Windows 2000 Installation Process

There are three methods available to install the Windows 2000 operating system: Setup boot disks CD – Rom Over-the-network Installation Methods

Initiating the Installation from a Bootable CD-ROM Using a bootable CD-ROM is the simplest method of initiating the Windows 2000 Setup program, given that the computer's motherboard BIOS supports this capability. Once the Setup program is started, it works in several stages, prompting for information, copying files, and restarting. Start Setup from a bootable CD-ROM as follows: Insert the CD-ROM in the drive Restart the computer and wait for Setup to display a dialog box Follow the Setup instructions on the screen. The text mode installation phase that will follow is explained below in the "Text Mode Installation Phase" subsection

The following screen now appear and Windows 2000 will load in device drivers.

Soon you will see the following menu. Hit enter to set up Windows 2000.

The License Agreement will now appear, Read it and press "F8" if you agree or "ESC" if you don't.

The following screen will appear asking where you would like to install 2000, hit enter on the unpartitioned space to continue, if you wish you could set up partitions now. Otherwise hit enter to continue.

The following screen will now appear. Select how you wish to format the drive, for the normal user who doesn't need much security we would recommend FAT. Hit enter to continue.

You are now asked to confirm this decision. Hit enter to continue or "ESC" to return to previous menu.

Windows will start formatting your drive, if your Hard Drive is large then go get a cup of tea or have a drink to pass the time.

Once Formatted your system will reboot.

Once rebooted the following menu appears, Click on next to continue.

Windows 2000 setup will search and detect devices, this will take a few minutes.

Now the Regional settings menu will appear, Customize to your own locale. Click on next when finished

Now put in your preferred name and organization, click next when finished.

Now windows will ask for your 25 character product key (certificate of authenticity), enter and click on next.

Now for the Admin Password, Leave blank for the moment, this can be configured once you are in windows. Click on next to continue.

Now set the time and date, plus your time zone, once set click on next.

Windows 2000 will now detect and install network settings.

Now Network setup, just leave at typical and click next, this can be configured once in windows.

You will now be prompted for custom or express setup. Just hit enter for Express

Windows will start installing components

And then perform it's final tasks

Setup Wizard is now complete, click on finish.

Windows 2000 will now restart..

Network Identification wizard will appear, click on next.

Leave defaults (can be configured once in windows) click next.

Now that's completed click on finish.

As we never used an Administrator password windows will load directly up...

Apply your personal settings.

And arrive at the desktop

The End... You can now start configuring for personal use in the control panel.