SIRIUS Safety Controls Sicherheit liegt im System Von der Sensorik über die Auswerteeinrichtungen bis hin zur sicheren Abschaltung – in Zukunft auch in die Aktoren hinein, wie z.B. Antriebe - bietet Safety Integrated mit den Produktgruppen SIGUARD, SIMATIC und SINUMERIK/SIMODRIVE einen hoch wirksamen Personen- und Maschinenschutz. Sie bauen Schritt für Schritt aufeinander auf. Das Logo ist ein Kennzeichen der Produkte aus diesen Produktgruppen, die mit Sicherheitsfunktionalität ausgestattet sind. „Safety Integrated by Siemens“ ist ein eingetragenes Warenzeichen.

SIRIUS Safety Controls SIRIUS E-STOP devices SIRIUS Interlock switches SIRIUS Hinge switches SIRIUS Cable Pull Switches SIRIUS Magnet Switches SIRIUS Two-Hand Controls Popular designs for E-STOP circuits and machine guarding Door guarding applications - Interlock with separate actuator - Interlock with Solenoid locking / unlocking - by non contact (Magnetic coded) Two Hand Controls stations SIRIUS Safety Control product range is applicable for applications Cat. 1 to Cat. 4 (EN954-1) Safety Controls should always be used in conjunction with a Safety Relay or other safety rated modules such as ET200S / M / Eco distributed I/O or S7 Failsafe PLC’s

Class 52 NEMA 4X Corrosion Resistant E-Stops Class 52 4X Corrosion Resistant Class 52 NEMA 4X Corrosion Resistant E-Stops

Class 52 4X Corrosion Resistant Epoxy coated devices for caustic and corrosive environments. Self-protected against the ravages of industry’s harshest environments. Heavy duty die cast parts shielded with epoxy coatings. Perform reliably year-in and year-out under corrosive and caustic conditions.

3SB3 E-Stops 32mm 40mm 60mm Project: Status: E-Stop operator with 32 40 and 60 mm heads Plastic and metal versions 32mm Metal= 3SB3500-1FA20 Plastic=3SB3000-1FA20 40mm Metal= 3SB3500-1HA20 Plastic=3SB3000-1HA20 60mm Metal=3SB3500-1AA20 Plastic=3SB3000-1AA20 Status: Available in stock

New 3SB3 40MM E-Stop with Flat Head This new e-stop has a flat mushroom head shape that many of our customers are familiar with and is similar to our push-pull operators. It is currently only available in plastic and it does carry the EN 418 rating 3SB3000-1XA20

Emergency Stop: Safety guaranteed SIGNUM 3SB3 AS-Interface (ASIsafe) Emergency Stop: Safety guaranteed High level of safety with emergency stop pilot devices Mechanical latching function acc. to EN 418 Positive opening of NC elements Twist-to-release feature Also available with safety key lock Ergonomically shaped TÜV listed

Product Overview 3SE2 / 3SE3 Safety Limit and Interlock Switches Safety Controls SIRIUS 3SE2 3SE3 Safety Limit and Interlock Switches 3SE2120 3SE2100 3SE2230 3SE2200 3SE224 3SE28 3SE37

SIRIUS Position Switches Suitable for Safety applications* NC- contacts with direct opening action, acc. IEC 947-5-1 For use up to category 4 acc. EN954-1 when used with redundancy (i.e. two switches per door) Economical, electronic compatible, electrically isolated moveable double contacts High contact reliabillity even with low voltages and currents, e.g. 5V DC / 1mA Ambient temperature from -35° to +85°C High mechanical endurance, 30 million make-break operations Actuator versions for all kinds of application High degree of protection IP 67 Available in AS-Interface connection Metal Versions Plastic Versions * Only when direct opening contacts are used. See the symbol * Use of adjustable length and rod type actuators are not allowed in safety applications

Most Popular Interlock Switches For use in door interlock (safety) circuits according to EN1088, up to cat. 4 Positive opening action contacts according to IEC 60947-5-1-3 Either 4 or 5 directions for actuator approach on most models 1 to 3 switching contacts Standard, Lateral and radius actuators Housing widths of 31, 40 and 52mm. Metal or Plastic housings with IP65 / IP67 Some versions with M12 connector Up to 30 Million mechanical switching operations Ideal for use in hard-wired, ASIsafe or PROFIsafe distributed networks and SIMATIC F-PLC systems

