LQ & LM Status & Plan for FY08 – Fred Nobrega 1 LARP Collab. Meeting – SLAC, Oct. 17-19, 2007 BNL - FNAL - LBNL - SLAC Long Quadrupole (LQ)-Long Dipole.

Slides:

Advertisements

Similar presentations

TWO STEP EQUATIONS 1. SOLVE FOR X 2. DO THE ADDITION STEP FIRST

Advertisements

By D. Fisher Geometric Transformations. Reflection, Rotation, or Translation 1.

Jeopardy Q 1 Q 6 Q 11 Q 16 Q 21 Q 2 Q 7 Q 12 Q 17 Q 22 Q 3 Q 8 Q 13

Jeopardy Q 1 Q 6 Q 11 Q 16 Q 21 Q 2 Q 7 Q 12 Q 17 Q 22 Q 3 Q 8 Q 13

DIVIDING INTEGERS 1. IF THE SIGNS ARE THE SAME THE ANSWER IS POSITIVE 2. IF THE SIGNS ARE DIFFERENT THE ANSWER IS NEGATIVE.

MULTIPLYING MONOMIALS TIMES POLYNOMIALS (DISTRIBUTIVE PROPERTY)

ADDING INTEGERS 1. POS. + POS. = POS. 2. NEG. + NEG. = NEG. 3. POS. + NEG. OR NEG. + POS. SUBTRACT TAKE SIGN OF BIGGER ABSOLUTE VALUE.

SUBTRACTING INTEGERS 1. CHANGE THE SUBTRACTION SIGN TO ADDITION

MULT. INTEGERS 1. IF THE SIGNS ARE THE SAME THE ANSWER IS POSITIVE 2. IF THE SIGNS ARE DIFFERENT THE ANSWER IS NEGATIVE.

TQM05 (coil #36) Test Summary 1. TQ coil #36 in a mirror structure Coil #36 tested with a radiation resistant impregnation material 0.7-mm diameter Nb.

May 9, 2012D. R. Dietderich, LARP CM-18 Cable Fabrication Plans and Experience D.R. Dietderich Lawrence Berkeley National Laboratory bnl - fnal- lbnl -

© S Haughton more than 3?

Past Tense Probe. Past Tense Probe Past Tense Probe – Practice 1.

Superconducting Magnet Program S. Gourlay CERN March 11-12, Lawrence Berkeley National Laboratory IR Quad R&D Program LHC IR Upgrade Stephen A.

LM dipole status & plans – Fred Nobrega 1 Long Quadrupole (LQ) Workshop, February 7-9, 2007 BNL - FNAL - LBNL - SLAC Long Dipole Mirror (LM) Status and.

Addition 1’s to 20.

25 seconds left…...

Test B, 100 Subtraction Facts

BNL - FNAL – LBNL - SLAC US LHC Accelerator Research Program LQ Reaction/Impregnation DR’s & Travelers at FNAL CM15 Magnet Systems Working Groups HQ Coils.

LQ Reaction & Impregnation Tooling Internal Review F. Nobrega, N. Andreev May 7, 2007.

LQ Reaction & Impregnation Tooling Internal Review F. Nobrega, N. Andreev August 13, 2007.

LQ Winding and Curing Tooling Internal Review F. Nobrega, N. Andreev April 9, 2007.

We will resume in: 25 Minutes.

Racetrack Coil Technology – G. Ambrosio 1 LARP DOE review – FNAL, June. 5-6, 2007 BNL - FNAL - LBNL - SLAC Racetrack Coil Technology (LR, SQ) & other Supporting.

SQXF Coil 2 Impregnation Status & Plan Fred Nobrega 09/09/2014.

Coil Design and Fabrication Miao Yu Outline Introduction Coil Design –Coil Pole –Coil End Parts –Coil Insulation Coil Fabrication –Winding.

