THE AUTOMATIC PROCESSOR

AUTOMATIC PROCESSOR DAYLIGHT SYSTEM

PROCESSOR

SECTIONS OF THE PROCESSOR D F W D

FEEDING FILM INTO THE PROCESSOR FEED TRAY

MICROSWITCH

ENTRANCE ROLLERS ENTRANCE ROLLER ENTRANCE ROLLER

FILMS ORIENTATION ON THE TRAY 14 X 17 11 X 14 10 X 12 8 X 10 7 X 17

FILM

FILM

FILM FILM

PROCESSOR SYSTEMS & SUBSYSTEMS TRANSPORT TEMP. CONTROL RECIRCULATION REPLENISHMENT DRYER ELECTRICAL

TRANSPORT TRANSPORT FILM THROUGH PROCESSOR, REGULATION OF IMMERSION TIME, AGITATE SOLUTIONS

TRANSPORT SYSTEM SUBSYSTEMS ROLLERS TRANSPORT RACK DRIVE MOTOR

ROLLERS-PROPEL THE FILM

TRANSPORT RACKS-HOLD ROLLERS AND GUIDE SHOES

DRIVE MOTOR—POWER FOR MOVEMENT OF ROLLERS

TRANSPORT GUIDE SHOE ROLLER RACKS

TRANSPORT ROLLER ASSEMBLY PLANETARY ROLLERS

TURNAROUND ASSEMBLY MASTER GUIDE SHOE

TURNAROUND ASSEMBLY MASTER ROLLER GUIDE SHOE SQUEEGE ROLLER

TEMPERATURE CONTROL—DRYER AND SOLUTION TEMPERATURE ELECTRICAL HEATER

TEMPERATURE MEASUREMENT ACCURATE TO +-0.5º F DO NOT USE: MERCURY OR ALCOHOL THERMOMETRS!

TEMPERATURE DEVELOPER FIXER WASH DRYER 95 DEG F +-0.5º 95 DEG. F +- 5º

TEMP. CONTROL

DRYER TEMP. RECIRCULATION DRYER BLOWER

RECIRCULATION –AGITATION OF SOLUTIONS+ FILTRATION FILTER PUMP

RECIRCULATION

CIRCULATION OF WATER THROUGH WASH TANK--- 3 GALLONS/MIN CIRCULATION OF WATER THROUGH WASH TANK--- 3 GALLONS/MIN. ( 12 LITERS/MIN.)

REPLENISHMENT SYSTEM

REPLENISHMENT D F REPLENISHMENT PUMP

REPLENISHMENT RATES FOR EVERY 14 IN. OF FILM 60-70 ML OF DEVELOPER 100-110 ML OF FIXER VARIATION: +- 5%

MOST PROCESSORS DROP TIME 90 SEC. PROCESSING TIME 45 SEC-210 SEC. MOST PROCESSORS DROP TIME 90 SEC. VARIATION: +- 2-3%