The Pro HD is an auto sensing 12/24V, 50 Amp charger designed to charge any type of lead acid battery (AGM, GEL, or flooded cell) using the supplied clamps or NATO connector. It uses universal electrical input (110Vac – 250Vac). Smart charging with one-switch operation minimizes operator training requirements. The Pallet Charger is a 12V, 6.5 amp per channel, 12- station charging unit. It uses universal electrical input (110Vac – 250Vac). The charger can be connected to any type or size of 12V lead acid battery (AGM, GEL or flooded cell). Charge stations 1-12 each operate in isolation from one another, allowing any combination of batteries to be recharged at the same time. Battery Service and Maintenance System (BSES) NSN: Kit Includes: 1 – HD Pallet Charger 1 – Redi-Pulse Pro-HD 12/24V Charger 1– Redi-Pulse Pro-12 Maintainer 10 – MBT-1 Battery Testers 1 – 490PT Battery Analyzer Pallet Charger NSN: Pro HD NSN: Example: Pallet Charger in use. Example: ProHD Charger servicing all batteries (24V mode) on an FMTV. Example: ProHD Charger recovering back 2 batteries (12V mode) on an FMTV. APPENDIX 3. Lead Acid battery testing, charging and maintenance equipment and corresponding NSNs.

Dual 24V Charger NSN: The Dual 24V Charger is a 24V, 3.5 amp per channel, 2-station charging unit. It uses universal electrical input (110Vac – 250Vac). The charger can be connected to any type or size of 24V lead acid battery (AGM, GEL or flooded cell). The 2 charge channels operate in isolation from one another, allowing any combination of batteries to be recharged at the same time. 12V World Charger NSN: The 12V World Charger is a 12V, 20 amp per channel. It uses universal electrical input (110Vac – 250Vac). The charger can be connected to any type or size of 12V lead acid battery (AGM, GEL or flooded cell). 12 Station Bench Top Charger Part No: NSN: Pending; Can be ordered via part# and cage code, or credit card The 12 station Bench Top Charger is a 12V, 6.5 amp per channel, 12-station charging unit. It uses universal electrical input (110Vac – 250Vac). The charger can be connected to any type or size of 12V lead acid battery (AGM, GEL or flooded cell). Charge stations 1-12 each operate in isolation from one another, allowing any combination of batteries to be recharged at the same time. Example: 12 Station Bench Top Charger in use. Example: Dual 24V Charger in use. Example: 12V World Charger in use. APPENDIX 3. Lead Acid battery testing, charging and maintenance equipment and corresponding NSNs.

Dual Extreme 12V Charger NSN: The Dual 12V Charger is a 12V, 2.5 amp per channel, 2- station charging unit. It uses universal electrical input (110Vac – 250Vac). The charger can be connected to any type or size of 12V lead acid battery (AGM, GEL or flooded cell). The 2 charge channels operate in isolation from one another, allowing any combination of batteries to be recharged at the same time. Example: Extreme Dual 12V Charger in use. The RediPulse Pro-12® keeps new or recovered batteries from discharging while they are waiting to be used. 12 separate channels each capable of maintaining any type 12V lead acid battery (AGM, GEL and flooded). It uses universal electrical input (110Vac – 250Vac). Reverses the normal discharge rate and optimized high frequency patented pulsing reduces sulfation buildup. Reverse polarity protected. LED lights indicate the status of each individual battery. Pro-12 Battery Maintainer NSN: Example: Pro-12 maintaining recovered 12V batteries. APPENDIX 3. Lead Acid battery testing, charging and maintenance equipment and corresponding NSNs.

Digital Battery Analyzers perform analysis of 12-Volt battery and electrical system. The above testers are the most prevalent in the military. They are all classified under the same NSN, and are shown with the oldest model on the left and newest on the right. The testing algorithms differentiate battery configurations of AGM (flat and spiral plates), flooded cell and gel cell batteries and quickly display battery voltage, cold cranking amps, condition of the battery (Good & Pass, Good & Charge, Charge & Retest) and state of charge. The new 490PT+ has a built-in printer which can preserve a written description of the battery's condition. The replacement paper is available under NSN is Battery Analyzers NSN The MBT-1 makes checking for good and bad 12-Volt lead-acid batteries quick and easy. This weather resistant, mini battery load tester is small enough to slip in a pocket. It's simple to use with a fixed post positive connector and a coil-corded moveable negative connector. Easy to read color coded LEDs. Reverse polarity and over voltage protected Mini Battery Load Tester NSN: Example: 490PT+ being used to analyze a 12 battery. Example: MBT-1 being used for a 12V battery quick check APPENDIX 3. Lead Acid battery testing, charging and maintenance equipment and corresponding NSNs.

12 V - 5-Watt Solar Pulse Charger NSN Volt 6.3 Watt Pulse Solar Charger NSN Volt 6.3 Watt - Pulse Charge Monitor System NSN: Solar Pulse Charge Monitor System 6.3 Watt. Plugs into NATO Slave. NSN: V 6.3 Watt Pulse Charge system: Solar or AC charge system. System NSN: AC charge Only NSN: V PULSE CHARGE SYSTEM: Solar or AC charge system. System NSN AC charge Only NSN: APPENDIX 3. Lead Acid battery testing, charging and maintenance equipment and corresponding NSNs.