Using your mobile as a modem on Window XP

Ways of Connecting your laptop Using infrared link Using data cable

Before starting… Subscription to GPRS is a prerequisite Confirm that the handset supports IR reception and same is available on your laptop In case of connecting through data cable, make sure the data cable is attached and the mobile is detected by the computer Following settings apply on connectivity via IR link and data cable.

Using IR link Activate IR reception on your handset Ensure the line of sight of the IR link between laptop and handset Laptop will automatically detect your handset, appearing on the task bar Ensure that the IR link remains established between your laptop and handset.

Laptop settings Click on to my computer and then control panel Click here

In printer and hardware option Click on to phone and modem setting Click on phone & modem

Phone and modem tab In the modem tab select standard modem over IR link

Phone and modem option Click on to dialing rules tab in the phone and modem option Press edit button Edit button

Edit location In the edit location window, click on to the general tab Select tone option Press ok Select tone

Phone and modem tab Click on the modem properties Click on to properties

Modem properties Select maximum port speed

Modem properties Click on to the advance tab and enter the extra initialization commands: NOTE: Please do not copy paste the mentioned string, Only manual typing is required. For Post Paid AT+CGDCONT=1,"IP",“ufone.internet”;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31 For Pre Paid AT+CGDCONT=1,"IP",“ufone.pinternet”;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31 For U-Mail Account AT+CGDCONT=1,"IP",“umail.internet”;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31

Modem properties Confirm the correct initialization string, in order to avoid any errors while connecting Click on to the advance port settings Click here

Modem properties In the advance port settings uncheck the use FIFO buffers Select the com number currently in use Press ok button COM in use

Modem properties Click on to change default preferences button Select port speed to maximum Select hard ware flow control to none Press ok and exit modem properties Max port speed Flow control to none

Setting up a new dial up connection Go to my computer control panel Click on to network and internet connection Click here

Setting up a new dial up Connection Click on to network connection Click here

Setting up a new dial up connection Click on to create a new connection Click here

Setting up a new dial up connection Click on to the next button on the new connection wizard Click next

Setting up a new dial up connection Select connect to the internet option Press next button

Setting up a new dial up connection Select “set up my connection manually” Press next button Select Press next

Setting up a new dial up connection Select “connect using a dial up connection” Press next select Press next

Setting up a new dial up connection Enter Ufone as ISP name Press next Enter Ufone Press next

Setting up a new dial up connection Enter *99***1# in the phone number field Press next

Setting up a new dial up connection Uncheck the options and leave the fields blank Press next

Setting up a new dial up connection Press next button to finish to complete the connection wizard