Long Racetrack (LR) strategy – G. Ambrosio 1 LARP DOE review - FNAL, June 12-14, 2006 BNL - FNAL - LBNL - SLAC OUTLINE: LR R&D goals & plans Long Racetrack.

IR Quad Cost Estimate Status Marc Kaducak 02-Nov-2012 IR Quad Cost Estimate - M. Kaducak1.

Fred Nobrega. 9 Dec 2014 Model Design & Fabrication – FNAL Fred Nobrega 2 Outline Background Mechanical Design Model Magnet Features Coil Technology and.

LQ Goals and Design Study Summary – G. Ambrosio 1 LARP Collab Mtg – SLAC, Oct , 2007 BNL - FNAL - LBNL - SLAC LQ Goals & Design Summary Giorgio Ambrosio.

LQ status and plans – G. Ambrosio 1 LARP Collaboration Meeting - LBNL, April , 2006 BNL - FNAL - LBNL - SLAC OUTLINE: Goals, Input and Output Sub-tasks.

DOE Review of LARP – February 17-18, 2014 Coil Design and Fabrication Miao Yu February 17,

F LARP magnet R&D program Giorgio Ambrosio TD/MSD FNAL Annual Program Review September 07 OUTLINE LARP goals FNAL contribution to LARP FNAL core-program.

11 T Nb3Sn Demonstrator Dipole R&D Strategy and Status

Plans and schedule for QXF Giorgio Ambrosio and Paolo Ferracin Joint LARP/CM20 HiLumi meeting Napa Valley, CA, USA 8-10 April, 2013 The HiLumi LHC Design.

11 T Dipole Status at FNAL Fred Nobrega January 21, 2014.

Fred Nobrega, Nikolai Andreev 21 September, 2015.

BNL - FNAL - LBNL - SLAC Progress Report on LQ Program Giorgio Ambrosio Fermilab Task Leaders: Fred Nobrega (FNAL) – Coils Jesse Schmalzle (BNL) – Coils.

S. Caspi, LBNL HQ Progress and Schedule Shlomo Caspi LBNL LARP Collaboration Meeting – CM13 Port Jefferson November 4-6, 2009.

LQ03 Titanium Pole Length Study Fred Nobrega LQ Collaboration Video Meeting June 27, 2008 BNL - FNAL - LBNL - SLAC.

LARP DOE Review, 7/9/2012Magnet Systems Introduction – G. Sabbi 1 Magnet Systems Overview and HQ Program GianLuca Sabbi 2012 DOE Review of LARP SLAC, July.

LARP Magnets FNAL contribution to LARP (LHC Accelerator Research Program) FNAL core-program support to LARP DOE Annual Program Review - May 16-18, 2006.

LARP Magnet Progress Michael Lamm For the LARP Collaboration bnl - fnal - lbnl - slac US LHC Accelerator Research Program All Experimenters’ Meeting Monday,

Long Quadrupole – G. Ambrosio 1 LARP Collaboration Meeting – FNAL, Oct , 2008 BNL - FNAL - LBNL - SLAC Long Quadrupole Giorgio Ambrosio LARP Collaboration.

HE-LHC, 10/14/2010GianLuca SabbiUS LARP Magnet Development LHC Accelerator Research Program Magnet Development GianLuca Sabbi for the US LARP collaboration.

FRESCA2 Technical Meeting 5-Validation of coil winding with Cu coils Françoise Rondeaux 09/06/ CEA-Irfu-SACM-LEAS - 5-Rondeaux- FRESCA2 Technical.

11 T Dipole Project CERN Status M. Karppinen 11 T Management meeting 1 July 2013.

MQXF Short model and prototype plans P. Ferracin, G. Ambrosio HL-LHC/LARP International Review of the MQXF Design December 10-12, 2014 CERN.

1 BNL -FNAL - LBNL - SLAC P. Wanderer IR’07 - Frascati 7 November 2007 U.S. LARP Magnet Programme.

Long Quad (LQ) & High Gradient (HQ) Series Alexander Zlobin bnl - fnal- lbnl - slac US LHC Accelerator Research Program DOE LARP review Fermilab, June.

