doc.: IEEE /1345r0 Submission November 2013 Jiamin Chen, HuaweiSlide 1 Dynamic Channel Transfer(DCT) Procedure for IEEE aj （ 60GHz New Technique Proposal ） Date: Presenter:

doc.: IEEE /1345r0 Submission November 2013 Author List Slide 2Jiamin Chen, Huawei

doc.: IEEE /1345r0 Submission November 2013 Author List Slide 3Jiamin Chen, Huawei

doc.: IEEE /1345r0 Submission November 2013 Abstract This document is to propose a MAC protocol amendment to support dynamic channel transfer procedure for aj (60GHz) Slide 4Jiamin Chen, Huawei

doc.: IEEE /1345r0 Submission November 2013 Background(1/2) Proposed Channelization for 60GHz bands for aj –There are 6 logical channels: 2 bands with 2.16GHz bandwidth (Channel 2 & 3), 4 bands with 1.08GHz bandwidth (Channel 5, 6, 7, 8); –Supporting more than 3 logical channels for aj and keeping the backward compatibility with ad device ； Channelization for 60GHz bands in China Jiamin Chen, Huawei Slide 5

doc.: IEEE /1345r0 Submission November 2013 Background(2/2) Regulations that apply to the 60GHz band in China allow RLANs to operate in the Chinese 60 GHz band to use 1.08GHz or 2.16GHz bandwidth, which requires a mechanism to coordinate the allocation of operating channel. This document propose a mechanism referred to as Dynamic Channel Transfer (DCT). This mechanism can improve the flexibility and channel utilization efficiency when aj devices operate in Chinese 60Ghz frequency band, in case that the idle channel bandwidth cannot satisfy the operating requirement for aj devices. Jiamin Chen, HuaweiSlide 6

doc.: IEEE /1345r0 Submission November 2013 Dynamic Channel Transfer(DCT) procedure for IEEE aj Some cases (Case 1 to Case 3): A new STA may request an existing BSS to move to another available channel to allow the new aj STAs to establish a new BSS. Slide 7 Case 1 (Channel 6, 8 are occupied by existing BSS-1 and BSS-2 at 1.08GHz) –New STA (to become PCP/AP-3) wants to start a new BSS- 3 at 2.16GHz. –PCP/AP-3 request BSS-1 on channel 6 to move to channel 7, or request BSS-2 on channel 8 to move to channel 5. –PCP/AP-1 or PCP/AP-2 shall assess the request against its capabilities and the impact on its BSS’s performance. –PCP/AP-1 or PCP/AP-2 may refuse the request for some reasons such as their BSS are busy and so on. –If the request is confirmed, PCP/AP-3 may have a chance to use channel 2 or channel 3(2.16GHz) to start a new BSS. Case 2 / 3 are similar to Case 1 Jiamin Chen, Huawei

doc.: IEEE /1345r0 Submission November 2013 Dynamic Channel Transfer(DCT) procedure for IEEE aj Slide 8 Case 4 （ Channel 2, 8 are occupied by BSS-1 at 2.16 GHz and BSS-2 at 1.08 GHz respectively ） –New STA (to become PCP/AP-3) wants to start a new BSS-3 at 2.16 GHz. –PCP/AP-3 requests BSS-1(PCP/AP-1) on channel 2 to move to channel 7. –The PCP/AP-1 shall assess the request against its capabilities and the impact on its BSS’s performance. –PCP/AP-1 may refuse the request for some reasons. –If the request is confirmed, PCP/AP-3 may have a chance to use channel 2 (2.16GHz) for networking. Jiamin Chen, Huawei

doc.: IEEE /1345r0 Submission November 2013 Dynamic Channel Transfer(DCT) procedure for IEEE aj(60GHz) Public action frame in spec –Inter-BSS and AP to unassociated-STA communications –Intra-BSS communication and so on Proposed new public action frame for the DCT procedure: –DCT Measurement Request frame  Request one or more STAs in the DCT responder PCP/AP’s BSS （ PBSS or Infrastructure BSS ） to measure a specified channel or all other channels within supported operating class. –DCT Measurement Report frame  Be transmitted from the DCT responder PCP/AP to the DCT requester PCP/AP to report the result of channel measurement or refuse the DCT request. –DCT Request frame  Request DCT responder PCP/AP’s BSS to move to an new available channel reported in the DCT Measurement Report frame. –DCT Response frame  Be transmitted from the DCT responder PCP/AP to the DCT requester PCP/AP to confirm or refuse the DCT request. Slide 9Jiamin Chen, Huawei

doc.: IEEE /1345r0 Submission November 2013 Dynamic Channel Transfer(DCT) procedure for IEEE aj Dynamic Channel Transfer (DCT) procedure  assessing idle channel for networking  Requesting of measurements for new channel for the DCT responder BSS  Reporting of the result of measurements  Requesting existing BSS to move to a new channel  Networking on target channel Slide 10Jiamin Chen, Huawei

doc.: IEEE /1345r0 Submission November 2013 Conclusion This proposal is to provide a mechanism referred to as Dynamic Channel Transfer (DCT) procedure. This mechanism can improve the flexibility and channel utilization efficiency when aj devices operate in the Chinese 60Ghz frequency band, in case that the idle channel bandwidth cannot satisfy the operating requirement for aj devices. Slide 11Jiamin Chen, Huawei

doc.: IEEE /1345r0 Submission November 2013 Reference [1] IEEE /1197r0 - Physical Channel Consideration for Chinese 60GHz Band Thank YOU! Slide 12Jiamin Chen, Huawei