CONTROL VISION Set-up

Step 1 Step 2

Step 3 Step 5 Step 4

Step 6 Step 9Step 8 Step 7

Step 10Step 11 Step 12Step 13

Step 14Step 15 Step 16Step 17

Close Administration completely Step 18Step 20 Step 19Step 21

Verify click green Step 23 Step 22 Clickicon

Step 24 Step 25 Close Administration Open Control Vision desktop icon

Step 26Step 27 Select Configuration

Step 28 Step 29 Step 30 Select Devices input Select icon

Fill-in yellow space – device description Select to verify Full in address as per address in field device Step 32 Step 31 Fill in Name Fill in Product Fill in Access address

Step 33 Click to add more devices

Step 34Step 35

Step 36Step 37 Click for readings

Step 38 Step 39 Click for General measurements and alarms reading Click for General meter reading

Step 40 Step 41 Click to view the event log of measurements Click to view the event Graft

Step 42 Click for Instant reading of harmonics