ISO 9001:2008 Co. Manufacturers & Exporters of Hydraulic Tank Jacking Equipments, Power Packs & Vacuum Boxes

About Suryoday Technologies Established in 2006 Most promising contender for Hydraulic Tank Jacking Equipment Only Hydraulic Jack manufacturing company with ISO 9001:2008 Workshop near Mumbai admeasuring 2,500 square meters Trained and experienced staff and technicians 2

Our Products 12MT Hydraulic Tank Jacking Equipments 18MT Hydraulic Tank Jacking Equipments 10/15/20 HP Power Packs Vacuum Box along with Vacuum Pump 3

12MT Hydraulic Tank Jacks 12MT Capacity single acting cylinders 100mm stroke length Inter-connected using high-pressure hydraulic hoses Operating Pressure: 106 bar or 1546 psi Tested Pressure: 160 bar or 2320 psi 4

18MT Hydraulic Tank Jacks 18MT Capacity double acting cylinders 100mm stroke length Inter-connected using high-pressure hydraulic hoses Operating Pressure: 140 bar or 2030 psi Tested Pressure: 212 bar or 3075 psi 5

12/18MT Hydraulic Tank Jacks 6

12MT Hydraulic Tank Jacks 7 Note: 1.50 nos. of Hydraulic Tank Jacks calculated for a standard tank diameter of 40m dia x 15m 450MT 2.1 no. of 50Ton Crane calculated if hired for full year

12MT Hydraulic Tank Jacks Tank Foundation 8

12MT Hydraulic Tank Jacks Erect Elevators on the Tank Bottom 9

12MT Hydraulic Tank Jacks Erect Top Shell on the Elevators 10

12MT Hydraulic Tank Jacks Install 12MT Hydraulic Tank Jacks 11

12MT Hydraulic Tank Jacks Erect Tank Roof and lift for Erection of next shell 12

12MT Hydraulic Tank Jacks Erect next Shell 13

12MT Hydraulic Tank Jacks Continue the last procedures till the full height of the tank is achieved. Remove Elevators and Erect Bottom Shell 14

12/18MT Hydraulic Tank Jacks SAFETY Hydraulic Tank Jacks are much more safe as compared to conventional method of tank fabrication No work to be executed above 4 meters from the tank bottom level Working at dizzying heights is not required as the tank is fabricated in reverse order, i.e. the roof is erected first and the first shell is erected last 15

12/18MT Hydraulic Tank Jacks ECONOMICS As seen earlier, Suryoday Technologies Hydraulic Tank Jacking Equipments can break-even well within three years against the expenses of a 50Ton Crane for erection. No skilled & expensive labor required for working at dizzying heights Very low on maintenance as compared to regular heavy expenses of a Crane No special scaffolding required as working at heights is not required 16

10HP / 15HP Power Packs Power Packs required for lifting 12MT Hydraulic Tank Jacks Usage of either 10HP or 15HP depends on the number of 12MT Hydraulic Tank Jacks Connected to Hydraulic Tank Jacks using high-pressure hydraulic hoses Hydraulic oil tank capacity of 250 liters 17

20HP Power Packs Power Packs required for lifting 18MT Hydraulic Tank Jacks Connected to Hydraulic Tank Jacks using high-pressure hydraulic hoses Hydraulic oil tank capacity of 300 liters 18

Vacuum Box with Vacuum Pump Used for testing of any leakages on the tank bottom Light-weight and can be moved around easily High accuracy level as soap-water bubble method is used 19

Types of Tank Floating Roof Tanks Double Walled Tanks Column Supported Tanks Storage Silos Tanks at an Elevation 20

Various Fabrication Projects Fabrication of tanks Dismantling of tanks Increase the height of tanks Decrease the height of tanks Increase the diameter of tanks Decrease the diameter of tanks Relocate tanks Replace tank bottoms Repair tank bottoms 21

Advantage over Conventional Method Shell erection is faster, reducing the time factor Lower risks of accidents and safety achievement is high Easy access for inspection at all stages Improved Quality of work Higher capacity cranes are not needed Special scaffolding arrangement is not required Safety in construction environment Over all cost reduction Versatile in operation inside refineries or in open fields 22

Suryoday Technologies ISO 9001:2008 Co. Plot No. H32, MIDC, Additional Murbad, Dist. Thane – INDIA Tel.: / / Web: 23