DOE Review of LARP – February 17-18, 2014 SQXF Coil Design and Fabrication Winding and Curing Miao Yu February 17,

S. Caspi, LBNL HQ Magnet Program Shlomo Caspi LBNL LARP DOE Review FNAL June 1-2, 2011 BNL Jesse Schmalze Mike Anarella Peter Wanderer Arup Gosh FNAL Rodger.

LARP DOE Review, 7/9/2012Long Quadrupole – G. Ambrosio 1 Long Quadrupole Program Giorgio Ambrosio DOE Review of the LARP Program SLAC July 9-10, 2011 LQ.

BNL - FNAL - LBNL - SLAC Long Quadrupole Giorgio Ambrosio Fermilab Many people contributed to this work, most of all the Long Quadrupole Task Leaders:

BNL - FNAL - LBNL - SLAC 6m (and 8m) scale-up Giorgio Ambrosio Fermilab Contributions from: Fred Nobrega, Rodger Bossert, Guram Chlachidize (FNAL) Jesse.

LARP CM15, SLAC, 11/3/2010GianLuca SabbiSummary of MS Parallel Sessions Summary of Magnet Systems Parallel Sessions GianLuca Sabbi LARP Collaboration Meeting.

2 nd LARP / HiLumi Collaboration Mtg, May 9, 2012LHQ Goals and Status – G. Ambrosio 11 LHQ Goals and Status Giorgio Ambrosio Fermilab 2 nd LARP / HiLumi.

LARP Collaboration Meeting 15 Nov 1-3, 2010 Conductor Procurement and Qualification Arup K. Ghosh (BNL) bnl - fnal- lbnl - slac US LHC Accelerator Research.

P. Ferracin on behalf of the MQXF collaboration

QXF Coil Fabrication & Tooling Reaction / Impregnation

11 T Dipole Integration & Plans M. Karppinen

J.C. Perez on behalf of SMC collaboration team J.C. Perez

P. Ferracin and G. Ambrosio

the MDP High Field Dipole Demonstrator

MQXF updates P. Ferracin October 9th, 2014.

Detection thresholds in LARP Magnets

QXF schedule and milestones

Presentation transcript:

LQ & LM Status & Plan for FY08 – Fred Nobrega 1 LARP Collab. Meeting – SLAC, Oct , 2007 BNL - FNAL - LBNL - SLAC Long Quadrupole (LQ)-Long Dipole Mirror (LM) Status & Plan for FY08 Fred Nobrega 9 th LARP Collaboration Meeting October 17-19, 2007

LQ & LM Status & Plan for FY08 – Fred Nobrega 2 LARP Collab. Meeting – SLAC, Oct , 2007 LQ Status Winding tooling complete. »All winding parts in IB3 or inspection Curing tooling used is from LHCIR quad program. Preassembly of first LQ practice coil parts.

LQ & LM Status & Plan for FY08 – Fred Nobrega 3 LARP Collab. Meeting – SLAC, Oct , 2007 LQ Status Cured coil roll over table is operational. (LHCIR quad tooling) roll-over station 2m dipole coil 4m dipole coil being extracted from curing mold

LQ & LM Status & Plan for FY08 – Fred Nobrega 4 LARP Collab. Meeting – SLAC, Oct , 2007 LQ Status Reaction tooling is being fabricated and is a single cavity, laminated fixture that can be used for both reaction and epoxy impregnation.

LQ & LM Status & Plan for FY08 – Fred Nobrega 5 LARP Collab. Meeting – SLAC, Oct , 2007 LQ Status Splice tooling design is complete and being fabricated.

LQ & LM Status & Plan for FY08 – Fred Nobrega 6 LARP Collab. Meeting – SLAC, Oct , 2007 LQ Status Reaction fixture roll over tooling in procurement.

