
by Yan Feng, Hui Liu, and Jun Yang
Nonthrombogenic, stretchable, active multielectrode array for electroanatomical mapping by Wonryung Lee, Shingo Kobayashi, Masase Nagase, Yasutoshi Jimbo,
Dipole-like electrostatic asymmetry of gold nanorods
Fig. 2 Optimization of the sweat control and characterization of individual sensors. Optimization of the sweat control and characterization of individual.
Fig. 2 Structural design of an F-DSSC.
Illustration of optogenetic cell stimulation with OLED microarrays
Fig. 5 Piezoelectric e-skin with interlocked microdome array for dynamic touch and acoustic sound detection. Piezoelectric e-skin with interlocked microdome.
Fig. 4 Comparison of fracture toughness by three-point bending test.
Fig. 4 Perovskite-infused nanoporous thin films for LEDs.
Fig. 1 MIR photovoltaic detector based on b-AsP.
Fig. 1 Structural and electrical properties of Bi2Se3/BaFe12O19.
Fig. 5 Soft, smart contact lens for detecting glucose.
Fig. 3 MXene TLs and their attenuations.
Fig. 5 Simulation of the mechanical properties of the 3DGraphene foam in a wide temperature range down to the cryogenic region. Simulation of the mechanical.
Fig. 3 Device architecture, photovoltaic performance, and operational stability of 3D/2D bilayer PSCs. Device architecture, photovoltaic performance, and.
Fig. 4 Single-particle contact angle measurements.
Fig. 1 Ultrathin, stretchable, mechanically imperceptible, multifunctional HMI device for human and robotics. Ultrathin, stretchable, mechanically imperceptible,
Fig. 5 Distributions of cell nuclear area values and internuclear distances in the breast tumor specimens (Figs. 3 and 4), where bin interval = 8 and n.
Fig. 3 Performance of the solid wire supercapacitors of 3D graphene-CNT fiber for energy storage. Performance of the solid wire supercapacitors of 3D graphene-CNT.
Fig. 2 Physical properties and measured responses of the sensors.
Fig. 3 Supraballs and films assembled from binary 219/217nm SPs/SMPs.
Fig. 2 Supraballs and films from binary SPs.
Fig. 1 Structure and basic properties of EuTiO3 (ETO) films.
Fig. 4 Characterization and SERS spectra of tetrameric metamolecules.
Fig. 2 The working principle and electrical output modulating of BD-TENG by changing the materials of friction layers. The working principle and electrical.
Fig. 3 Rubbery strain, pressure, and temperature sensors.
Fig. 4 In situ mapping of human patient breast cancer and stroma.
Fig. 1 FETs constructed from densely packed semiconducting CNT arrays.
Fig. 5 Electrical stimulation of nerve cells powered by BD-TENG.
Fig. 2 Design and characterization of rGO-Na anode.
Fig. 2 An illustration of physical models developed to study the stability and control of pointwise printing and their experimental verification. An illustration.
Fig. 2 Printed three-axis acceleration sensor.
Presentation transcript:

Fig. 2 Temperature-sensing properties of the flexible rGO/PVDF nanocomposite film. Temperature-sensing properties of the flexible rGO/PVDF nanocomposite film. (A) Cross-sectional SEM image of the rGO/PVDF composite film with stacked GO sheets. Scale bar, 1 μm. The inset shows a photograph of a flexible and large-scale (20 × 15 cm2) rGO/PVDF composite film. (B) Current-voltage curves of 1 wt % rGO/PVDF composite films at various temperatures. (C) Relative resistance change of rGO/PVDF composite film as a function of temperature for various concentrations of rGO. (D) Detection of temperature distribution on the human palm. (Top) Schematic diagram of a sensor array, where the rGO/PVDF composite film is sandwiched between gold electrode arrays (18 × 12 pixels). (Middle) Photograph of a human hand on top of the sensor array. (Bottom) Contour mapping of electrical resistance variations for the local temperature distribution on the human palm. (E) A representative photograph and infrared (IR) camera images of water droplets with different droplet temperatures (64° to −2°C) on the e-skins. (F and H) Relative resistance (R/R0) and temperature (T) variations of the e-skins after contact with water droplets (F) above room temperature (25° to 64°C) and (H) below room temperature (−2° to 21°C). Temperature (T) change is measured by an IR camera. (G and I) Initial stages of time-domain signals in (F) and (H) showing the variation of relative resistance immediately after contact between e-skins and water droplets. The solid lines represent a fit derived from Eq. 1. Jonghwa Park et al. Sci Adv 2015;1:e1500661 Copyright © 2015, The Authors