LV Compensation and Filtering Give Oxygen to your electrical network Varplus² capacitors Varlogic N controller Detuned Reactor LC1-D contactors Varpact modules Components Modules

VARPLUS² : the range Give Oxygen to your electrical network A fully modular offer with only one size for installation and connection Maximum power per unit : 20 kvar at 50 Hz Installation in all positions Possibility of wiring connection at 360° 50 Hz or 60 Hz Additional options : IP 20/42 protection kit 2 bus bars set connection between capacitors

VARPLUS² : the range Give Oxygen to your electrical network Assembly of capacitors Connection with bus bars kit or you can build your own bus bars if you prefer Additional IP 20/42 protection kit

Varlogic N controller Give Oxygen to your electrical network Varlogic NR6 / NR12 : Analyse and inform about data of the network Manage the reactive power to obtain the targeted cosφ Check the proper working of the system Easy use thanks to the auto setting Simple reading of the main measures

Varlogic N controller Give Oxygen to your electrical network A higher level of expertness : more than the NR6/NR12 Varlogic, the NRC12 Varlogic brings : More measures : total current harmonic distortion THD(I), voltage and current harmonic spectrum Answer to specific applications : 4 quadrant operation for generator application, possibility of dual cos j target, medium voltage application, fixed step configuration programming Simple interface with a graphic screen, help menu A communicating controller Communication RS485 Modbus set as an option

Detuned Reactor Give Oxygen to your electrical network Detuned Reactors : The detuned reactors are 3-phase inductances, designed to protect the capacitors and prevent amplification of the harmonics present on the network. The range is going from 6 to 100 kvar, for 400/415V network voltage at 50 Hz. Three tuning orders are available (135, 190 et 215 Hz) Safety thanks to the temperature sensor (allow the protection) Dry type  very few maintenance

LC1 – D contactors Give Oxygen to your electrical network The use of standard contactors may compromise the safety of persons and installations (capacitor control is accompanied by transient operating conditions resulting from the capacitor load which, amongst other thing, generates a very high overcurrent equivalent to a short-circuit of short duration) The LC1-D K contactors are specially designed for capacitor control. They are fitted with a contact block allowing the current to pass on closing and with damping resistors limiting the current on energisation.

VARPACT : the range Give Oxygen to your electrical network A pre-wired assembly, ready to be installed in the bank. Capacitors, commutation function, protection function are already incorporated inside VARPACT It will allow you to build your capacitors bank in a very short time. Maximum power for 1 module : 120 kvar at 50 Hz Tested at 100% inside Schneider plant With or without bus bars : you have the choice.

VARPACT : installation Give the right specifications Installation of modules in the cubicle : Varpact without bus bars : Varpact with bus bars :