LQ & LM Status & Plan for FY08 – Fred Nobrega 7 LARP Collab. Meeting – SLAC, Oct , 2007 LQ Status Feasibility of coil handling and subassembly handling is demonstrated with the LM, long dipole mirror: »coils, 2 m and 4 m »mirror magnets, 2 m and 4 m

LQ & LM Status & Plan for FY08 – Fred Nobrega 8 LARP Collab. Meeting – SLAC, Oct , 2007 LQ Status Coil and subassembly handling 4m Dipole Potted Coil 2m Dipole Cured Coil

LQ & LM Status & Plan for FY08 – Fred Nobrega 9 LARP Collab. Meeting – SLAC, Oct , m Dipole Potted Coil LM02 Clamped Assy

LQ & LM Status & Plan for FY08 – Fred Nobrega 10 LARP Collab. Meeting – SLAC, Oct , 2007 LQ Plan for FY08 Produce coils, produce coils, and produce coils! Design & procure instrumentation traces. Procure long lead magnet parts during the 1 st half of year. Procure remaining LQ magnet parts in 2 nd half of year as money becomes available. Prepare for magnet assembly in FY09.

LQ & LM Status & Plan for FY08 – Fred Nobrega 11 LARP Collab. Meeting – SLAC, Oct , 2007 FY08 LQ Schedule (as of Oct. 11)

LQ & LM Status & Plan for FY08 – Fred Nobrega 12 LARP Collab. Meeting – SLAC, Oct , 2007 LQ Conclusions The tooling length scale up for the LQ is nearly complete. Practice winding to begin within the next week. Long generic tooling used for the LHC quadrupoles is in place for the LQ practice coils in IB3. Valuable experience from moving LM dipole coils and subassemblies can be tapped into for LQ.

LQ & LM Status & Plan for FY08 – Fred Nobrega 13 LARP Collab. Meeting – SLAC, Oct , 2007 LM Status 2m LM01 PIT mirror:  Successfully tested to short sample limit (next page) 4m LM02 RRP mirror:  Clamps installed last week  Shell welding this week  Send to VMTF by end Oct. Long magnet infrastructure:  100% complete. Dipole Mirror Cross Section Schematic

LQ & LM Status & Plan for FY08 – Fred Nobrega 14 LARP Collab. Meeting – SLAC, Oct , 2007 LM 01, 2m PIT Mirror Dipole Quench History Short Sample Limit 2.2K By Emanuela Barzi

LQ & LM Status & Plan for FY08 – Fred Nobrega 15 LARP Collab. Meeting – SLAC, Oct , 2007 LM02 Reaction Tooling Experience

LQ & LM Status & Plan for FY08 – Fred Nobrega 16 LARP Collab. Meeting – SLAC, Oct , 2007 LM02 Reaction Tooling Experience

LQ & LM Status & Plan for FY08 – Fred Nobrega 17 LARP Collab. Meeting – SLAC, Oct , 2007 LM02 Reaction Tooling Experience Data used to gain confidence in Ansys analysis Magnet test will provide additional information on coil strain

LQ & LM Status & Plan for FY08 – Fred Nobrega 18 LARP Collab. Meeting – SLAC, Oct , 2007 LM plans Test 4m mirror dipole magnet by end of Oct. Investigate maximum coil strain. Determine cause of reaction tooling bow after heat treatment. »Does it cause degradation? Determine impact of tooling bow on LQ coils.

LQ & LM Status & Plan for FY08 – Fred Nobrega 19 LARP Collab. Meeting – SLAC, Oct , 2007 LM Conclusions The scale up of the 1m dipole mirrors to 2m using PIT strand was successfully demonstrated. The 4m (RRP) mirror magnet is about to be tested and will provide valuable information on coil degradation due to deflection. Feasibility of coil handling and subassembly handling is demonstrated with the long dipole mirror.