Unity Application Generator Advance training for SCoD development

Advance training for SCoD development: Contents: Objective of the training Pre requisite for the training What is SCoD? Preparation before starting. Starting SCoD development. Flow chart for SCoD Summary

Advance training for SCoD development: Objective of the training To develop understanding of the procedure required for developing an effective SCoD Pre requisite of the training: Sufficient knowledge of the process Intermediate level of knowledge in Unity, Vejio CItect. Understanding of the UAG: we expect precipitants' have participated in Basic UAG technical training module Used to work / develop organized methodology.

Advance training for SCoD development: What is ScoD? SCoD stands for Smart Control Device. It is a blcok created in SCOD editor to allow the user of the library to instantiate the function in UAG project and generate PLC code, HMI symbol and the documentation. It contains: DFB (imported from Unity /Concept) Symbols , trends, alarms and other functions from HMI (in this case Vejio Citect. Documentation.

Advance training for SCoD development: Preparation before starting.. Define and document the function to be perfomred by the SCoD List inputs /outputs Develop methodology for Unity block How many sections, variables etc. Develop methodology of the Symbol: face plate, how many pop ups How many alarms should be there? Are trends required? Data to be exchanged between PLC <---> HMI Document WE RECOMMEND TO USE THIS DOCUMENT: this includes table of activities and related forms to list down all the required activities. SCOD.xls

Advance training for SCoD development: Flow chart for SCOD development: In unity A block has to be defined in Derived FB type Inputs /outputs and IN/OUT has to be defined taking in consideration the order of the pins. Sections has to be defined Logic should be developed. Then block must analyzed. To compile, BUILT functions has to be used. The block has to placed in side a library. Then must be exported.

Advance training for SCoD development: Flow chart for SCOD development: In VJC In Vejio Citect The library project should be opened. New Genie and Super Genies can be developed under Graphic Editor. CiCOde function should be developed accordingly. Super Genies should be INCLUDED in Genies. At the end of development of each Genie and super Genie, it should be updated and packed. The new genie can be connected to the SCoD using SCoD editor. SCoD should be committed, and library /project should be opened in Customization. It is now ready for use in UAG!!

Advance training for SCoD development: Flow chart for SCOD development: In SCoD editor The Unity block and structure should be imported Variable type should be defined Pin type should be defined Alarms should be defined: Bitfield method Direct variable method Trends should be defined Then Vejio Citect genie should be connected. SCoD should be analyzed SCoD should be committed

Summary Developing structure Develop concept of the functions to be performed by the SCoD Develop documentation . The developer should be having sufficient knowledge of the Unit /Concept and Vejio CItect.