This presentation uses a free template provided by FPPT.com

This presentation uses a free template provided by FPPT.com Wave soldering machine is not really something that a layman would be interested in. This is exactly why before we get into the details of a wave soldering machine, let us check out what exactly wave soldering machine is and how it works. The wave soldering technique is used for a large scale printed circuit boards. The name has been derived from the fact that this process passes the circuit boards to get soldered through a wave of solder. This is how a complete board is soldered within seconds.

This presentation uses a free template provided by FPPT.com The process is not only better than the manual soldering, but it is also much faster than the manual process. The wave soldering also produces joints that have a much better degree of reliability. This is what makes it perfect for the large scale PCB assembly. The wave soldering machine can also be used in PCB assembly for all sorts of requirements through mounted and surface mount components.

This presentation uses a free template provided by FPPT.com Why should you choose us for getting the wave soldering machine? One of the primary reasons to avail the wave soldering machine from us is we offer Industrial PC control System Long Lifeline. Apart from that we also make sure that the wave soldering machine comes with good heat uniformity of solder pot. Our devices have special design due to the implementation of less solder reside that is being generated from the Patented design of impeller and channel for improving the soldering wave stability. We make sure to reduce the overlapping convenience for maintenance.

This presentation uses a free template provided by FPPT.com The wave soldering machine comes with multiple parts. There is a heated tank of solder. The temperature is maintained for the soldering process to continue. Within the tank, the wave solder is setup and the printed circuit boards are passed over. This is done so that the underside of the board will contract the solder weave. Care must be taken for adjusting the height of the wave so that it will not come up over the top side of the board and cause the solder to get into places where it is not required.

This presentation uses a free template provided by FPPT.com 1clicksmt-wavesoldering.com

This presentation uses a free template provided by FPPT.com