© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. FB7600 Appendix

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 2 Print Modes Resolution (dpi) # of Passe s Printing Directio n # of Cycles Baseline mask (%) Printing Speed (m/sec) Print Mode Name PrintxC. PrintPrinting Extra UV Duty POP_17508x5005UniDir POP_30508x5005BiDir POP_34_Text600x4003UniDir POP_40508x4003UniDir POP_48508x5003BiDir POP_52508x4003BiDir POP_55_solid400x3005BiDir Production_70400x3003BiDir Production_95400x3002BiDir

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 3 The print height can be reduced to 1.5 mm. This feature is enabled from the Preferences/Quality tab and its purpose is to improve the print quality of the text provided the substrate is perfectly flattened on the printing table (otherwise a "rising media" problem might accrue). Note: This feature can be enabled by FSE only after hardware checks and adjustments. 1.5mm Print Height The 1.5mm print height is defined in the Substrate Editor for the specific substrate. It can be temporarily changed in the Job Properties window.

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice mm Print Height The 1.5mm print height is defined in the Substrate Editor for the specific substrate. It can be temporarily changed in the Job Properties window.

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 5 The Flexible Media feature in the Substrate Editor supports automatic loading of thin flexible substrates and enables the user to expand the range of substrates to thinner substrates close to 130 gr/m2 (~5 pt). Flexible Media

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 6 Flexible Media The user may select loading sequence which controls the vacuum zones differently. When Flexible Media is activated, the relevant sequence can be selected from the drop- down menu

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 7 Sort By Sorting according to name and date is available in the following screens: Add new Job Add existing Job Deleted (Job)s from disk Right click the column heading and select “Sort by name /Sort By Date Modified”.

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Print Care

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 9 What are the features available in Print Care? Print Care Overview Better Diagnostics and Troubleshooting New Calibration Patterns for MNC White Ink Calibration

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Sources of Information

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 11 SAW The engineers should know haw to use and locate technical documentation in SAW

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 12 Advanced Printer Guide Advanced Printer Guide is the FB7600 interactive online manual. To access it, click Advance Printer Guide from the Help menu. The Advanced Printer Guide significantly saves time and money by providing: Instant online updates; compared to the printed version that required manual reproduction, duplication and mail distribution Quick access to required information through the Index and Search tabs; compared to time- consuming searches in the hard copy version, which may also, in time, be lost or misplaced.

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 13 Capture Web Site Capture is a web site for HP customers. In Capture site, HP customer can find: printer information, tip & tricks, technical documentation, training materials and more.

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 14 GCSN The GCSN portal enables channel partners to perform various activities, for support purposes, channels partners CE’s have access to the “Technical Information” section only

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice Software

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 16 Before (Old working point) After (New working point) By changing the work point of the print heads – changing the pulse width to 7 instead of 10 raising the ink temperature from 38 to 42 – we change the drop shape (making it rounder). What is the “New Working Point”?

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice pt. 4 pt. Prod70Printing speed: 1.3m/sec Print Height: 2 mm 3 pt. 4 pt. How does it work? – Cont.

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 18 New Vacuum Caps New vacuum cups No switch between rigid and flexible substrates Customer Benefit Save up to 15 minutes of set up time when changing between jobs, for operator ease of use * This kit is not part of the MLK and will be available in Q1 as After Market Kit for current install base. * Q1 Installations - we have created FCO kit to be implemented during the installation; in case of ML installation, the customer will get an additional kit Vacuum Cups Upgrade Ship by mail Customer self installation only (No engineer visit is required)

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 19 Enables you to Enable/disable The piston (Vacuum + Up/Down) Suction cup for Rigid and flexible media

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 20 LOCK BUSHING – now it is easier to move the piston, improved user experience. and it is also locked it to the beam.

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 21 Supports thin media, lower position of the assembly Slider – forcing the piston to move down & up without swiveling OR component –keep the piston up in disable mode

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 22 ColorLogic application Metallic colors effect What is it A design application S.W plugin optimized for the FB7600 that enables creation of metallic effect The application Premium and unique POP/POS applications DesignerRIPPrint

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 23 Printing metallic substrates with FB7600 Metallic colors effect Tests that were conducted in R&D showed that it is possible to print on metal (reflective) media using the FB7600 without effecting the Print heads health. Currently only Hazen Silver media is officially certified, with more media types certificates on the way. For maintaining nozzle health when printing with Hazen Silver, it is recommended to perform maintenance every 2 hours.

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 24 Negative Text T&T By adding 0.25 stroke to thin text (using Adobe Illustrator) we actually compensating for the lines and small text size loss and it will look sharper, yet thicker (depending on stroke size).

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. 25 Hostert Automatic Loader Hostert underwent HP qualification As HP’s silver partner. QUALIFICATION RESULTS: 4-up (multi loader like) 10 qualified media types Double-sided Improved media handling Prerequisites for Autoloader installation: The auto loader will support only FB7600 and upgraded FB7500 with CP389A Kits will be sold through AFM P/NCP411A Contents  Safety kit  Vacuum cups kit (CP407A)  4up sensor kit  4up Nip plate

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Thank you