SIRIUS Interlock Switches with Seperate Actuator

SIRIUS Interlock Switches with Seperate Actuator

SIRIUS Interlock Switches with Seperate Actuator Solenoid locking or unlocking Metal Enclosure 3SE28 Plastic Enclosure 3SE37 For use in safety circuits according to EN1088, up to cat. 4 Safety door locking / unlocking on machine tools with speed monitors Solenoid locking or unlocking versions 270 / 450lbs locking force Either 4 or 5 directions of approach 2 or 4 switching contacts Standard, lateral and radius actuators Available with AS-Interface adaptors for connection to ASIsafe networks

SIRIUS Interlock Switches with Seperate Actuator Solenoid locking or unlocking

Actuator‘s for Solenoid locking or unlocking units For 3SE283 / 84 versions For 3SE375 / 76 and 3SE385 / 86 versions

SIRIUS Interlock Switches with Seperate Actuator Solenoid locking or unlocking

Positive Mode Mounting for Interlock’s Incorrect Method Closed Open

Positive Mode Mounting for Interlock’s Correct Method Actuator is forced open by the External force of the sliding door Closed Open

SIRIUS Safety Hinge Switches Sleek low profile and compact design Used for perimeter protection on guard doors Tamper resistant Positive opening action Normally Closed contacts IP65 and IP66 enclosures

SIRIUS Safety Hinge Switches Advantages Mounting options: - with integrated hinge - on hinge axis - on hinged flaps Very small angles to switching point - 4o or 8o to open slow action contacts - 5° or 15o to open snap action contacts Applications monitoring hinged doors up to category 4 acc. EN954-1

SIRIUS Hinge Switch Applications

SIRIUS 3SE7 Cable Pull Switches Plastic and metal enclosures Rope lengths up to 165’ with pretension Rope Lengths up to 400’ without pretension Two direction units with rope lengths of up to 165’ each direction (330’ total span) Can be used as a safety switch for conveyor systems or production lines, or as a signaling switch (without latching) Switches with 24VDC and 120VAC LED indicators Available with AS-Interface adaptors for connection to ASIsafe networks New model Integrated E-Stop Competes against AB Life Line 4

SIRIUS Rope-Pull Switch application

LifeLine 4 vs. 3SE7141 3SE7141 LifeLine 4

Safety Magnet Switches Advantages: System comprising of a magnet and switching element 3 different versions, IP67 rated AC or DC voltage Ideal for connection to safety networks and Safety PLC‘s Single channel or Six channel evaluation units for cat. 3 or cat. 4 applications

Safety Magnet Switches

New Multi-Magnetic Switch Relay 3SE6806-2CD00 Up to 6 sensors can be connected 24V DC operating voltage For 1NC/1NO magnetic switch types 6 PLC signal outputs, each 20 mA for individual door annunciation 2 enabling circuits, relay output Cat. 3 according to EN 954-1 UL / CSA approval

Safety Magnet Switches 3SE6 Switching Ranges

Safety Magnet Switches 3SE6 Application as door switch

Two Hand Control Systems Compliant with DIN 24980 (EN 574) Console is rated at IP65 Applicable to Category 4 according to EN 954-1 4 or 8 control devices can be additionally mounted at the center of the operation console Plastic or die-cast aluminum housing Console mounting on stand or directly at the machine

Two Hand Control Systems Connection possibilities

Two Hand Control Systems Two Hand control systems, when used as the primary means of personnel safeguarding shall: Be designed to prevent accidental or unintentional operation Have the individual operator’s hand controls arranged such that both hands must be used, and both circuits must be activated within 500ms to initiate / cycle the machine. Requires individual hand controllers for each operator when multiple operators exist

ASIsafe and Profisafe Safety Networks Safety on a bus network saves overall costs!!

ASIsafe and Profisafe Safety Networks SIMPLIFIED SAFETY Safety networks provide savings at OEM’s and End Users: Considerable wiring reduction Labor savings Increased diagnostics of safety components Simpler maintenance Increase machine availability Higher production output SIRIUS Safety Controls are ideal for: Connection to safety networks Pull through on your automation sale

AS-Interface Distributed Configuration Safety at Work Standard PLC and standard master Safety monitor Safe emergency stop button Safe module Standard module AS-i power unit Safe light grid Safe position switch Safe light barrier Standard module

AS-Interface Distributed Configuration Safety at Work Standard PLC and standard master Safety monitor Safe emergency stop button Safe module Standard module AS-i power unit Safe light grid Safe position switch Safe light barrier Standard module

AS-Interface Distributed Configuration Safety at Work Gateway to AS-Interface Safety monitor Safe emergency stop button Safe module Standard module AS-i power unit Safe light grid Safe position switch Safe light barrier Standard module

Safety Controls for Safety Networks (ASIsafe) E-Stop Switches Limit Switches Interlock Switches Rope Pull Switches Refer to the Controls Catalog or the IKPI Catalog for additional units or contact product marketing for the latest offering